電氣專業外文文獻

1、精選優質文檔-傾情為你奉上外文文獻：Intelligent lighting control systemAbstract: Intelligent lighting control system the main aim is to save energy, smart lighting control system with a variety of "pre-set" control mode and control components, at different times on different degrees of illumination for accu

2、rate set-up and rational management of energy-saving. This automatic adjustment of the illumination means, take full advantage of the natural outdoor light, only when necessary when the lamp or light to the required brightness, use the least energy to ensure that the required illumination level, ene

3、rgy-saving effect is very clear, usually ranging from more than 30%.Keywords: Intelligent lighting control system bus-type star-shaped structure1. The advantages of the use of the intelligent lighting control system 1.1 good energy saving effectIntelligent lighting control system using the main purp

4、ose is to save energy, smart lighting control system with a variety of "pre-set" control mode and control components, at different times on different degrees of illumination for accurate set-up and rational management of energy-saving. This automatic adjustment of the illumination means, t

5、ake full advantage of the natural outdoor light, only when necessary when the lamp or light to the required brightness, use the least energy to ensure that the required illumination level, energy-saving effect is very clear, usually ranging from more than 30%. In addition, the intelligent lighting c

6、ontrol system for fluorescent lamp dimming control, etc., due to the use of a fluorescent active tunable filter electronic ballast technology and reduce the harmonic content, to improve the power factor and reduce the low-voltage reactive power loss.1.2 to extend the life span of light sourceLight s

7、ource can not only extend the life savings, but also significantly reduce the workload of lamp replacement, reducing the operating costs of lighting systems, management and maintenance becomes simple.Both the thermal radiation source, or gas discharge light source, voltage fluctuations are a major c

8、ause of light damage. Therefore, the effective suppression of the fluctuations in voltage can extend the life of light sources.Intelligent lighting control system can successfully suppress the surge voltage power grid, but also have a voltage limit and the conjugate stream functions of filtering, to

9、 avoid over-voltage and under-voltage damage to the light. The use of soft-start and soft turn-off technology, to avoid the impact of current damage to the light. Through this method, the light source to extend the life span of usually 2 to 4 times.1.3 to improve the working environment, improve eff

10、iciencyGood working environment is to improve the efficiency of a necessary condition. Good design and reasonable choice of light source, lamps and lighting quality control systems, can improve the quality of lighting.Intelligent lighting control system dimming control panel module to replace the tr

11、aditional lighting of the level switch control is an effective way to control the overall room illumination value, thereby enhancing the uniformity of illumination. At the same time, this control method used in electrical components have also solved the stroboscopic effect, will not create uncomfort

12、able, confused, feeling eyestrain.1.4 to achieve a variety of lighting effectsA wide range of lighting control, the same building can have a variety of artistic effect, for a lot of construction hyperchromic. Modern buildings, lighting is not simply to meet people on the visual effect of light and s

13、hade, they should have control of a variety of programs to make buildings more vivid, more artistic, giving a wealth of visual effects and aesthetics. As an example of a project, building the exhibition hall, lecture hall, lobby, atrium, etc., if with intelligent lighting control system, according t

14、o different times, different uses, different effects, using the corresponding pre-set scene control, can achieve the wealth of artistic effect.1.5 facilitate the management of maintenanceIntelligent lighting control system for the control of lighting based on the automaticcontrol of modular-based, s

15、upplemented by manual control, preset lighting scenes to the parameters stored in the EPROM Digital, these information is very convenient to set up and replaced, so that building lighting management and maintenance easier.1.6 have a high economic rate of returnOur reference point for the Shanghai re

16、gion, from energy-saving lights and provincial estimates of the two made a come to this conclusion: with three to five years, the owner can recover the basic intelligent lighting control system to increase the total costs.Intelligent lighting control system can improve the environment and improve em

17、ployee productivity and reduce maintenance and management costs, but also for the owners to save a substantial amount of costs.2 intelligent lighting control system componentsWe know that the intelligent lighting control system of building control system is onlyone part of the. If you want to focus

18、on the various control systems to the control center to control, then the control system must have the standard communication interface and protocol version. Although such a system integration is feasible in theory, but it is very difficult to put into practice. Thus, in engineering, intelligent man

