消防工程-第一章水滅火系統安裝

說明一、本章定額適用于工業和民用建(構)筑物設置的自動噴水滅火系統的管道、各種組件、消火栓、氣m2．設在高層建筑內的消防泵間管道與本章界線，以泵間外墻皮為界。序內一次性水壓試驗。2．鍍鋅鋼管法蘭連接定額，管件是按成品、彎頭兩端是按接短管焊法蘭考慮的，定額中包括了直管、管件、法蘭等全部安裝工序內容，但管件、法蘭及螺栓的主材數量應按設計規定另行計算。3．定額也適用于鍍鋅無縫鋼管的安裝。四、噴頭、報警裝置及水流指示器安裝定額均按管網系統試壓、沖洗合格后安裝考慮的，定額中已包括五、其它報警裝置適用于雨淋、干濕兩用及預作用報警裝置。六、溫感式水幕裝置安裝定額中已包括給水三通至噴頭、閥門間的管道、管件、閥門、噴頭等全部安裝內容。但管道的主材數量按設計管道中心長度另加損耗計算；噴頭數量按設計數量另加損耗計算。七、集熱板的安裝位置：當高架倉庫分層板上方有孔洞、縫隙時，應在噴頭上方設置集熱板。八、隔膜式氣壓水罐安裝定額中地腳螺栓是按設備帶有考慮的，定額中包括指導二次灌漿用工，但二次九、管網沖洗定額是按水沖洗考慮的，若采用水壓氣動沖洗法時，可按施工方案另行計算。定額只適用十、本章不包括以下工作內容：，各種套管的制作安裝，泵房間管道安裝及管道系統強度試驗、嚴密性試驗。2．消火栓管道、室外給水管道安裝及水箱制作安裝。4．各種儀表的安裝及帶電訊號的閥門、水流指示器、壓力開關、消防水炮的接線、校線。5．各種設備支架的制作安裝。6．管道、設備、支架、法蘭焊口除銹刷油。1．設置于管道間、管廊內的管道，其定額人工乘以系數1.3。2．主體結構為現場澆注采用鋼模施工的工程：內外澆注的定額人工乘以系數1.05，內澆外砌的定額人工程量計算規則一、管道安裝按設計管道中心長度，不扣除閥門、管件及各種組件所占長度以“延長米”計算。主材數量應按定額用量計算，管件含量見下表。鍍鋅鋼管(螺紋連接)管件含量表單位：10m公公稱直徑(mm以內)名稱0.694.132.739.3300.534.025.990.733.043.278.910.952.952.898.263.240.982.658.070.472.125.19三通頭管箍計項目管件含量0.022.294.927.23二二、鍍鋅鋼管安裝定額也適用于鍍鋅無縫鋼管，其對應關系見下表。對應關系表公稱直徑(mm)無縫鋼管外經(mm)00194045三、鍍鋅鋼管法蘭連接定額，管件是按成品、彎頭兩端是按接短管焊法蘭考慮的，定額中包括直管、管件、法蘭等全部安裝工作內容，但管件、法蘭及螺栓的主材數量應按設計規定另行計算。警裝置等報警裝置安裝執行濕式報警裝置安裝定額，其人工乘以系數1.2，其余不變。報警裝置安裝包括裝配管(除水力警鈴進水管)的安裝，水力警鈴進水管并入消防管道工程量。其中：(1)濕式報警裝置包括內容：濕式閥、蝶閥、裝配管、供水壓力表、裝置壓力表、試驗閥、泄放試驗閥、泄放試驗管、試驗管流量計、過濾器、延時器、水力警鈴、報警截止閥、漏斗、壓力開關等。(2)干濕兩用報警裝置包括內容：兩用閥、蝶閥、裝配管、加速器、加速器壓力表、供水壓力表、試驗閥、泄放試驗閥(濕式、干式)、撓性接頭、泄放試驗管、試驗管流量計、排氣閥、截止閥、漏斗、過濾器、延時器、水力警鈴、壓力開關等。(3)電動雨淋報警裝置包括內容：雨淋閥、蝶閥、裝配管、壓力表、泄放試驗閥、流量表、截止閥、注水(4)預作用報警裝置包括內容：報警閥、控制蝶閥、壓力表、流量表、截止閥、排放閥、注水閥、止回閥、泄放閥、報警試驗閥、液壓切斷閥、裝配管、供水檢驗管、氣壓開關、試壓電磁閥、空壓機、應急手動試壓器、漏斗、過濾器、水力警鈴等。六、溫感式水幕裝置安裝，按不同型號和規格以“組”為計量單位。包括給水三通至噴頭、閥門間的管道、管件、閥門、噴頭等全部內容的安裝，但給水三通至噴頭、閥門間管道的主材數量按設計管道中心長度另加損耗計算，噴頭數量按設計數量另加損耗計算。七、水流指示器、減壓孔板安裝，按不同規格均以“個”為計量單位。八、末端試水裝置按不同規格均以“組”為計量單位。九、集熱板制作安裝均以“個”為計量單位。十、室內消火栓以“套”為計量單位，包括消火栓箱、消火栓、水槍、水龍頭、水龍帶接扣、自救卷盤、掛架、消防按鈕；落地消火栓箱包括箱內手提滅火器；所帶消防按鈕的安裝另行計算。十二、室外消火栓以“套”為計量單位，安裝方式分地上式、地下式；地上式消火栓安裝包括地上式消十三、消防水泵接合器安裝，區分不同安裝方式和規格以“套”為計量單位。包括法蘭接管及彎頭安裝，接合器井內閥門、彎管底座、標牌等附件安裝，如設計要求用短管時，其本身價值可另行計算，其余不炮、智能控制水炮，以“臺”為計量單位。算。地腳螺栓是按設備帶有考慮的，定額中包括指導二次灌漿用工，但二次灌漿費用應按相應定額另行計《第八冊工業管道工程》相應定額。十九、消火栓管道、室外給水管道安裝、管道支吊架制作安裝及水箱制作安裝，執行《第十冊給排水、采暖、燃氣工程》相應定額。二十、各種消防泵、隱壓泵等的安裝及二次灌漿，執行《第一冊機械設備安裝工程》相應定額。二十一、各種儀表的安裝、帶電訊信號的閥門、水流指示器、壓力開關、消防水炮的接線、校線，執行《第六冊自動化控制裝置及儀表安裝工程》相應定額。二十二、各種設備支架的制作安裝等，執行《第三冊靜置設備與工藝金屬結構制作安裝工程》相應定二十三、管道、設備、支架、法蘭焊口除銹刷油，執行《第十一冊刷油、防腐蝕、絕熱工程》相應定二十四、系統調試執行本冊定額第五章相應定額。