天璽軟件ts808改串平臺v2.1324.00sn writer introduction

1、2012/12/16Presenter (Wenping Liu)Department (ACS7/ST)Title: Usage to MTK SN_STATION Tool2022/7/8Copyright MediaTek Inc. All rights reserved.1AgendaIntroductionSN_STATION Tool Operator ProcedureUI & Write Example Feature Phone BT address(Meta mode)Feature Phone Barcode (AT mode)Smart Phone IMEI(Meta

2、mode)Introduction2022/7/8Copyright MediaTek Inc. All rights reserved.3Introduction 1/2SN_STATION ToolUSB/UART CablePC SideHandset Side2022/7/8Copyright MediaTek Inc. All rights reserved.4Introduction 2/2MTK SN_STATION tool has four major functionalities:Barcode - Production Serial Number for a PCBA,

3、 is usually use to identify PCBA. Each PCBA should have a barcode number to keep the its test item in production line. So Barcode should be write to PCBA first after Bin download, or before ATE calibration, support max 64 decimal digitsIMEI - International Mobile Equipment Identity, is a number uniq

4、ue to every GSM and WCDMA phone, 14 decimal digits + 1 check digitWifi Mac Address : 12 decimal digitsBT Address : 12 decimal digitsFour IN One: - You also can use the Four IN one function that can write Barcode, IMEI, Bt address, Wifi Mac address at a timeTool Operator Procedure2022/7/8Copyright Me

5、diaTek Inc. All rights reserved.6SN_STATION Tool Operator Procedure 1/21. Select the target mobile Connection setting : use USB or UART. - If choose UART, please select correct baud rate, default is 1152002. Select the Operator Mode : Meta/ AT mode - If select the Meta mode, must load correct NVRAM

6、datebase of MAUI; AT mode dont need NVRAM database file - Note: Current AT mode only support Feature Phone3. Select the operation to Platform and Function : Feature/Smart Phone4. Select the NVRAM database file(if AT mode, this step can pass) - If platform is Smart Phone, AP database and modem databa

7、se must load2022/7/8Copyright MediaTek Inc. All rights reserved.7SN_STATION Tool Operator Procedure 2/25. Click the START Button to commence the write operator - Note: If Device is Datacard(such 76M datacard), please checked the Switch_data_card at the top-right corner.6. Input the correct data and

8、click Enter Button to wait for connecting target7. Inset the USB cable to connect with Target - This is for Meta mode; If AT mode, the Dialog box appear after connect with target - The dialog box reappear again when the barcode or IMEI has been successfully written, right now you can connect the nex

9、t handset with USB cable8. The operator result display on main UI : - Write Result Indicator turn Green mean Success, Red mean FailUI & Write Example2022/7/8Copyright MediaTek Inc. All rights reserved.9UI & Write Example Feature Phone BT address(Meta mode)1) Set Function Select to “Write BT Address”

10、 + “Feature Phone” + “Meta mode”2) Select COM PORT “USB ”3) Select the database file for your phone4) Press the “START” button 5) Scan the BT address, then press “Enter” button or type “Enter” key6) Now insert the USB cable make your phone to enter META mode7) Wait for the operator result, if the “W

11、rite Result Indicator” turn Green mean the operator is successfully, else if “Write Result Indicator” turn Red mean the operator is Fail1254372022/7/8Copyright MediaTek Inc. All rights reserved.10UI & Write ExampleFeature Phone write Barcode(AT mode)1) Set Function Select to “Write Barcode” + “Featu

12、re Phone” + “AT mode” 2) Select COM PORT “USB ” 3) Press the “START” button 4) Now insert the USB cable to power on your phone 5) Scan the Barcode, then press “Enter” button 6) Wait for the operator result, if the “Write Result Indicator” turn Green mean the operator is successfully, else if “Write

13、Result Indicator” turn Red mean the operator is Fail153262022/7/8Copyright MediaTek Inc. All rights reserved.11UI & Write ExampleSmart Phone write IMEI(Meta mode) 1) Set Function Select to “Write IMEI” + “Smart Phone” + “Meta mode” 2) Select COM PORT “USB ” 3) Select the database file for your phone

14、 4) Press the “START” button 5) Scan the IMEI , then press “Enter” button 6) Now insert the USB cable make your phone to enter META mode 7) Wait for the operator result, if the “Write Result Indicator” turn Green mean the operator is successfully, else if “Write Result Indicator” turn Red mean the o

15、perator is Fail 8) Note: if IMEI Option check the Lock IMEI, this mean the IMEI can only write one times if operator is successfully. If you want to rewrite IMEI again, you must Format FAT!234571Q & A2022/7/8Copyright MediaTek Inc. All rights reserved.131、What can I analyse when the operator fail?- Actually all operator log information display on the main UI,such as 2、If you want to get help from MTK, what information should I offer?- As the No.1 refer , you can provide the UI Log and the META_DLL.log file,and the