數據庫英文文獻

1、mysql數據庫英文文獻及翻譯  MySQL architecture is best understood in the context of its history. Thus, the two are discussed in the same chapter.MySQL History  MySQL history goes back to 1979 when Monty Widenius, working for a small companycalled TcX, created a reporting tool written in BASIC that ra

2、n on a 4 Mhzcomputer with 16 KB RAM. Over time, the tool was rewritten in C and ported to run on Unix. It was still just a low-level storage engine with a reporting front end. The tool was known by the name of Unireg.  Working under the adverse conditions of little computational resources, and

3、perhaps building on his God-given talent,Monty developed a habit and ability to write very efficient code naturally. He also developed, or perhaps was gifted from the start,with an unusually acute vision of what needed to be done to the code to make it useful in future developmentwithout knowing in

4、advance much detail about what that future development would be.  In addition to the above, with TcX being a very small company and Monty being one of the owners, he had a lot of say in what happened to his code. While there are perhaps a good number of programmers out there with Montys talent

5、and ability, for a number of reasons, few get to carry their code around for more than 20 years. Monty did.  Montys work, talents, and ownership of the code provided a foundation upon which the Miracle of MySQL could be built.  Some time in the 1990s, TcX customers began to push for an SQL

6、 interface to their data. Several possibilities were considered. One was to load it into a commercial database.Monty was not satisfied with the speed. He tried borrowing mSQL code for the SQL part and integrating it with his low-level storage engine. That did not work well,either. Then came the clas

7、sic move of a talented,driven programmer: “Ive had enough of those tools that somebody else wrote that dont work! Im writing my own!”  Thus in May of 1996 MySQL version 1.0 was released to a limited group, followed by a public release in October 1996 of version . The initial public release prov

8、ided only a binary distribution for Solaris. A month later, the source and the Linux binary were released.  In the next two years, MySQL was ported to a number of other operating systems as the feature set gradually increased. MySQL was originally released under a special license that allowed c

9、ommercial use to those who were not redistributing it with their software. Special licenses were available for sale to those who wanted to bundle it with their product. Additionally, commercial support was also being sold. This provided TcX with some revenue to justify the further development of MyS

10、QL,although the purpose of its original creation had already been fulfilled.  During this period MySQL progressed to version 3.22. It supported a decent subset of the SQL language, had an optimizer a lot more sophisticated than one would expect could possibly be written by one person, was extre

11、mely fast, and was very stable.Numerous APIs were contributed, so one could write a client in pretty much any existing programming language. However, it still lacked support for transactions,subqueries, foreign keys, stored procedures, and views. The locking happened only at a table level, which in

12、some cases could slow it down to a grinding halt. Some programmers unable to get around its limitations still considered it a toy, while others were more than happy to dump their Oracle or SQL Server in favor of MySQL, and deal with the limitations in their code in exchange for improvement in perfor

13、mance and licensing cost savings.  Around 19992000 a separate company named MySQL AB was established. It hired several developers and established a partnership with Sleepycat to provide an SQL interface for the Berkeley DB data files. Since Berkeley DB had transaction capabilities,this would gi

14、ve MySQL support for transactions, which it previously lacked.After some changes in the code in preparation for integrating Berkeley DB,version 3.23 was released.  Although the MySQL developers could never work out all the quirks of the Berkeley DB interface and the Berkeley DB tables were neve

15、r stable, the effort was not wasted.As a result, MySQL source became equipped with hooks to add any type of storage engine, including a transactional one.  By April of 2000, with 原文請找騰訊3249114六維-論文.網 ,ISAM, was reworked and released as MyISAM. Among a number of improvements,full-text searc

16、h capabilities were now supported. A short-lived partnership with NuSphere to add Gemini, a transactional engine with row-level locking, ended in a lawsuit toward the end of 2001. However, around the same time, Heikki Tuuri approached MySQL AB with a proposal to integrate his own storage engine,Inno

17、DB, which was also capable of transactions and row-level locking.  Heikkis contribution integrated much more smoothly with the new table handler interface already polished off by the Berkeley DB integration efforts. The MySQL/InnoDB combination became version 4.0, and was released as alpha in O

18、ctober of 2001. By early 2002 the MySQL/InnoDB combo was stable and instantly took MySQL to another level. Version 4.0 was finally declared production stable in March 2003.  It might be worthy of mention that the version number change was not caused by the addition of InnoDB. MySQL developers h

19、ave always viewed InnoDB as an important addition, but by no means something that they completely depend on for success.Back then, and even now, the addition of a new storage engine is not likely to be celebrated with a version number change. In fact, compared to previous versions,not much was added

20、 in version 4.0. Perhaps the most significant addition was the query cache, which greatly improved performance of a large number of applications.Replication code on the slave was rewritten to use two threads: one for network I/O from the master, and the other to process the updates. Some improvement

