園區網絡安全實驗報告new

1、園區網絡安全實驗報告一根據企業網絡拓?fù)浣Y(jié)構圖完成網絡基礎配置和安全配置，要求如下：1. PC0能夠通過PING和HTTP訪問Server0；2PC1不能PING通Server0，但是能夠訪問Server0上的WEB服務；3. 根據拓?fù)浣Y(jié)構圖完成網絡地址規劃表。二 企業網絡拓?fù)浣Y(jié)構圖三網絡地址規劃表設備名稱IP地址子網掩碼默認網關PC054PC154Router0Fa0/052S1/025

2、52Router1Fa0/054S1/052四配置文件1、ROUTER0的配置：RouterenRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int fa0/0Router(config-if)#ip add 52Router(config-if)#no sh%LINK-5-CHANGED: In

3、terface FastEthernet0/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#int se1/0Router(config-if)#ip add 52Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial1/0, changed state to downexitRouter(

4、config)#ip rout Router(config)#access-list 100 deny icmp Router(config)#access-list 100 permit tcp any anyRouter(config)#int se1/0Router(config-if)#ip access-group 100 inRouter(config)#no access-list 100Router(config)#access

5、-list 100 deny icmp host host Router(config)#access-list 100 permit tcp any anyRouter(config)#access-list 100 permit icmp any anyRouter(config)#2、ROUTER1的配置：RouterenRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int se1/0Router(config

6、-if)#ip add 52Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial1/0, changed state to upRouter(config-if)#int fa%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up0/0Router(config-if)#int fa0/0Router(config-if)#ip add 54 255.255.25

7、5.0Router(config-if)#no sh%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#exitRouter(config)#ip rout Router#config tEnter configuration commands, o

8、ne per line. End with CNTL/Z.Router(config)#ip rout Router(config)#五結果測試（可截圖說明）從PC0機ping 是通的：從PC1機ping 是通的：在router0上給PC1機配置好擴展ACL后 ping 不通了，但可以訪問Server0 TCP服務在router0上配置好所有PC機擴展ACL后PC0即能ping通Server0也能用TCP方式訪問；PC1機還是只能訪問TCP不能ping通Server0.六實驗結果分析與總結今天邱教授對園區網絡安全知識的講解，實例操作后，小組成功完成了根據拓?fù)鋱D架設路由網絡模擬實驗，對ROUTER0和ROUTER1進行網絡安全的擴展ACL配置。 分析：1、在模擬實驗之前要規劃好整個網絡IP地址，畫好拓?fù)鋱D