HAMCP54配置手冊

1、HACMP 5.4配置文檔1.軟件環境21.1 AIX 5300-0521.2 HAMCP 5.422. 硬件環境23. 系統環境23.1 /etc/hosts23.2 /.rhosts24. 配置HACMP 以下操作只需在一個節點上操作即可24.1 配置網絡拓樸24.1.1 配置Cluster Name24.1.2 配置Cluster節點24.1.3 配置HACMP網絡34.1.3.1 創建IP網絡34.1.3.2 創建串口心跳網絡34.1.3.3 創建磁盤心跳網絡34.1.4 添加網絡到Cluster34.1.4.1 創建IP通信接口34.1.4.2 創建串口通信設備44.1.4.3 創建

2、磁盤通信設備54.2 配置HACMP資源54.2.1 配置資源54.2.1.1 創建Applications Servers54.2.1.2 創建Service IP54.2.2 配置資源組64.2.2.1 創建資源組64.2.2.2 配置資源組屬性65. 校驗并同步HACMP配置76. 啟動/停止HACMP76.1 啟動HACMP（快速路徑：#smitty clstart）76.2 停止HACMP（快速路徑：#smitty clstop）87. 測試HACMP（這里僅為模擬測試）81. 軟件環境1.1 AIX 5300-051.2 HAMCP 5.42. 硬件環境P630兩臺DS4300存儲

3、一臺串口線一根 3. 系統環境3.1 /etc/hosts 127.0.0.1 loopback localhost p630a(另一節點為p630b) p630a_stb p630b_stb p630a_boot p630b_boot p630a_svc p630b_svc3.2 /.rhosts192.168.1.100 192.168.1.200 4. 配置HACMP 以下操作只需在一個節點上操作即可4.1 配置網絡拓樸 配置Cluster Name # smitty hacmp Extended Configuration Extended Topology Configuration

4、 Configure an HACMP Cluster Add/Change/Show an HACMP Cluster * Cluster Name testcluster 配置Cluster節點 # smitty hacmp Extended Configuration Extended Topology Configuration Configure HACMP Nodes Add a Node to the HACMP Cluste *NodeName NodeA Communication Path to Node p630a_boot +以同樣方法將NodeB添加到Cluster中

5、 *NodeName NodeB Communication Path to Node p630b_boot + 配置HACMP網絡.1 創建IP網絡 # smitty hacmp Extended Configuration Extended Topology Configuration Configure HACMP Networks Add a Network to the HACMP Cluster * NetworkName net_ether_01 * NetworkType ether * Netmask 255.255.255.0 +* Enable IP Address Ta

6、keover via IP Aliases Yes + IP Address Offset for Heartbeating over IP Aliases 使用同樣的方法創建net_ether_02 * Enable IP Address Takeover via IP Aliases Yes 此選項決定了HACMP的IP切換方式，但值得一提的是只有“boot”、“standby”、“service”三個IP分別為三個不同網段時必須選用IP Aliases方式。如果“boot”、“standby”其中一個與“service”為同一個網段時必須選用IP Replace，則此選項應選“NO”。.

7、2 創建串口心跳網絡 # smitty hacmp Extended Configuration Extended Topology Configuration Configure HACMP Networks Add a Network to the HACMP Cluster * NetworkName net_rs232_01* Network Type rs232 .3 創建磁盤心跳網絡 # smitty hacmpExtended Configuration Extended Topology ConfigurationConfigure HACMP Networks Add a N

8、etwork to the HACMP Cluster* Network Name net_diskhb_01* Network Type diskhb 添加網絡到Cluster.1 創建IP通信接口 # smitty hacmp Extended Configuration Extended Topology Configuration Configure HACMP Networks Configure HACMP Communication Interfaces/Devices Add Communication Interfaces/Device Add Pre-defined Com

9、munication Interfaces and Devices Communication Interfaces * IP Label/Address p630a_boot + * Network Type ether * Network Name net_ether_01 * Node Name NodeA + Network Interface 同樣方法添加另一個通信接口到”net_ether_01” * IP Label/Address p630b_boot + * Network Type ether * Network Name net_ether_01 * Node Name

10、NodeB + Network Interface 同樣方法創建另一個通信接口 * IP Label/Address p630a_ stb + * Network Type ether * Network Name net_ether_02 * Node Name NodeA + Network Interface * IP Label/Address p630b_ stb + * Network Type ether * Network Name net_ether_02 * Node Name NodeB + Network Interface .2 創建串口通信設備 # smitty h

11、acmp Extended Configuration Extended Topology Configuration Configure HACMP Networks Configure HACMP Communication Interfaces/Devices Add Communication Interfaces/Device Add Pre-defined Communication Interfaces and Devices Communication Devices * Device Name rs232_node_a * Network Type rs232 * Netwo

12、rk Name net_rs232_01 * Device Path /dev/tty0 * Node Name NodeA + 以同樣方法創建另一個串口通信設備 * Device Name rs232_node_b * Network Type rs232 * Network Name net_rs232_01 * Device Path /dev/tty0 * Node Name NodeB +.3 創建磁盤通信設備 # smitty hacmp Extended Configuration Extended Topology Configuration Configure HACMP N

