化工設備英文名稱大全

1、目 錄 contents1. 工藝設備process equipment 11.1. 塔 column 11.1.1. 板式塔和填料塔 plate column and packed column 11.1.1.1. 液流型式 liquid - flow patterns 21.1.1.2. 泡罩（帽）塔盤bubble cap trays 31.1.1.3. 浮閥塔盤valve trays 41.1.1.4. 篩板塔盤sieve trays 61.1.1.5. 穿流式塔盤和噴射型塔盤dual - flow trays and jet trays 71.1.1.6. 塔盤的支承supports

2、of tray 81.1.1.7. 塔底結構及重（再）沸器bottom structures and reboilers 91.1.1.8. 進料和抽出 feed and draw - off 101.1.1.9. 填料 packing 121.1.1.10. 液體分配 （布） 器， 再分配 （布） 器及填料支持版liquid distributors,redistributors and support plates 131.1.1.11. 塔附件 tower attachments 141.1.1.12. 樓梯（梯子）和平臺 stair and platform 151.1.2. co2

3、吸收塔co2 absorber 161.1.3. 再生塔 /co2 汽提塔 regenerator / co2 stripper 171.1.4. 造粒塔 prill tower 181.1.4.1. （ 造粒塔 ） 總 圖 及 造粒 噴 頭 組 裝 圖 general assembly andprill-spray assembly 181.1.4.2. 造粒塔 扒料機prill tower reclaimer 201.2. 反應器 reactor 221.2.1. 氨合成塔 ammonia converter 221.2.2. 聚合釜polymerizer 241.2.3. 電解槽 cel

4、l 261.2.3.1. 隔膜電解槽diaphragm cells 261.2.3.2. 水銀電解槽mercury cells 271.3. 貯罐 storage tanks 281.3.1. 浮頂罐 floating roof tanks 301.3.1.1. 浮頂型式 floating roof types 321.3.1.2. 浮頂罐的密封形式seal types of floating roof tank 341.3.2. 內浮頂罐 covered floating roof tanks 351.3.3. 低溫貯罐r(nóng)efrigerated storage tanks 361.4. 蒸發

5、器evaporators 371.5. 換熱器heat exchangers 381.5.1. 換熱器的名稱nomenclature of heat exchanger 401.5.1.1. 換熱器部件components of heat exchanger 401.5.1.2. 固定端頭蓋(或管箱) ，殼體及后端頭蓋型式types of stationaryhead, shell and rear end head 421.5.1.3. 管板 tube sheets 431.5.1.4. 管子管板連接，膨脹節及其他零件 tube-tube sheet joints,expansion joi

6、nts and other parts 441.5.1.5. 橫向折流板和縱向折流板transverse baffles and longitudinalbaffles 461.5.2. 套管式換熱器和刮面式換熱器double-pipe heat exchanger andscraped-surface exchanger 471.5.3. 套管式縱向翅片換熱器double pipe longitudinal finned exchanger481.5.4. 板式換熱器plate-type exchangers 491.5.5. 蒸汽表面冷凝器，凝汽器steam surface condens

7、ers 501.5.6. 空冷器，空氣冷卻器air-cooled heat exchangers 511.5.6.1. 空 冷 器 的 組 合 形 式 bay arrangements of air-cooled heatexchanger 521.5.6.2. 管束和頭蓋（管箱）的典型結構typical constructionof tubebundles and headers 531.5.6.3. 空冷器的驅動裝置1.5.6.4. 翅片 fins 551.5.6.5. 空冷器的溫度控制1.5.7. 冷卻塔，涼水塔（ 1）drive arrangements for air cooler

8、54temperature control of air cooler 56cooling towers( i ) 57冷卻塔，涼水塔(2) cooling towers( h ) 581.6. 工業爐 furnace 601.6.1. 管式加熱爐 pipe heater 601.6.1.1. 管式加熱爐型式types of pipe heaters (pipe still heater) 601.6.1.2. 加熱爐 heaters 621.6.1.3. 燃燒器，燒嘴burners 631.6.1.4. 爐管，聯管箱和回彎頭tube, headers and return bends 641

9、.6.1.5. 管架tube supports 651.6.2. 轉化爐reformers (reforming furnaces) 661.6.3. 二段轉化爐 secondary reformer 671.6.4. 變換爐shift converter 681.6.5. 熱回收和廢熱鍋爐 heat recovery and waste heat boiler 691.6.5.1. 熱回收heat recovery 691.6.5.2. co 燃燒廢熱鍋爐 co firing waste heat boiler 701.6.5.3. 第一廢熱鍋爐 primary waste heat boi