1.1管道安裝定額編號9-19-29-3單單項目253240位價數量合計數量合計數量合計綜合單價元191.75201.46232.64人工費元119.88124.32141.34材料費元5.757.0510.22其機械費元2.594.216.17中管理費元46.7548.4855.12利潤元16.7817.4019.79二類工工日74.001.62119.881.68124.321.91141.3414030303熱鍍鋅鋼管m(10.20)(10.20)(10.20)15020301鍍鋅鋼管接頭零件個(7.23)(8.07)(12.23)31110301棉紗頭kg6.500.0410.270.0620.400.0620.4002270131破布kg7.000.201.400.221.540.221.54材03570225鍍鋅鐵絲13#~17#kg6.000.0770.460.0770.460.0770.46料12050311機油kg9.000.0490.440.0570.510.1050.9503210211砂輪片φ400片13.500.1161.570.1451.960.2573.4731150101水m34.700.080.380.090.420.130.6102190109聚四氟乙烯生料帶寬20m0.353.5141.235.0271.767.9582.7999193111管子切斷套絲機直徑159mm臺班19.290.0941.810.1743.360.244.63機械99230123砂輪切割機φ400臺班22.370.0350.780.0380.850.0691.54定額編號9-49-59-69-7單單項目507080100位價合計數量合計數量合計數量合計綜合單價元241.18268.73313.79349.08人工費元147.26163.54191.66216.08材料費元10.2212.9914.2112.78其機械費元5.655.526.345.70中管理費元57.4363.7874.7584.27利潤元20.6222.9026.8330.25二類工工日74.001.99147.262.21163.542.59191.662.92216.0814030303熱鍍鋅鋼管m(10.20)(10.20)(10.20)(10.20)15020301鍍鋅鋼管接頭零件個(9.33)(8.91)(8.26)(5.19)31110301棉紗頭kg6.500.0820.530.1030.670.1240.810.1440.9402270131破布kg7.000.221.540.281.960.302.100.352.45材03570225鍍鋅鐵絲13#~17#kg6.000.0770.460.0770.460.0770.460.0770.46料12050311機油kg9.000.0870.780.100.900.0940.850.0730.6603210211砂輪片φ400片13.500.2433.280.3564.810.3965.350.283.7831150101水m34.700.160.750.180.850.200.940.311.4602190109聚四氟乙烯生料帶寬20m0.358.2192.889.5363.3410.5733.708.6713.0399193111管子切斷套絲機直徑159mm臺班19.290.2334.490.2124.090.2524.860.2334.49機械99230123砂輪切割機φ400臺班22.370.0521.160.0641.430.0661.480.0541.21中材料機械定額編號9-89-9單單項目150200位價數量合計數量合計綜合單價元1261.501629.64人工費元572.76735.56材料費元161.29186.84機械費元223.88317.39管理費元223.38286.87利潤元80.19102.98二類工工日74.007.74572.769.94735.5614030303熱鍍鋅鋼管m(9.81)(9.81)03410206電焊條J422φ3.2kg4.4010.78247.4416.73273.6231110301棉紗頭kg6.500.3822.480.5473.5602270131破布kg7.000.8586.010.8325.8231150301電kW·h0.893.2852.924.7254.2112060317清油kg16.000.4587.330.3525.6303570225鍍鋅鐵絲13#~17#kg6.000.0770.460.0770.4602010508石棉橡膠板低中壓δ0.8~6kg12.904.21754.403.88150.0603210206砂輪片φ100片1.503.3014.954.6636.9903210211砂輪片φ400片13.500.89812.121.06314.3511112524厚漆kg10.002.13921.391.99319.9331150101水m34.700.381.790.472.2199270913電焊條烘干箱容積60cm×50cm×75cm臺班25.490.1985.050.2666.7899190108普通車床工件直徑×工件長度(630mm×2000mm)臺班184.400.19135.220.18133.3899230123砂輪切割機φ400臺班22.370.1523.400.184.0399250304交流弧焊機