21、s were added to the optimizer. The 1506mysql數據庫英文文獻及翻譯client/server protocol became SSL-capable.  Version 4.1 was released as alpha in April of 2003, and was declared beta in June of 2004. Unlike version 4.0, it added a number of significant improvements. Perhaps the most significant was subque

22、ries, a feature long-awaited by many users. Spatial indexing support was added to the MyISAM storage engine. Unicode support was implemented. The client/server protocol saw a number of changes. It was made more secure against attacks, and supported prepared statements.  In parallel with the alp

23、ha version of 4.1, work progressed on yet another development branch: version 5.0, which would add stored procedures, server-side cursors,triggers, views, XA transactions, significant improvements in the query optimizer,and a number of other features. The decision to create a separate development br

24、anch was made because MySQL developers felt that it would take a long time to stabilize 4.1 if, on top of all the new features that they were adding to it, they had to deal with the stored procedures. Version 5.0 was finally released as alpha in December 2003. For a while this created quite a bit of

25、 confusionthere were two branches in the alpha stage. Eventually 4.1 stabilized (October 2004), and the confusion was resolved.  Version 5.0 stabilized a year later, in October of 2005.  The first alpha release of 5.1 followed in November 2005, which added a number of improvements, some of

26、 which are table data partitioning, row-based replication,event scheduler, and a standardized plug-in API that facilitates the integration of new storage engines and other plug-ins.  At this point, MySQL is being actively developed. 5.0 is currently the stable version,while 5.1 is in beta and s

27、hould soon become stable. New features at this point go into version 5.2.MySQL Architecture  For the large part, MySQL architecture defies a formal definition or specification.When most of the code was originally written, it was not done to be a part of some great system in the future, but rath

28、er to solve some very specific problems. However,it was written so well and with enough insight that it reached the point where there were enough quality pieces to assemble a database server.Core Modules  I make an attempt in this section to identify the core modules in the system. However,let

29、me add a disclaimer that this is only an attempt to formalize what exists.MySQL developers rarely think in those terms. Rather, they tend to think of files,directories, classes, structures, and functions. It is much more common to hear “This happens in mi_open( )” than to hear “This happens on the M

30、yISAM storage engine level.” MySQL developers know the code so well that they are able to think conceptually on the level of functions, structures, and classes. They will probably find the abstractions in this section rather useless. However, it would be helpful to a person used to thinking in terms

31、 of modules and managers.  With regard to MySQL, I use the term “module” rather loosely. Unlike what one would typically call a module, in many cases it is not something you can easily pull out and replace with another implementation. The code from one module might be spread across several file

32、s, and you often find the code from several different modules in the same file. This is particularly true of the older code. The newer code tends to fit into the pattern of modules better. So in our definition, a module is a piece of code that logically belongs together in some way, and performs a c

33、ertain critical function in User Authentication Module Access Control Module Parser Command Dispatcher Query Cache Module Optimizer Table Manager Table Modification Modules Table Maintenance Module Status Reporting Module Abstracted Storage Engine Interface (Table Handler) Storage Engine Implementat

34、ions (MyISAM, InnoDB, MEMORY, Berkeley DB) Logging Module Replication Master Module Replication Slave Module Client/Server Protocol API Low-Level Network I/O API Core APIInteraction of the Core Modules  When the server is started on the command line, the Initialization Module takes control.It p

35、arses the configuration file and the command-line arguments, allocates global memory buffers, initializes global variables and structures, loads the access control tables, and performs a number of other initialization tasks. Once the initialization job is complete, the Initialization Module passes c

36、ontrol to the Connection Manager, which starts listening for connections from clients in a loop.mysql數據庫英文文獻及翻譯  When a client connects to the database server, the Connection Manager performs a number of low-level network protocol tasks and then passes control to the Thread Manager, which in tu

37、rn supplies a thread to handle the connection (which from now on will be referred to as the Connection Thread). The Connection Thread might be created anew, or retrieved from the thread cache and called to active duty. Once the Connection Thread receives control, it first invokes the User Authentica

38、tion Module.The credentials of the connecting user are verified, and the client may now issue requests.  The Connection Thread passes the request data to the Command Dispatcher. Some requests, known in the MySQL code terminology as commands, can be accommodated by the Command Dispatcher directl

39、y, while more complex ones need to be redirected to another module. A typical command may request the server to run a query, change the active database, report the status, send a continuous dump of the replication updates, close the connection, or perform some other operation.  In MySQL server

40、terminology, there are two types of client requests: a query and a command. A query is anything that has to go through the parser. A command is a request that can be executed without the need to invoke the parser. We will use the term query in the context of MySQL internals. Thus, not only a SELECT

41、but also a DELETE or INSERT in our terminology would be called a query. What we would call a query is sometimes called an SQL statement.  If full query logging is enabled, the Command Dispatcher will ask the Logging Module to log the query or the command to the plain-text log prior to the dispa

42、tch. Thus in the full logging configuration all queries will be logged, even the ones that are not syntactically correct and will never be executed, immediately returning an error.  The Command Dispatcher forwards queries to the Parser through the Query Cache Module. The Query Cache Module chec