10、ler 711.6.5.4. 第二廢熱鍋爐 secondary waste heat boiler 721.6.6. 火炬 flare stacks 731.7. 混合設備mixing equipment 741.7.1. 攪拌器型式(1) types of agitator( 1)74攪拌器型式(2) types of agitator( h) 761.7.2. 混合(攪拌)槽mixing tanks 771.7.3. 管道混合器line mixers (flow mixers) 781.7.4. 靜止混合器static mixers 791.7.5. 膏狀物料及粘性物料混(拌)合設備pas

11、te and viscous-materialmixing equipments 801.7.6. 固體混合機械solids mixing machines 821.7.7. 雙螺桿連續混合機double screw continuous mixer 831.8. 萃取器extractors 841.8.1. 連續萃取設備，連續抽提設備continuous contact (differentialcontact) equipments 841.8.2. 浸提設備leaching equipments 861.9. 旋風分離器、沉清器、過濾器和離心機cyclone, decanter, fil

12、ter andcentrifuge 871.9.1. 旋風分離器(1) cyclone separators ( i) 87旋風分離器(2) cyclone separators ( h ) 881.9.2. 氣體洗滌器gas scrubbers 901.9.3. 沉降罐，澄清器gravity settlers (decanters) 921.9.4. 過濾機filter 931.9.4.1. 壓濾機pressure filters 931.9.4.2. 葉濾機pressure leaf filters941.9.4.3. 袋式過濾器bag filters 951.9.4.4. 轉鼓真空過濾機

13、rotary-drum vacuum filter 961.9.5. 離心式分離機centrifugal separator 971.9.5.1. 雙鼓真空離心過濾機double-bowl vacuum centrifuge 971.9.5.2. 離心機centrifuges 981.9.5.3. 靜 止 葉 片 型 離 心 式 分 離 器 stationary vane type centrifugalseparators 1001.10. 干燥器dryers 1011.10.1. 間接干燥器indirect dryers 1011.10.2. 直接干燥器direct dryers 1021

14、.10.3. 噴霧干燥器spray dryers 1041.10.3.1. 霧化噴頭，噴霧嘴，霧化器spray nozzles (atomizers) 1051.10.4. 氣流 (氣動 )輸送干燥器pneumatic conveyor dryers 1061.11. 其他 miscellaneous 1071.11.1. 石 油 煉 制 中 的 流 化 過 程 fluidization processes in petroleum refinery 1071.11.1.1. 流態化 fluidization 1081.11.1.2. 流化床分布器distributors for fluidi

15、zed bed 1091.11.2. 破沫器及其應用 demister and its applications 1101.11.2.1. 破沫網的安裝和纖維除霧器installation of mesh and fiber misteliminator 1111.11.3. 設備的支座和封頭supports and heads of equipments 1121.11.4. 立式容器的外部保溫external thermal insulation for vertical vessel1132. 泵 pump 1142.1. 各種型式的泵(1) various types of pump

16、( i ) 114各種型式的泵(2)varioustypesof pump(h)116各種型式的泵(3)varioustypesof pump(m)117各種型式的泵(4)varioustypesof pump(iv)1182.2. 離心泵(1)centrifugalpump( i ) 119離心泵(2) centrifugal pump( h ) 120離心泵(3)centrifugal pump( m) 1212.3. 管道泵 inline pump 1222.4. 雙作用蒸汽往復泵duplex acting steam-driven reciprocating pump1232.5. 雙

17、作用活塞式往復泵double action reciprocating pump, bucket type1242.6. 混流泵mixed-flow pump 1262.7. 計量泵 metering pumps 1272.8. 噴射泵 jet pumps 1282.9. 噴射裝置ejector units 1292.9.1. 噴射器的結構ejector structures 1303. 壓縮機、鼓風機和風機compressors blowers and fans 1313.1. 螺桿壓縮機screw compressors 1313.2. 旋轉式螺桿壓縮機rotary helical scr

18、ew compressors 1323.3. 活塞式壓縮機piston compressors 1333.4. 往復式壓縮機reciprocating compressors 1343.5. 低密度聚乙烯(超 )高壓壓縮機high pressure compressor for lowdensity polyethylene process 1363.5.1. 高壓氣缸和中心型組合閥 high-pressure cylinder and central valve 1383.5.2. 卸荷閥并及其他閥 unloading valve and other valves 1403.6. 水平剖分式