容量30kVA臺班90.971.981180.212.656241.6299091925電動卷揚機(單筒慢速)牽引力50kN臺班154.650.12619.4999090503汽車式起重機提升質量5t臺班531.620.0126.3899070906載貨汽車裝載質量4t臺班453.500.0125.4499431904試壓泵壓力30MPa臺班22.910.0120.27中料機械定額編定額編號9-109-129-13單單項目20253240位價數量合計數量合計數量合計數量合計綜合單價元143.87148.19153.97175.65人工費元90.2893.9897.68105.08材料費元0.881.091.191.38機械費元4.863.313.3213.50管理費元35.2136.6538.1040.98利潤元12.6413.1613.6814.71二類工工日74.001.2290.281.2793.981.3297.681.42105.0814030303熱鍍鋅鋼管m(10.22)(10.22)(10.22)(10.22)03210209砂輪片φ200片13.000.010.130.010.1303210405尼龍砂輪片φ100×16×3片3.800.020.080.020.080.030.110.030.1103210409尼龍砂輪片φ500×25×4片12.300.010.120.010.1231150101水m34.700.080.380.080.380.090.420.130.61其它材料費元0.290.500.540.5499191705管子切斷機直徑60mm臺班16.380.010.160.010.160.010.160.010.1699192105開孔機DK6-200臺班260.140.0153.900.012.600.012.600.0513.0199132513滾(刮)機綜合臺班25.080.030.750.020.500.020.500.010.25其它機械費元0.050.050.060.08其其中料械定額編定額編號9-149-15單單項目506580位價數量合計數量合計數量合計綜合單價元184.00185.81211.83人工費元116.92116.92134.68材料費元1.763.513.86機械費元3.353.411.90管理費元45.6045.6052.53利潤元16.3716.3718.86二類工工日74.001.58116.921.58116.921.82134.6814030303熱鍍鋅鋼管m(10.22)(10.22)(10.22)03210209砂輪片φ200片13.000.010.130.010.130.010.1303210405尼龍砂輪片φ100×16×3片3.800.040.150.060.230.060.2312370305氧氣m33.300.170.560.190.6303210409尼龍砂輪片φ500×25×4片12.300.010.1212370335乙炔氣kg18.000.0591.060.0671.2131150101水m34.700.160.750.180.850.200.94其它材料費元0.610.680.7299191705管子切斷機直徑60mm臺班16.380.010.160.010.160.010.1699192105開孔機DK6-200臺班260.140.012.600.012.600.0051.3099132513滾(刮)機綜合臺班25.080.020.500.020.500.010.25其它機械費元0.090.150.19中價費費費費潤材料機械編項目綜合單人工材料機械管理利水(刮)機綜合9-179-189-199-20單單150200位價計數量合計數量合計數量合計元281.01316.34386.37449.22元172.42193.14238.28264.92元5.066.567.249.87元12.1514.2814.5634.02元67.2475.3292.93103.32元24.1427.0433.3637.09工日74.002.33172.422.61193.143.22238.283.58264.92m(10.22)(10.22)(10.22)(10.22)片13.000.010.130.010.130.010.130.020.26片3.800.080.300.100.380.120.460.200.76m33.300.240.790.361.190.401.320.561.85kg18.000.0861.550.1282.300.1432.570.2023.64m34.700.311.460.351.650.381.790.472.21元0.830.910.971.15臺班16.380.010.160.020.330.020.330.030.49臺班148.370.0649.500.07711.420.07711.420.09814.54臺班453.500.0167.26臺班531.620.0168.51臺班260.140.0051.300.0051.300.0051.300.0051.30臺班25.080.041.000.041.000.051.250.061.50元0.190.230.260.42定額編號9-219-229-23單單項目250300350位價數量合計數量合計數量合計綜合單價元544.89623.20738.35人工費元