19、agement of our building a distributed system, distributed, that is relatively independent of each control subsystem, self-contained, the implementation of specific control, intelligent building management system control subsystem of the relative independence, self-contained, the implementation of sp

20、ecific control, intelligent building management system from the control subsystem is a signal collection and monitoring role.At present, the intelligent lighting control system in accordance with sub-networktopology, the following two forms, namely, bus and star-shaped structure-based hybrid.Both fo

21、rms have the characteristics of a number of bus more flexibility, easy expansion, control of relative independence, lower costs; mixed some high reliability, fault diagnosis and rule out the simple, easy access to the agreement, transfer rate higher.Engineering design, we consider the building of in

22、telligent lighting control system as an independent subsystem, use of international standards and agreements of thecommunication interface text, into the intelligent building management systems.Intelligent lighting control system uses a distributed, distribution-based approach,that is, the dimming c

23、ontrol unit is relatively independent, self-contained,non-interfering, through centralized management and information interfaces, and intelligent building management system linked to the achievement of the building control center subsystem of the collection and monitoring of the signal. In short, th

24、e intelligent lighting control should be the main system is a centralized management, and the main trunk and information interface components consisting of the regional implementation of the same sample of control and signal networks; its subsystems should be a dimmer by the various types of modules

25、 , control panels, illumination detector dynamic and static and dynamic components consisting of detectors, respectively, of the regional implementation of the specific control of different networks, the main system and subsystems, such as between the components through the interface to connect, to

26、achieve data transmission.3 Intelligent lighting control system and control of the control of the contentA project to control the use of intelligent lighting control system include the following categories: technology office hall, computer center and other important room, lecture hall, such as multi

27、-function hall, exhibition hall, conference center, lobby and courtyard, walkways and elevators, such as the Office of Public site; building facade lighting ingeneral and also by the intelligent lighting control systems to control switch signal.Control the content of the term of the Interpretation:(

28、1) clock controlClock management, etc. through the electrical components, to achieve the normal work of regions for the state of lighting in different time control.(2) the automatic adjustment control illuminationThrough each module and illumination dimming dynamic electrical components such as dete

29、ctors, to achieve under normal conditions in the regions for the normal work of the state of the automatic lighting dimming control, making the region, such as illumination will not be outside with the sunshine factors change, and always maintain the default value in the illumination around.(3) cont

30、rol of the regional sceneThrough each dimmer module and the control panel and other electrical components, to achieve under normal conditions in the regions for the normal work of the state of the scene lighting control switch.(4) static and dynamic detection of controlThrough each dimming modules a

31、nd electrical components, such as movementdetectors, to achieve under normal conditions in the regions for the normal work of the state of the automatic lighting control switch.(5) Reduction state of emergency controlThrough each of the normal lighting control module, such as dimming of the electric

32、al components, to achieve a state of emergency for the normal work of the various districts in the state of lighting and to give up the number of relief, such as dimming control.(6) Manual remote controlThrough the infra-red remote control, to achieve under normal conditions in theregions for the no

33、rmal work of the state of lighting control and manual control of theregional scene.(7) Emergency lighting controlHere mainly refers to the control of intelligent lighting control system to the specialregion by the implementation of the emergency lighting control, including the following two controls

34、:1) under normal illumination and the automatic adjustment control of the regionalscene with the regulation of the normal work of lighting the same manner as the control.2) a state of emergency automatic discharge dimming control, through each of theemergency lighting dimming control module, such as

35、 electrical components, to achieve a state of emergency for the regions under a state of emergency lighting dimmers, such as giving up control, so that the accident in the state of emergency lighting to reach 100%.These are the characteristics of intelligent lighting control systems analysis and off

36、icebuildings in a specific application in a number of experiences, hoping to play the role of forward, so that the field of technology in the lighting to fully play its role.References1 GB 50034-2004, intelligent lighting, architectural design standards M2 Wang Na editor. Intelligent Architecture. C

37、hina Communications Press .2004.6.13 Tian Jing. intelligent lighting control system in the school application. Electrical & Intelligent Building, 2006,64 Gong South flute. China World Hotel, intelligent lighting control system. Intelligent Electrical Building Technology, 2005 Chen Yongsheng. Int