19、離心壓縮機horizontally split centrifugal compressor 1423.7. 鼓風機，壓氣機blowers 1443.8. 風機 fans 1463.9. 典型的空氣壓縮機裝置typical compressor installation 1484. 輸送機和提升機conveyor and elevator 1494.1. 垂直提升 （輸送 ）機 vertical elevator （conveyor） 1494.1.1. 斗式提升機bucket elevator 1494.1.2. 垂直提升輸送機和箱類提升機vertical rising conveyor a

20、nd caseelevator 1504.1.3. 雙帶提升機twin riser 1514.2. 帶式輸送機band （belt） conveyor 1524.2.1. 帶式輸送機示意圖 band conveyor sketch 1524.2.2. 輸送機系統conveyor systems 1534.2.3. 帶式輸送機band conveyor 1544.2.4. 中心距超過600 英尺的單輪傳動帶式輸送機用的張緊裝置take-upunit for single drum drive belt conveyor exceeding 600 feet centers 1554.2.5. 雙

21、輪傳動帶式輸送機的張緊裝置take-up unit for dual drum drivebelt conveyor 1564.2.6. 拼裝式皮帶運輸機和移動式皮帶運輸機pre-built sectional beltconveyor and mobile belt conveyor 1574.3. 螺旋輸送機screw conveyor 1584.4. 吊掛式鏈輸送機和振動輸送機chain trolley conveyor and vibratingconveyor 1594.4.1. 吊掛式鏈輸送機部件 units of chain trolley conveyor 1604.5. 輥?zhàn)?/p>

22、輸送機roller conveyors 1624.6. 惰輪 （托輥 ）型式types of idlers 1634.6.1. 托輥 （惰輪 ）結構 construction of iders 1645. 破碎和篩分設備crushing and screening equipment 1665.1. 顎式破碎機jaw crusher 1665.2. 顎式?jīng)_擊破碎機impact jaw crusher 1685.3. 回轉球形破碎機gyrasphere crusher 1695.4. 盤式回轉破碎機tray type gyratory crusher 1705.5. 液壓錐形破碎機和沖擊式破碎機

23、（葉片破碎機） hydraulic cone crusherand impact crusher （impeller breaker） 1725.6. 輥?zhàn)臃鬯闄C(jī)roller mill 1735.7. 雙軸錘擊破碎機double shaft hammer mill 1745.8. 球磨機 ball mill 1765.9. 干燥粉磨機dryer-pulveriser 1775.10. 返混設備布置layout of back mixing equipment 1785.11. 振動篩vibrating screen 1795.12. 分級機classifiers 1806. 塑料和橡膠加工成型

24、機械forming machine for plastics and rubber 1816.1. 擠壓機 extruder 1816.2. 螺桿注塑機screw injection molding machine 1826.3. 聚氯乙烯輥壓機生產線calender line for pvc production 1836.4. 四輥輥壓機four-roll calender 1847. 給料機，稱量器和包裝機feeder, weighing and bagging machine 1867.1. 振動給料機vibrating feeder 1867.2. 電振動給料機electric vi

25、brating feeder 1887.3. 板式給料機apron feeder 1897.4. (粉末 )均勻自動給料機smooth auto-feeder 1907.5. 帶式計量秤dosing belt weigher 1917.6. 定量給料秤constant feed weigher 1927.7. 自動裝袋系統automatic bagging system 1938. 汽輪機 steam turbine 1948.1. 汽輪機的分類(1) classification of steam turbines ( i) 194汽輪機的分類(2) classification of st

26、eam turbines ( h ) 1968.2. 汽輪機的循環steam turbine cycles 1978.4. 單級汽輪機8.5. 沖動式汽輪機8.6. 汽輪機軸封8.7. 汽輪機的潤滑8.3. 汽輪機供汽方式methods of steam supply to a turbine 198single stage steam turbine 199impulse turbines 200turbine glands and gland sealings 202lubrication of steam turbine 2048.8. 汽輪機調速器及調速governors and go

27、verning of steam turbine 2068.9. 汽輪機調速器turbine governor 2088.10. 超速脫扣裝置(保安器) overspeed tripping device 2108.11. 汽輪機的安裝 installation of steam turbine 2119. 鍋爐 boiler 2129.1. 火管鍋爐及水管鍋爐的基本型式basic patterns for fire and water tubeboiler 2129.2. 橢圓管板換熱器ellipsoidal shell and tube heat exchanger 2139.3. 水冷管