315.24360.38422.54材料費元11.8714.9718.78其機械費元50.7156.8573.08中管理費元122.94140.55164.79利潤元44.1350.4559.16二類工工日74.004.26315.244.87360.385.71422.5414030303熱鍍鋅鋼管m(10.22)(10.22)(10.22)03210209砂輪片φ200片13.000.030.390.030.390.050.6503210405尼龍砂輪片φ100×16×3片3.800.250.950.301.140.421.60材料機械水(刮)機綜合m3mm3m元元.227中單價1.2系統組件安裝項綜額目合單人工材料機械編號單位價費費費元元元元-24無吊頂15數量合計4-25有吊頂15數量合計56材料機械管理費利潤99.5%DNDNDN個m個個個片元元其中其中價費費費費潤位價檢查、切管、坡口、組對、焊法蘭、緊螺栓、臨時短管安裝拆除、報警閥滲漏試驗、整體組計量單位：組材14030313料14030315機械3定額編號定額項單工料械單工料械理人材機管利置電石棉橡膠板低中壓δ0.8~6DNDNDNDNDN×15直徑×工件長度(630mm×2000mm)套片片片mmmm個個個m個個個元元元元元元元-261427組定額編號-28-299-30公稱直徑(mm以內)單單100150200位價綜合單價元1009.171241.851495.81人工費元389.98524.66659.34材料費元384.28407.52435.73其元28.2231.6051.29中管理費元152.09204.62257.14利潤元54.6073.4592.31二類工工日74.005.27389.987.09524.668.91659.3420290105濕式報警裝置套(1.00)(1.00)(1.00)17010901平焊法蘭片(2.20)(2.20)(2.20)14030337熱鍍鋅鋼管DN80m45.562.0091.122.0091.122.0091.1203410206電焊條J422φ3.2kg4.400.5642.480.6873.021.4776.5031110301棉紗頭kg6.500.1631.060.1751.140.2231.4502270131破布kg7.000.120.840.120.840.120.84kWh.3612060317清油kg16.000.081.280.121.920.121.9202010508石棉橡膠板低中壓δ0.8~6kg12.900.6928.931.10414.241.32417.0803210206砂輪片φ100片1.500.1280.190.1880.280.3160.4703210211砂輪片φ400片13.500.496.620.5046.800.5186.9912050311機油kg9.000.1811.630.1811.630.1811.63材11112524厚漆kg10.000.404.000.565.600.686.80料0313熱鍍鋅鋼管DN15m7.122.0014.242.0014.242.0014.2414030315熱鍍鋅鋼管DN20m9.2210.0092.2010.0092.2010.0092.209熱鍍鋅鋼管DN25m13.554.0054.204.0054.204.0054.2015022305鍍鋅彎頭DN15個1.382.022.792.022.792.022.7915022306鍍鋅彎頭DN20個2.134.048.614.048.614.048.6115022307鍍鋅彎頭DN25個3.152.026.362.026.362.026.3615022312鍍鋅彎頭DN80個25.562.0251.632.0251.632.0251.6302190109聚四氟乙烯生料帶寬20m0.3517.7626.2217.7626.2217.7626.2215021917鍍鋅三通DN20×15個2.941.012.971.012.971.012.9703050201帶母螺栓kg5.463.03216.555.58330.489.02349.2731170126鋁牌個0.291.000.291.000.291.000.29其它材料費元9.9310.7511.7999270913電焊條烘干箱容積60cm×50cm×75cm臺班25.490.0150.380.0180.460.0380.9799190108普通車床工件直徑×工件長度(630mm×2000mm)臺班184.400.0213.870.0264.790.0295.35機99193111管子切斷套絲機直徑159mm臺班19.290.3616.960.3616.960.3616.96械99250304交流弧焊機容量30kVA臺班90.970.1513.650.17515.920.37934.4899230123砂輪切割機φ400臺班22.370.153.360.1553.470.1583.53中中料價費費費費潤位價組組機械定額編號定額項單工料械單工料械理人材機管利)DN5DN5DN20×15DN25×15DNDNDN20DN25個個個個個個個個個個個個個個片m元元元元元元元9-31-3229其其中材料組定額編定額編號9-33-34單單項目324050位價數量合計數量合計數量合計綜合單價人工費材料費機械費管理費利潤元元元元元元03.82