11.按鍵無線控制臺燈和led燈-繼電器

1、11.按鍵無線控制臺燈和LED燈-繼電GPIO硬件：PC 機 板、USB線8.1011.按鍵無線控制臺燈和LED燈-繼電GPIO硬件：PC 機 板、USB線8.1015V3.3V5V3.3V3.3V1、VCC:2、GND:3、IN:專業專注無線通訊 勇于創新追求卓越品專業專注無線通訊 勇于創新追求卓越專業專注無線通訊 勇于創新追求卓越品4. 實驗相關寄存器P9P0.5當使用繼電器時P0.5打開.CC2530第5章 zigbee11.按鍵無線控制臺燈和LEDZStack-1. 配置與相連的繼電器IOleApp.eww4. 實驗相關寄存器P9P0.5當使用繼電器時P0.5打開.CC2530第5章

2、zigbee11.按鍵無線控制臺燈和LEDZStack-1. 配置與相連的繼電器IOleApp.ewwvoidleApp_HandleKeys(8shift,8keys專業專注無線通訊 勇于創新追求卓越品entionallyunreferencedifkeys&HAL_KEY_SW_6/S1#if defined(ZDO_COORDINATOR)leApp_SendPeriodicMessage();/以廣播方式發數據/if(keys&HAL_KEY_SW_1/*The dentionallyunreferencedifkeys&HAL_KEY_SW_6/S1#if defined(ZDO_C

3、OORDINATOR)leApp_SendPeriodicMessage();/以廣播方式發數據/if(keys&HAL_KEY_SW_1/*The dissenttoGroupThiskeytogglesthisdeviceinandoutofgroupIfthisdevicedoesntbelongtogroup1,this*willnotreceivetheaps_Group_tgrp=aps_FindGroup(S if ( grp )dsenttogroupSLEAPP_FLASH_GROUP/Removefromthe SLEAPP_FLASH_GROUP/Addtotheflas

4、haps_AddGroup(, leApp_GroupvoiduingMSGPacket_t*pkt8 switch(pkt-clusterIdcasedata=if(data=/專業專注無線通訊 勇于創新追求卓越4L_LED_1,/L_LED_1,casevoid leApp_SendPeriodicMessage( void e= /全局變量用來保存Led狀態,if AF_DataRequest( leApp_Periodic_DstAddr, AF_DEFAULT_RADIUS)=afSS e= L_LED_1, L_L_LED_1,/L_LED_1,casevoid leApp_SendPeriodicMessage( void e= /全局變量用來保存Led狀態,if AF_DataRequest( leApp_Periodic_DstAddr, AF_DEFAULT_RADIUS)=afSS e= L_LED_1, L_LED_1, / Error occurred in request to 到開發板A到開發板B；作為終端設備,P0.5專業專注無線通訊 勇于創新追求卓越品亮。當協調器和終端組網成功后，按協調器S1鍵無線發數據給終端，終端收到后改變繼電器Led1全一樣。如果沒有相關設備，看看Led1亮。當協調