28、夾套換熱器cooling tubes and jacket heat exchanger 2149.4. 蒸汽凈化及鍋筒內件(1) steam purification and drum internals ( i) 215蒸汽凈化及鍋筒內件(2) steam purification and drum internals (h ) 216蒸汽凈化及鍋筒內件(3) steam purification and drum internals (m) 218蒸汽凈化及鍋筒內件(4) steam purification and drum internals ( iv) 2199.5. 過熱器sup

29、erheater 2209.6. 減溫器 attemperators 2219.7. 空氣預熱器air preheater 2229.8. 爐排 grates 2249.9. 下飼爐排 underfeed stoker 2259.10. 噴燃器，燃燒器burners 2269.11. 省煤器economizer 2289.12. 拋煤機spreader feeders 2299.13. 磨煤機pulverizers 23010. 機械零件machine element 23110.1. 萬向節funiversal joints 23110.2. 聯軸器couplings 23210.3. 液力

30、聯軸器(1) fluid couplings ( i) 234液力聯軸器(2) fluid couplings ( h ) 23510.4. 軸頸密封，圓周密封circumferential seals 23610.5. 端面密封，軸封，軸端連接件face seals, shaft sealings and endfittings 23710.6. 滾子軸承，滾柱軸承roller bearings 23810.7. 球軸承，滾珠軸承ball bearings 23910.8. 加油機構 oiling devices 24010.9. 緊固件 fastener 24110.9.1. 螺栓和雙頭螺

31、柱bolts and studs (stud bolts) 24110.9.2. 螺釘?shù)念^部和端部型式heads and points of screw 24210.9.3. 螺母 nuts 24310.9.4. 非螺紋緊固件 non-threaded fasteners 24411. 配管 (管路 ) 和管件piping and fitting 24511.1. 閥桿與閥蓋結構valve stem and bonnet designs 24511.2. 閥門(1) valves( i) 246閥門 valves( n) 248閥門(3) valves( m) 249閥門(4) valves(

32、 iv) 25011.3. 閘閥 gate valve 25111.4. 截止閥globe valve 25211.5. 球閥 ball valve 25311.6. 止回閥check valve 25411.7. 彈簧安全泄壓閥 spring safety-relief valve 25511.8. 液面控制浮球閥 pilot operated ball float valve 25611.9. 波紋管密封閘門閥 bellows sealed gate valve 25711.10. 熱膨脹閥 thermo expansion valve 25811.11. 閥門操縱機構valve oper

33、ating mechanisms 25911.12. 蒸汽疏水閥（器）和空氣疏水閥（器） steam traps and air traps 26011.13. 管道附件 pipe line fitments 26211.14. 法蘭、法蘭密封面及墊片 flanges, flange facings and gaskets 26411.15. 填料packings 26611.16. 管件pipe fitting 26711.16.1. 法蘭管件flanged fittings 26711.16.2. 螺紋管件threaded fittings 26811.16.3. 鋼焊接管件steel-w

34、elding fittings 26911.17. 塑料壓接管接頭plastics compression joints 27011.18. 預制彎管與膨脹節fabricated pipe bends and expansion joints 27111.19. 管子連接 joints in tubing and pipe 27211.20. 管道絕熱 piping insulation 27311.21. 管吊與管支架pipe hangers and pipe supports 27411.22. 急 救 沖 洗 和 洗 眼 站 safety shower and eyewashstatio

35、nhose station 軟管站27612. 量測儀表instrumentation 27712.1. 液位 （面）計 level gage 27712.1.1. 就地安裝直讀液面計locally mounted direct reading level gages27712.1.2. 浮筒式液面計displacement type level gages 27812.1.3. 液面調節器及液位開關level controllers and switches 27912.2. 壓力測量儀表pressure instruments 28012.2.1. 液體壓力計manometers 2821

36、2.2.2. 壓力測量的新成果new developments in pressure measurements28312.2.3. 壓力表的安裝installation of pressure guage 28412.3. 流量測量元件flow measuring element 28512.3.1. 速率式流量計inferential meters （fluid velocity meter） 28512.3.1.1. 渦輪流量計turbine meter 28512.3.1.2. 漩渦流量計vortex flow meter 28612.3.1.3. 漩渦流量計測量系統vortex fl