二類工工日74.001.71126.542.53187.223.05225.7055270303輸出控制器ZSPD型個(1.00)(1.00)16413509溫感雨淋閥ZSFW-32A個(1.00)16050102球閥(帶鉛封)個(1.01)(1.01)(1.01)15021908鍍鋅三通DN32個6.781.016.8515021909鍍鋅三通DN40個8.601.018.6915021910鍍鋅三通DN50個13.201.0113.3315021919鍍鋅三通DN32×15個6.884.0427.8015021920鍍鋅三通DN40×15個8.535.0543.0815021921鍍鋅三通DN50×15個12.847.0790.7815022308鍍鋅彎頭DN32個5.178.0841.7715022309鍍鋅彎頭DN40個6.413.0319.4215022310鍍鋅彎頭DN50個10.073.0330.5115022323鍍鋅異徑彎頭DN32×15個5.171.015.2215022324鍍鋅異徑彎頭DN40×25個6.411.016.4715022325鍍鋅異徑彎頭DN50×40個10.121.0110.2215021308鍍鋅管箍DN32個3.361.013.3915021309鍍鋅管箍DN40個4.461.014.5015021310鍍鋅管箍DN50個6.711.016.7815021108鍍鋅活接頭DN32個10.911.0111.0215021109鍍鋅活接頭DN40個14.081.0114.2215021110鍍鋅活接頭DN50個21.691.0121.9103210211砂輪片φ400片13.500.2523.400.3154.250.4425.9712050311機油kg9.000.0930.840.1211.090.1611.4502190109聚四氟乙烯生料帶寬20m0.358.7363.069.0463.1713.5684.7502270131破布kg7.000.0930.650.1240.870.1971.3831110301棉紗頭kg6.500.332.150.442.860.6724.37其它材料費元1.871.873.3299230123砂輪切割機φ400臺班22.370.0671.500.0841.880.0952.1399193111管子切斷套絲機直徑159mm臺班19.290.2825.440.2595.000.3947.60其其中料1.2.4.1螺紋連接個個9-369-379-389-39定額編號9-369-379-389-39單單目506580100位價數量合計數量合計數量合計數量合計綜合單價元110.52144.15198.00339.72人工費元50.3262.9082.14143.56材料費元32.4846.7970.93118.13機械費元1.061.121.401.94管理費元19.6224.5332.0355.99利潤元7.048.8111.5020.10二類工工日74.000.6850.320.8562.901.1182.141.94143.5620130101水流指示器套(1.00)(1.00)(1.00)(1.00)15021112鍍鋅活接頭DN70個31.751.0132.0715021113鍍鋅活接頭DN80個49.601.0150.1015021114鍍鋅活接頭DN100個83.441.0184.2715021312鍍鋅管箍DN70個11.730.202.3515021313鍍鋅管箍DN80個16.420.203.2815021314鍍鋅管箍DN100個27.940.205.5912050311機油kg9.000.0160.140.020.180.020.180.0240.2231110301棉紗頭kg6.500.030.200.030.200.030.200.030.2003210211砂輪片φ400片13.500.0520.700.0761.030.091.220.1141.5402190109聚四氟乙烯生料帶寬20m0.351.5040.531.9120.672.240.782.8641.0015021310鍍鋅管箍DN50個6.710.201.3415021110鍍鋅活接頭DN50個21.691.0121.9131170126鋁牌個0.291.000.291.000.291.000.291.000.2915022710鍍鋅六角外絲DN50個7.301.017.3715022712鍍鋅六角外絲DN70個9.901.0110.0015022713鍍鋅六角外絲DN80個14.731.0114.8815022714鍍鋅六角外絲DN100個24.771.0125.0299193111管子切斷套絲機直徑159mm臺班19.290.0420.810.0420.810.0541.040.0771.4999230123砂輪切割機φ400臺班22.370.0110.250.0140.310.0160.360.020.45中材料機中材料機械價費費費費潤位價個個定額編號定額項單工料械單工料械理人材機管利電石棉橡膠板低中壓δ0.8~6直徑×工件長度(630mm×2000mm)套片片片個元元元元元元9-402769-41其其中料機械個定額編定額編號單單100150200位價綜合單價元183.00261.99367.80人工費元84.36119.14157.62材料費元35.81