43、ks whether the query is of the type that can be cached, and if there exists a previously computed cached result that is still valid.In the case of a hit, the execution is short-circuited at this point, the cached result is returned to the user, and the Connection Thread receives control and is now r

44、eady to process another command. If the Query Cache Module reports a miss, the query goes to the Parser, which will make a decision on how to transfer control based on the query type.  One can identify the following modules that could continue from that point: the Optimizer, the Table Modificat

45、ion Module, the Table Maintenance Module, the Replication Module, and the Status Reporting Module. Select queries are forwarded to the Optimizer; updates, inserts, deletes, and table-creation and schema-altering queries go to the respective Table Modification Modules; queries that check, repair, upd

46、ate key statistics, or defragment the table go to the Table Maintenance module;queries related to replication go to the Replication Module; and status requests go to the Status Reporting Module. There also exist a number of Table Modification Modules: Delete Module, Create Module, Update Module, Ins

47、ert Module, and Alter Module.  At this point, each of the modules that will receive control from the Parser passes the list of tables involved in the query to the Access Control Module and then, upon success,to the Table Manager, which opens the tables and acquires the necessary locks.Now the t

48、able operation module is ready to proceed with its specific task and will issue a number of requests to the Abstracted Storage Engine Module for low-level operations such as inserting or updating a record, retrieving the records based on a key value, or performing an operation on the table level, su

49、ch as repairing it or updating the index statistics.  The Abstracted Storage Engine Module will automatically translate the calls to the corresponding methods of the specific Storage Engine Module via object polymorphism.In other words, when dealing with a Storage Engine object, the caller thin

50、ks it is the caller does not need to be aware of the exact object type of the Storage Engine object.  As the query or command is being processed, the corresponding module may send parts of the result set to the client as they become available. It may also send warnings or an error message.

51、 If an error message is issued, both the client and the server will understand that the query or command has failed and take the appropriate measures. The client will not accept any more result set, warning, or error message data for the given query, while the server will always transfer control to

52、the Connection Thread after issuing an error. Note that since MySQL does not use exceptions for reasons of implementation stability and portability, all calls on all levels must be checked for errors with the appropriate transfer of control in the case of failure.  If the low-level module has m

53、ade a modification to the data in some way and if the binary update logging is enabled, the module will be responsible for asking the Logging Module to log the update event to the binary update log, sometimes known as the replication log, or, among MySQL developers and power users, the binlog. 

54、 Once the task is completed, the execution flow returns to the Connection Thread,which performs the necessary clean-up and waits for another query or command from the client. The session continues until the client issues the Quit command.  In addition to interacting with regular clients, a serv

55、er may receive a command from a replication slave to continuously read its binary update log. This command will be handled by the Replication Master Module.  If the server is configured as a replication slave, the Initialization Module will call the Replication Slave Module, which in turn will

56、start two threads, called the SQL Thread and the I/O thread. They take care of propagating updates that happened on the master to the slave. It is possible for the same server to be configured as both a master and a slave.mysql數據庫英文文獻及翻譯 Network communication with a client goes through the Clie

57、nt/Server Protocol Module,which is responsible for packaging the data in the proper format, and depending on the connection settings, compressing it. The Client/Server Protocol Module in turn uses the Low-Level Network I/O module, which is responsible for sending and receiving the data on the socket

58、 level in a cross-platform portable way. It is also responsible for encrypting the data using the OpenSSL library calls if the connection options are set appropriately.  As they perform their respective tasks, the core components of the server heavily rely on the Core API. The Core API provides

59、 a rich functionality set, which includes file I/O, memory management, string manipulation, implementations of various data structures and algorithms, and many other useful capabilities. MySQL developers are encouraged to avoid direct libc calls, and use the Core API to facilitate ports to new platf

60、orms and code optimization in the future.Writer：Sasba pacbev譯文：深入理解MySQL核心技術姓名：苗月明       學號：0651135MySQL的歷史與架構  MySQL的架構的最好的理解是從他的歷史背景中去發現。MySQL的歷史    MySQL的歷史可以追溯到1979年，當時蒙蒂維德紐斯，在一家名為TcX的小公司工作，他用BASIC語言創造了一個報告工具，在這個報告工具的基礎 上他在16KB的RAM中寫了4跑道的Mhzcomputer。隨著時間的推移，該工具被用C語言重新編寫并且移植到Unix系統上運行。但它任然只是一 個有前端報告的低級別存儲引擎。該工具被稱為Unireg。    在計算資源少的不利條件啊，也許只是靠著上帝賜予他的創造天賦，蒙蒂自然而然的開發了一種習慣和能力去編寫有效的代碼。在不會事先知道許多細節關于未來的 發展方向，他任然憑借他異常尖銳的眼光去開發了那些對未來發展有很大幫助的代碼，后者可以說也許這是從一開始就賜