37、ow meter measurement system 28712.3.2. 一次流量元件primary flow elements 28812.3.3. 容積式流量計positive displacement type flow meters 29012.3.4. 可變面積 （定壓降）式流量計variable area type flow meters 29212.3.5. 差壓流量計的安裝installation of head meters 29412.3.6. 面積式流量計及計量泵area meters and metering pumps 29612.3.7. 其他流量計(1) ot

38、her flow meters( i) 297其他流量計(2) other flow meters( h ) 29812.4. 溫度計 thermometer 29912.4.1. 熱電偶 thermocouple 29912.4.2. 液體膨脹溫度計及雙金屬溫度計liquid expansion and bimetallicthermometer 30012.4.3. 電阻式溫度計及熱敏電阻resistance thermometer and thermistor30212.4.4. 壓力式溫度計filled system thermometer 30312.4.5. 輻射高溫計radiat

39、ion pyrometer 30412.4.6. 光學高溫計optical pyrometer 30512.4.7. 電動指示調節器electritic indicating controller 30612.4.8. 氣動指示調節器pneumatic indicating controller 30712.4.9. 多點長圖溫度記錄儀multi-point long chart temperature recorder30812.4.10. 控制操作箱control station 30912.4.11. 記錄紙 charts 31012.5. 變送器 transmitter 31112.5

40、.1. 壓力變送器pressure transmitter 31112.5.2. 差壓變送器differential pressure transmitters 31212.5.3. 氣動溫度變送器pneumatic temperature transmitter 31412.5.4. 物位變送器level transmitters 31512.6. 調節 (控制 )器 controller 31612.6.1. 液位調節器liquid level controller 31612.6.2. 氣動調節器pneumatic controller 31712.6.3. 彈簧管調節器bourdon

41、tube controller 31812.7. 調節閥 control valve 31912.7.1. 薄膜及活塞執行機構 diaphragm and piston actuators 32012.7.2. 調節閥閥蓋bonnets of control valve 32112.7.3. 調節閥閥體(1) control valve bodies ( i) 322調節閥閥體(2) control valve bodies ( h ) 32312.7.4. 閥芯及籠式閥芯valve plugs and cages 32412.7.5. 閥內組件(組成 )部分components valve

42、trim 32512.7.6. 調節閥的作用及導向 acting and guiding of control valve 32612.7.7. 調節閥定位器positioner of control valve 32712.7.8. 調節閥手動機構 handjack assembly of control valve 32812.7.9. 氣動活塞定位器pneumatic piston positioner 32912.8. 氧分析器 oxygen analysis equipment 33012.9. 二氧化碳分析器carbon dioxide analyzer 33212.10. ph

43、計 ph meters 33312.11. 粘度測量儀表viscosity measuring instruments 33412.12. 比重儀表 specific gravity instrument 33612.13. 速度測量與控制 speed measurement and control 33712.14. 儀表盤instrument panels 33812.15. 溫度控制temperature control 34012.16. 信號系統annunciators systems 34112.16.1. 集中式信號器integral annunciators 34212.16.

44、2. 分 離 式 信 號 器 及 半 模 擬 式 信 號 器 remote annunciator andsemigraphic annunciator 34312.17. 繼動器 relays 34412.18. 儀表管件及儀表箱instrumentation tube fittings and housings 34612.19. 儀表圖例符號及名稱instrumentation symbols and identifications 34812.20. 總體分散控制系統(1) total distributed control system( i) 35012.21. 總體分散系統(2)

45、 total distributed control system( h ) 35112.22. 總體分散系統(3) total distributed control system( m) 35212.23. 總體分散系統(4) total distributed control system( iv) 35312.24. 總體分散系統(5) total distributed control system( v) 35412.25. 總體分散系統(6) total distributed control system( vi) 35513. 電氣工程 electrical engineer

46、ing 35613.1. 旋轉電機 electrical rotating machine 35613.1.1. 直流電機 direct-current machine 35613.1.2. 直流發電機direct-current generator 35713.1.3. ac 換向電機 ac commutator machine 35813.1.4. 交流電動機alternating-current motor 35913.1.5. 滑環式感應電動機slip-ring type induction motor 36013.1.6. 無刷同步電動機brushless synchronous m

47、otor 36213.1.7. 同步電動機的無刷勵磁brushless excitation of synchronous motor36313.1.8. 線槽和繞組slots and windings 36413.2. 變壓器transformer 36513.2.1. 油浸式變壓器正視圖oilimmersedtransformerfront view 36513.2.2. 油浸式變壓器側視圖oilimmersedtransformerside view 36613.2.3. 油浸式變壓器外視圖oilimmersedtransformerexterior 36713.3. 整流器和電池rec

