U-GLIDER優雷特滑翔機說明書

1、U-GLIDER優雷特滑翔機說明書公司地址：二路益眾科技園A1棟4樓電 話：+86-傳 真：+86-郵 編：523785ADD: 4/F,Building A1,Yizhong Science and technology park , Jinsha Road two,ShuiKou Villiage,Dalang Town,DongGuanTel: +86- Fax: +86-        所有零件All spare partsOp

2、en the Carton開箱圖Install the steel wire放好鋼絲Glue in the card slot在凹槽打膠All OverInstall the control horn on the wings所有舵角安裝完成安裝舵角Notice: Carbon tube must be pushed to the end of plastic parts, otherwise the length is not appropriate.此處注意碳桿一定要推到最前，否則長度不合適Carbon tube and plastic parts assembly將碳管與塑膠件裝到一起壓

3、入碳桿 Glue and install the plastic slice on the wings, pay attention to the plastic slice size.裝舵機Install the ServosPush the carbon tube打膠安裝機翼塑膠片注意塑膠片一大一小平尾鋼絲插鋼絲· Notice: After the installation, please glue the rubber tube and carbon tube to assure the efficiency of the servo此處注意為了保證舵效安裝完飛機之后要將兩頭

4、膠管與碳管點膠水固定住Rudder steel wireElevator steel wire此處有孔The hole at here垂尾鋼絲Insert the steel wire碳管外露長度541mm碳管從尾部插入，注意留出長度，長度見下一張圖帶折彎的一頭one side of the curved steel wire碳管從飛機尾部插入，注意露出長度約為541mmInsert the carbon tube from the tail of the airplane, the show length should be about 541mmInsert the steel wire

5、to regulator of the elevator將鋼絲插入升降舵上的調節器內Carbon tube alignedwith the foam corner此處注意碳桿與泡沫件拐角平齊Apply glue in the back of elevator平尾反面打膠打膠并安裝垂尾Glue and install the rudder裝搖臂Install the rocker 給木片插到此處，為了維修方便不用打膠!Insert the wood chip as displayed, dont need apply glue,easy maintenance下面是飛機涂裝粘貼教程Flow ar

6、e sticker photos滑翔機配件表U-Glider Spare Parts List名稱Item Name詳情Description塑膠件Plastic parts機翼塑膠片*2/Plastic slice*2 on wings舵機固定塑膠件*2/Plastic parts*2 on servos碳管鏈接塑膠件*1/Plastic parts*1 on carbon tube舵機搖臂*3包/Rockers*3 on servos 舵機*1/Servo*1舵角、螺絲、扳手Control horn;Screw;Wrench舵角*4/Control horn*4信號線扎帶*2/Cable

7、ribbon*2小金屬調節器*5（其中一個備用）Metal regulator*5(one of them as a common spare)0.3內六角扳手*1/ 0.3 Hexagon wrench*13*30攻絲螺絲*1（固定機翼）3*30 self-tapping screw*1(fix wing)3*20攻絲螺絲*1（固定機翼）3*20 self-tapping screw*1(fix wing)碳管Carbon tube 3*3*54方管*2/3*3*54 square tube*2 3*3*68方管*2/3*3*68 square tube*2 6*6*80方管*1/6*6*80 square tube*1鋼絲Steel wire副翼鋼絲*2/Aileron steel wire*2升降鋼絲*1/Elevator steel wire*1方向鋼絲*1/Rudder steel wire*1發泡件Foam parts機翼*2/Wing*2平尾*1/Elevato