單片機控制二氧化碳傳感器程序

1、精選優質文檔-傾情為你奉上#include <reg52.h> /頭文件#include <intrins.h>#define uchar unsigned char /宏定義無符號字符型#define uint unsigned int /宏定義無符號整型typedef unsigned char BYTE;typedef bit BOOL; sbit ST=P30; /A/D啟動轉換信號sbit OE=P31; /數據輸出允許信號sbit EOC=P32; /A/D轉換結束信號sbit CLK=P33; /時鐘脈沖 sbit LCD_RS = P20; sbit L

2、CD_RW = P21;sbit LCD_EN = P22;uchar m;uint AD0809,i,cdisplay,ppm;uint ppmdou;/定義數據類型void delay(int ms) / 延時子程序while(ms-) for(i = 0; i< 250; i+) _nop_(); _nop_(); _nop_(); _nop_(); BOOL lcd_bz() / 測試LCD忙碌狀態BOOL result;LCD_RS = 0;LCD_RW = 1;LCD_EN = 1;_nop_();_nop_();_nop_();_nop_();result = (BOOL)

3、(P0 & 0x80);LCD_EN = 0;return result; void lcd_wcmd(BYTE cmd) / 寫入指令數據到LCDwhile(lcd_bz();LCD_RS = 0;LCD_RW = 0;LCD_EN = 0;_nop_();_nop_(); P0 = cmd;_nop_();_nop_();_nop_();_nop_();LCD_EN = 1;_nop_();_nop_();_nop_();_nop_();LCD_EN = 0; void lcd_pos(BYTE pos) /設定顯示位置lcd_wcmd(pos | 0x80);void lcd_w

4、dat(BYTE dat) /寫入字符顯示數據到LCDwhile(lcd_bz();LCD_RS = 1;LCD_RW = 0;LCD_EN = 0;P0 = dat;_nop_();_nop_();_nop_();_nop_();LCD_EN = 1;_nop_();_nop_();_nop_();_nop_();LCD_EN = 0; void lcd_init() /LCD初始化設定lcd_wcmd(0x38); /16*2顯示，5*7點陣，8位數據delay(1);lcd_wcmd(0x0c); /顯示開，關光標delay(1);lcd_wcmd(0x06); /移動光標delay(1

5、);lcd_wcmd(0x01); /清除LCD的顯示內容delay(1);void timer0( ) interrupt 1 /定時器0工作方式1TH0=(65536-2)/256; /重裝計數初值TL0=(65536-2)%256; /重裝計數初值CLK=!CLK; /取反 /* 主函數*/ void main() lcd_init(); / 初始化LCD delay(10);TMOD=0X01; /定時器中斷0CLK=0; /脈沖信號初始值為0TH0=(65536-2)/256; /定時時間高八位初值TL0=(65536-2)%256; /定時時間低八位初值EA=1; /開CPU中斷E

6、T0=1; /開T/C0中斷TR0=1;ST=0;OE=0; while(1) /無限循環ST=0;/使采集信號為低ST=1;/開始數據轉換ST=0;/停止數據轉換while(!EOC);/等待數據轉換完畢OE=1;/允許數據輸出信號m=P1; /讀取數據OE=0; /關閉數據輸出允許信號 AD0809=(uint)m; cdisplay = (uint)(AD0809*(5.00/255)*1000); if(cdisplay>1072) ppm=400; else if(1049<cdisplay)&&(cdisplay<=1072) ppmdou = (

7、500-(cdisplay-1049)*(100/(1072-1049);ppm = (uint)ppmdou; else if(1036<cdisplay)&&(cdisplay<=1049) ppmdou = (600-(cdisplay-1036)*(100/(1049-1036); /ppmdou = (500-(ppmd-1049)*(100/(1072-1049);ppm = (uint)ppmdou; else if(1023<cdisplay)&&(cdisplay<=1036) ppmdou = (700-(cdispl

8、ay-1023)*(100/(1036-1023); ppm = (uint)ppmdou; else if(1016<cdisplay)&&(cdisplay<=1023) ppmdou = (800-(cdisplay-1016)*(100/(1023-1016); ppm = (uint)ppmdou; else if(1006<cdisplay)&&(cdisplay<=1016) ppmdou = (900-(cdisplay-1006)*(100/(1016-1006); ppm = (uint)ppmdou; elseif(

9、1000<cdisplay)&&(cdisplay<=1006) ppmdou = (1000-(cdisplay-1000)*(100/(1016-1000); ppm = (uint)ppmdou; else if(966<cdisplay)&&(cdisplay<=1000) ppmdou = (2000-(cdisplay-966)*(1000/(1000-966); ppm = (uint)ppmdou; else if(947<cdisplay)&&(cdisplay<=966) /2000-300

10、0 ppmdou = (3000-(cdisplay-947)*(1000/(966-947); ppm = (uint)ppmdou; else if(924<cdisplay)&&(cdisplay<=947)/3000-4000 ppmdou = (4000-(cdisplay-924)*(1000/(947-924); ppm = (uint)ppmdou; else if(907<cdisplay)&&(cdisplay<=924)/4000-6000 ppmdou = (6000-(cdisplay-907)*(2000/(9

11、24-907); ppm = (uint)ppmdou; else if(891<cdisplay)&&(cdisplay<=907)/6000-8000 ppmdou = (8000-(cdisplay-891)*(2000/(907-891); ppm = (uint)ppmdou; else if(874<cdisplay)&&(cdisplay<=891)/8000-10000 ppmdou = (10000-(cdisplay-874)*(2000/(891-874); ppm = (uint)ppmdou; else if(0<cdisplay)&&(cdisplay<=874)/8000-10000 ppm = 10000; lcd_pos(0x81); lcd_wdat(ppm/10000+0x30); lcd_pos(0x82); lcd_wdat(ppm%10000)/1000+0x30); lcd_pos(0x83); lcd_wdat(ppm%1000)/100+0x30); lcd_pos(0x84); lcd