日本進口高濃度氫氣檢測氣體傳感器NC-180S-H

1、（C a t a l y t i c T y p e H y d r o g e n G a s S e n s o r ）(Single Header Type For Industrial Application深圳市深國安電子科技有限公司地址：廣東省深圳市龍華新區牛欄前大廈網址：蔣小姐：電話：1. GeneralCatalytic type gas sensor NC series were developed for industrial applications, and NC-180S-H is a single header type gas sensor for hydroge

2、n. Shape is the same as NC-180S, however the supply voltage and current is different from it. Features and typical application are as follows.2. Features and applications1 FeaturesGood stabilityExcellent repeatability and detection accuracyGood linearity against gas concentrationQuick responseDown-s

3、izing for design flexibility of gas alarm or detector2 ApplicationsFixed type gas alarm or detector for hydrogen gasHydrogen gas densitometer3. Ratings1 Supply voltage to sensor AC 1.6 +/- 0.1V(5060Hz2 Current (when 1.6V is supplied AC 135 +/- 15mA(5060HzDC 135 +/- 15mA3 Ambient temperature and humi

4、dity in operationTemperature -20 - +60 degree CHumidity Less than 95%RH(without dew condensation4 Ambient temperature and humidity in storageTemperature -30 - +70 degree CHumidity Less than 99%RH(without dew condensation5 Detection range 0 100%LEL(Except acetylene4. Specification1 Zero offset value

5、in air 0 +/- 30mV(without trimming resistor2 Minimum sensitivity 35mV/10%LEL of hydrogen3 Response time Less than 8 sec. at T90Less than 3 sec. at T504 Linearity Effectively linear to 60%LEL5 Detection accuracy +/- 1%LEL6 Span drift Less than 1%LEL/month7 Zero offset drift Less than 0.5%LEL/month8 W

6、arranty period 24 months深圳市深國安電子科技有限公司地址：廣東省深圳市龍華新區牛欄前大廈網址：蔣小姐：電話：5. Appearance and dimension Fig. 1 : Appearance and dimensions6. Measuring circuit diagramI n p u t (+ I n p u t (G N D Fig. 2 : Recommended circuit diagram (R1, 2 : 200ohm, VR1 : 3Kohm7. Gas sensitivity characteristics深圳市深國安電子科技有限公司地

7、址：廣東省深圳市龍華新區牛欄前大廈網址：蔣小姐：電話： Fig. 3 : Gas sensitivity characteristics8.Temperature dependence at 60%RH Fig. 4 : Temperature dependence of zero offset深圳市深國安電子科技有限公司地址：廣東省深圳市龍華新區牛欄前大廈網址：蔣小姐：電話： Fig. 5 : Temperature dependence of relative sensitivity to hydrogen9.Humidity dependence Fig. 6 : Humidity de

8、pendence of zero offset(at 25 degree C Fig.7 : Humidity dependence of relative sensitivity to hydrogen深圳市深國安電子科技有限公司地址：廣東省深圳市龍華新區牛欄前大廈網址：蔣小姐：電話：10. Sensitivity distribution Fig. 8 : Sensitivity distribution 11. Relative sensitivity (In case that sensitivity to hydrogen is 100. Gas/Vapor Chemical for

9、mula LEL (% Relative sensitivity Std. Hydrogen H2 4.0 100 1 Acetone (CH32CO 2.6 45 2 Ethanol C2H5OH 3.3 40 3 Ethyl acetate CH3COOC2H5 2.2 10 4 Ethylene C2H4 2.7 65 5 Methane CH4 5.0 0 6 Iso-butane C4H10 1.8 0 7 Iso-propanol CH3-C2H4OH 2.2 45 8 Methanol CH3OH 6.7 100 9 Methyl ethyl ketone CH3-CO-C2H5

10、 1.9 45 10 N-butane C4H10 1.8 0 11 N-heptane C7H16 1.05 30 12 N-hexane C6H14 1.2 10 13 N-pentane C5H12 1.4 5 14 Propane C3H8 2.1 0 15 Toluene C6H5CH3 1.2 70 16 Ammonia NH3 15.0 120 17 Carbon monoxide CO 12.5 115 18 Unleaded petrol 1.2 10 Remarks If other data are required, please contact us since se

11、nsitivity of many combustible gases except bad smell, dangerous, poisonous and high boiling temperature materials over 120 degree C are available for investigations. 深圳市深國安電子科技有限公司 地址：廣東省深圳市龍華新區牛欄前大廈 蔣小姐：電話： 網址： 12. Evaluation method 1. Test equipment Outline of test equipment is as follows. Gas Fan

12、 Ventilator Gas densitometer D.C. voltage stabilizer Voltmeter Remarks on equipments A Test chamber Material of test chamber is to be inactive like metal, glass or acrylic resin which does not exhale and adsorb gases. Volume of test chamber is to be more than 1 litter per 1pc. of sensor. B Circumsta

13、nce Clean circumstance is recommended as evaluation area. Dirty circumstance which contains combustible gases like organic solvent vapor is to be avoided. C Gas densitometer Laser gas densitometer is recommended, but volume method is available simply. D Agitation in test chamber Air agitation in tes

14、t chamber is to be conducted carefully in order not to flow air to sensor directly. Air velocity to sensor is to be less than 0.5m/sec. E Power supply Both of AC power and DC power are available for sensor, however DC power supply is recommended for accurate evaluation. F Digital volt meter Since th

15、e impedance of sensor is fairly low, general digital volt meter having over 100kohm as input impedance is sufficiently available. G Ventilation Ventilator with ventilation capacity of over 10 times/min. of the volume of test chamber is recommended for the convenient evaluation. 深圳市深國安電子科技有限公司 地址：廣東省

16、深圳市龍華新區牛欄前大廈 蔣小姐：電話： 網址： H Installation position of sensor in test chamber When the sensor is installed in test chamber, it should be careful that each sensor is to be in constant position because output signal changes in case that position of sensor changes. If the rough evaluation is carried out,

17、such careful treatment is not necessary. 2. Adjustment of gas concentration Adjustment of gas concentration is to be conducted by volume method or by using laser gas densitometer. In case of volume method, gas volume to be injected into a chamber is obtained from the calculation formula below descri

18、bed. V (ml = Vi C10 6 V Vi Tc Tr C 273 + Tr 273 + Tc : Gas volume to be injected : Volume of test chamber（ ml ） : Temperature in test chamber（） : Room temperature（） : Target gas concentration ( ppm 3. Evaluation method A. Preliminary aging Before evaluation of sensor, preliminary aging at rated voltage for over 1 hr. is recommended for accurate evaluation. B. Measurement At first, output voltage in clean air is measured. It should be confirmed that output voltage has to be stable without fluctuati