48、tifier and battery 36813.3.1. 整流器 rectifier 36813.3.2. 原電池(1) primary batteries( i) 369原電池(2) primary batteries( h) 37013.4. 高壓開關裝置high voltage switchgear 37213.4.1. 金屬封閉式開關裝置metal-enclosed switchgear 37213.4.2. 金屬高壓開關柜metal-clad high-voltagecubicle 37313.4.3. 六氟化硫斷路器sf6 circuit-breaker 37413.4.4. t

49、 型斷路器 t-breaker 37613.4.5. 電動機操縱機構motor drive 37713.5. 低壓開關 low-voltage switches 37813.5.1. 限流空氣斷器currentt-limiting air-break circuit-breaker 37813.5.2. 塑料外殼斷路器moulded case circuit-breaker 37913.5.3. 控制開關 control switches 38013.5.3.1. 按鈕開關 pushbutton switches 38213.5.3.2. 凸輪旋轉開關cam switches 38413.6.

50、 電磁設備 electromagnetic apparatus 38613.6.1. 電磁機構和器件 electromagnetic mechanism and devices 38613.6.2. 電磁繼電器electromagnetic relays 38813.6.3. 電壓調整繼電器voltage regulating relay 39013.7. 電氣防爆 electrical explosion-proof 39113.7.1. 危險場所內的電力和照明安裝 power and lighting installation inhazardous location 39113.7.2.

51、 防爆設備 explosion-proof apparatus 39213.8. 供電系統 power supply system 39413.8.1. 熱電廠 thermal power plant 39413.8.1.1. 節能發電廠energy saving power plant 39613.8.2. 變電所屋內配電裝置indoor installations of electric substation 39813.8.3. 鐵塔及電桿towers and poles 39913.8.4. 靜電除塵器electrostatic precipitator 40013.9. 內線 int

52、erior wiring 40113.9.1. 電纜 cables 40113.9.2. 熔斷器 fuses 40413.9.3. 連接器和端子connectors and terminals 40613.9.4. 燈泡 lamps 40713.9.5. 電熱器件 electroheating devices 40814. 施工設備和工具construction equipment and tool 40914.1. 起重機械 hoisting machinery 40914.1.1. 桅桿起重機，轉臂起重機derricks 40914.1.2. 安裝起重機erecting cranes 41

53、014.1.3. 起重設備 hoisting devices 41214.1.4. 起重機(1) cranes( i) 413起重機(2) cranes( h ) 414起重機(3) cranes( m) 41514.1.5. 手拉葫蘆和千斤頂chain hoists and jacks 41614.1.6. 麻繩， 鋼絲繩， 繩結和吊索hemp ropes, cable wires, knots and slingchains 41814.1.7. 起重機用的起吊附件 lifting attachments for crane use 42014.1.8. 叉式起重車的附屬配件 fork-t

54、ruck attachments 42114.2. 工具 tools 42214.2.1. 扳手wrenches 42214.2.2. 活扳手及管鉗adjustable wrenches and pipe wrenches 42314.2.3. 鉗和剪鉗 pliers and nippers 42414.2.4. 刀具的柄部、套節及套筒shanks, sockets and sleeves 42514.2.5. 絲錐 taps 42614.2.6. 絞刀reamers 42714.2.7. 麻花鉆 twist drills 42814.2.8. 木工工具 wood working tools

55、42914.2.9. 檢測規inspection gages 43014.2.10. 量具 measuring tools 43115. 焊接 welding 43215.1. 金屬焊接welding of metals 43215.2. 焊接符號welding symbols 43415.3. 保護式電弧焊原理principles of shielded arc welding 43515.4. 焊接位置、接頭形式及焊接形式welding positions, types of joints andwelding 43615.5. 坡口 grooves 43715.6. 坡口詳圖 detai

56、l of grooves 43815.7. 焊接缺陷 defects of welding 43915.8. 填角焊，角焊fillet welding 44015.9. 自動埋弧焊automatic submerged arc welding 44115.10. 氣體保護電弧焊gas-shielded arc welding 44215.11. 金屬極榨?性氣體保護焊gas metal-arc welding 44415.12. 金屬極氣體保護焊焊槍 electrode guns of gas metal-arc welding44515.13. 普通電渣焊conventional electroslag