38、elligent lighting control product selection compared. Building Electrical .20026 Lijun Liang. intelligent lighting control applications. Article ID :1000-8136 (2006) 06-0014-027 Yang Mei. Intelligent Lighting Control System Application. Article ID :1671-4024 (2006) 02-47-03中文譯文：智能照明控制系統摘要：智能照明控制系統的主

39、要目的是利用“預先設定的“控制方式和控制元件對照明系統進行優化管理，智能照明控制系統在不同時期，不同程度上的照明進行精確設置和合理的節能管理。這種自動調整的照明方式，充分利用室外的自然光，只在必要時當燈或燈光亮度有特殊要求時，用最少的能源，在確保所需的照明度的前提下，達到理想的節能效果，一般可達30以上。關鍵詞：智能照明控制系統 總線型 星型結構1. 利用智能照明控制系統的優勢1.1良好的節能效果智能照明控制系統的主要目的是節約能源，智能照明是用“預先設定的“控制模式和控制元件的控制系統，在對不同時間的不同光照度進行準確的設置和合理的節能管理。這種自動調整照明方式，采取充分利用室外的自然光，只

40、在必要時當燈或光所需的亮度有要求時，用最少的能源，以確保所需的照明度，節能效果十分明顯，通常是超過30不等。此外，智能照明熒光燈調光控制燈等，由于使用熒光燈電子鎮流器有源可調諧濾波器技術，減少了諧波含量，提高了功率因數，降低了低壓無功損耗。1.2延長光源壽命照明光源不僅可以延長使用壽命，而且還大大減少更換燈泡的工作量，減少照明系統的運作成本，使得管理和維修變得簡單。無論是熱輻射光源或是氣體放電光源，電壓波動是光損傷的重要原因。因此，有效的制止波動電壓可以延長光源的壽命。智能照明控制系統可以成功地抑制電源網絡的浪涌電壓，但也有限制電壓和共軛電流濾波的功能，以避免過電壓和欠電壓損壞光源。通過使用軟

41、啟動和使用軟關斷技術，可以避免損害到光電源。通過這種方法，光源壽命通?？裳娱L為2至4倍。1.3改善工作環境，提高工作效率良好的工作環境，是提高效率的一個必要條件。良好的設計和光源，燈具和照明質量控制系統的合理選擇，可以提高照明質量。智能照明控制系統使用的調光控制面板模塊，用以取代傳統的液位開關控制照明是一種有效的方式來控制整個房間照度值，從而提高照度均勻性。同時，這種控制方法在電器元件使用，也解決了頻閃效應，也不會產生不舒服的，混亂的感覺和眼睛疲勞。1.4實現了多種燈光效果一個廣泛的照明控制，同樣的建設可以有不同的藝術效果并為建筑增色不少。現代建筑，照明不僅是為了履行對光影的視覺效果，設計師們

42、應該有多種方案的控制，使建筑物更加生動，更加美觀，給人一種視覺效果和美學的財富。作為一個工程實例，例如展廳，報告廳，大堂，中庭等，如果能利用智能照明控制系統，對不同時期，不同用途，不同的效果采用相應的預設置場景控制，就可以實現豐富的藝術效果。1.5便于維護管理智能照明控制系統的控制基礎為自動照明控制模塊，由人工控制為輔，把預置的燈光場景的參數存儲在EPROM中，這些信息可以非常方便的設置和更換，使建筑照明管理和維護更加容易。1.6具有較高的經濟回報率我們以上海地區為參考，從節能燈和省級這兩個估計作出得出這樣的結論：三至五年，業主可以恢復基本智能照明控制系統的投資，以后便可以增加收入。智能照明控制系統可改善環境和提高員工的工作生產率和降低維護和管理成本，而且還為業主節省了大量費用。2智能照明控制系統組件我們知道，樓宇控制系統只是智能照明控制系統一個部分。如果你想專注于各種控制系統，控制中心控制，則控制系統必須具有標準通訊接口和協議的版本。雖然這樣的系統集成在理論上是可行的，但它是非常難以付諸實踐。因此，在工程中，我們建立一個分布式系統，所謂分布式，即各控制子系統相對獨立的智能化，自我包含具體的控制，智能樓宇管