13、etworks Configure HACMP Communication Interfaces/Devices Add Communication Interfaces/Device Add Pre-defined Communication Interfaces and Devices Communication Devices * Device Name diskhb_node_a * Network Type diskhb * Network Name net_diskhb_01 * Device Path /dev/hdisk1 * Node Name NodeA + 同樣方法創建另

14、一個磁盤通信設備 * Device Name diskhb_node_b * Network Type diskhb * Network Name net_diskhb_01 * Device Path /dev/hdisk1 * Node Name NodeA + 做磁盤心跳的磁盤必須將VG創建為Concurrent模式4.2 配置HACMP資源 配置資源.1 創建Applications Servers # smitty hacmp Extended Configuration Extended Resource Configuration HACMP Extended Resources

15、 Configuration Configure HACMP Applications Servers Add an Application Server * Server Name appserver * Start Script /hascript/clstart.sh* Stop Script /hascript/clstop.sh需要手動在兩個節點上建立“/hascript/clstart.sh”、“/hascript/clstop.sh”并保證其有執行權限。如果是雙機互備的話需要建立兩個App Server。方法相同。.2 創建Service IP # smitty hacmp Ex

16、tended Configuration Extended Resource Configuration HACMP Extended Resources Configuration Configure HACMP Service IP Labels/Addresses Add a Service IP Label/AddressConfigurable on Multiple Nodes * IP Label/Address p630a_svc +* Network Name net_ether_01 同樣方法配置第二個Service IP * IP Label/Address p630b_

17、svc +* Network Name net_ether_02 Network Name：“net_ether_01”、“ net_ether_02” 決定了與之對應的Service IP默認在哪個網卡上啟動。 配置資源組.1 創建資源組 # smitty hacmp Extended Configuration Extended Resource Configuration Add a Resource Group* Resource Group Name rg_node_a Participating Nodes (Default Node Priority) NodeA NodeB +

18、 Startup Policy Online On Home Node O + Fallover Policy Fallover To Next Prio + Fallback Policy Fallback To Higher Pr +如果是雙機互備的話以同樣方法建立另一個資源組 * Resource Group Name rg_node_b Participating Nodes (Default Node Priority) NodeB NodeA + “Participating Nodes”選項決定了資源組中節點的優先級，寫在前面的節點其優先級高于后面的節點。 根據實際需求決定資源組

19、的：“Startup Policy”、“Fallover Policy”、“Fallback Policy”。 Startup Policy：Online On Home Node Only： 只在主節點啟動。在 “Participating Nodes”中寫在第一位的節點啟動。Online On First Available Node：在第一個啟動的節點啟動。在“Participating Nodes”中所選擇的所有節點中最先啟動的節點上啟動。Online Using Distribution Policy：按照分布策略啟動Online On All Available Nodes：在所有

20、啟動的節點中啟動。做并發群集時選擇此項。如：Oracle RAC Fallover Policy：Fallover To Next Priority Node In The List：節點失敗時資源組遷移到下一優先級節點Fallover Using Dynamic Node Priority：節點失敗時動態選擇遷移節點Bring Offline (On Error Node Only)：將資源組下線 Fallback Policy：Fallback To Higher Priority Node In The List：節點恢復時資源組返回優先級高的節點Never Fallback：不進行資源

21、組回遷.2 配置資源組屬性 # smitty hacmp Extended Configuration Extended Resource Configuration Change/Show Resources and Attributes for a Resource Group Resource Group Name rg_node_a Participating Nodes (Default Node Priority) NodeA NodeB Startup Policy Online On Home Node O Fallover Policy Fallover To Next Pr

22、io Fallback Policy Fallback To Higher Pr Fallback Timer Policy (empty is immediate) + Service IP Labels/Addresses p630a_svc +Application Servers appserver + Volume Groups datavg+Use forced varyon of volume groups, if necessary false+Automatically Import Volume Groups ture+Filesystems (empty is ALL f

23、or VGs specified) +Filesystems Consistency Check fsck+Filesystems Recovery Method sequential+Filesystems mounted before IP configured false+Filesystems/Directories to Export +Filesystems/Directories to NFS Mount Network For NFS Mount +Tape Resources +Raw Disk PVIDs +Fast Connect Services +Communicat

24、ion Links +Primary Workload Manager Class +Secondary Workload Manager Class +如果是雙機互備以同樣方法修改另一個資源組屬性5. 校驗并同步HACMP配置 # smitty hacmp Extended Configuration Extended Verification and Synchronization * Verify, Synchronize or Both Both +* Automatically correct errors found during Interactively + verificat

25、ion? * Force synchronization if verification fails? No +* Verify changes only? No +* Logging Standard +6. 啟動/停止HACMP6.1 啟動HACMP（快速路徑：#smitty clstart） # smitty hacmp System Management (C-SPOC) Manage HACMP Services Start Cluster Services * Start now, on system restart or both now Start Cluster Services on these nodes NodeA NodeB * Manage Resource Groups Automatically BROADCAST message at startup? true Startup Cluster Inf