混凝土框架剪力墻中、英文摘要.doc_第1頁
混凝土框架剪力墻中、英文摘要.doc_第2頁
混凝土框架剪力墻中、英文摘要.doc_第3頁
混凝土框架剪力墻中、英文摘要.doc_第4頁
免費預覽已結束,剩余1頁可下載查看

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

北京建筑工程學院土木工程專業畢業設計(論文) 第 5 頁摘要本工程為公寓式辦公樓 所謂“公寓式辦公樓”,是指單元式小空間劃分、每個單元平均建筑面積不大于150平方米、有獨立衛生設備的辦公建筑。此種物業因面積較小且相對獨立,較適合小型公司辦公,但它仍屬辦公樓而非住宅。一、工程概況: 1、工程所在地:豐臺區靛廠路 2、工程名稱:錦鼎商務大廈 3、建筑面積:12900平方米 4、層數:地上9層,地下2層 5、層高:首層層高為4米,二層至九層層高均為3.2米,室內外高差0.45米。6、外圍護墻采用250mm陶??招拇u砌塊墻體(外保溫),內墻采用150mm陶??招拇u砌塊墻體7、 結構體系:框架-剪力墻8、 主要建筑材料:鋼筋、混凝土、砂漿、陶粒空心磚砌塊9、 防火要求:采用高層民用建筑設計防火規范GB50045-95(2001年版)。建筑分類為二類,地上地下均為1級 電梯:設四部液壓電梯,其中一部為消防電梯, 樓梯:設兩部樓梯,均為封閉樓梯二、建筑設計 1、建筑設置三個出入口,其中西側主出入口與北側出入口均設有無障礙坡道 2、平面布置:首層設置庫藏室、資料室、接待室、廳室、安保監控室、物業管理,二層至九層為辦公區。 3、中型會議室按照無桌椅,即0.8平米每人,70人使用來設計;小型會議室按照有桌椅,即1.8平米每人,30人使用來設計 4、設備專業用房每層1間,20 -30 m 5、使用人數規??刂疲喊?00人,男女比例7:3三、結構設計 結構形式現澆鋼筋混凝土框架剪力墻結構; 樓蓋結構樓蓋及屋蓋采用普通鋼筋混凝土現澆樓板; 1、結構計算內容 (1) 荷載計算。 (2) 樓蓋與屋蓋設計。 (3) 地震作用與綜合框架與剪力墻的剛度計算。 (4) 地震作用計算與位移驗算。 (5) 地震作用下綜合框架與剪力墻內力計算,地震作用一榀框架一榀內力 計算。 (6) 重力荷載作用下框架內力計算。 (7) 框架內力組合。 (8) 框架梁與柱配筋計算。 (9) 剪力墻內力與配筋計算。 (10) 基礎設計。關鍵詞:公寓式辦公樓、框架-剪力墻、混凝土、無障礙、現澆AbstractThis project is the apartment-office building The so-called apartment building refers to the space divided into small units, whose average floor area is not more than 150 square meters with every unit , and an office building with separate sanitary facilities. This architecture form is more suitable for small companies because of the smaller and relatively independent.But it is still an office buildings rather than dwelling house. First, the profile of the project: 1, Location: Dian-Chang Road, Fengtai District. 2, Name: Jin-Ding Commercial Building. 3, The architectural area: 12,900 square meters. 4, Rise: 9 on the ground floor, the ground floor of 2 storey. 5, story height: the first story is 4 meters high, and others are 3.2 meters high. The difference between indoor and outdoor are 0.45 meters high. 6, The building envelope outside is the ceramsite hollow block of 250 thickness (the insulation outside), and the interior walls is 150. 7, The structural system: a frame-sheer wall structure. 8, The main construction materials: steel, concrete, mortar, ceramic hollow brick block. 9, The fire safety requirements: the fire safety in the design of tall buildings of GB50045-95 (2001). The Classified of the building is II, and the fire safety requirement of the whole building is the first. Elevator: four hydraulic elevators, one of them is for the firemans lifts, Staircase: two for the stairs, all of them are the closed stairs. Second, the architectural design 1, Three access, of which is the main in the west side ,which is equipped with barrier-free ramp and the same as the door in the northern side. 2, Layout: There are storehouse, reference room, reception room, hall, security and supervisor room, property management Room, from two floor to nine are offices.3, Medium-sized conference room which except for tables and chairs. That is 0.8 square meters per person and 70 people in all; Small conference rooms which in accordance with tables and chairs. That is 1.8 square meters per person and 30 people in all. 4, There is an equipment room on each floor, which is ahout 20 to 30 square meters 5, the scale of people : 600 people, and male to female ratio is 7:3 .Third, the structural design Structure style: the frame-sheer wall of the cast-in-place reinforced concrete structure; Floor construction : the floor and roof are cast-in-place reinforced concrete floor slab; 1, the structure calculations (1) Load computation. (2) The floor and roof design. (3) The role and the Integrated Framework for the earthquake and the stiffness of shear wall calculation. (4) The role of earthquake displacement calculation and checking. (5) under the Integrated Framework for the earthquake and the wall of internal forces. (6) Gravity loads calculated under the framework of internal forces. (7) Combination of the framework of internal forces. (8) Frame b

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

最新文檔

評論

0/150

提交評論