李寧服裝材料檢測送樣要求

1、李寧服裝材料檢測送樣要求1, 送檢面料及印花時必須填寫：面料廠、服裝廠、面料編號、面料名稱、服裝款號或產品 季節、成分等。for fabric and printing, filling in "material vendor, garment factory, fabric/printing no., material, garment style no. and season, fiber composition etc.h is necessary2, 送檢時必須提供紙板自檢報告（附樣品中）及電子版報告給實驗室。attached with self test report bo

2、th in paper and email is necessaiy3, 研發送檢時必須按服裝小類和功能性需做相應全項檢測（須測項目請打勾）。for r&d sample, must select test item according to garment1 sort and function.4, 針織類如果縮水不合格必需與克重同時復檢（須測項目請打勾），起球不合格必需與克重、 頂破強力同時復檢（須測項目請打勾）。for knit type of materials, if shrinkage fails the material must be retested for shri

3、nkage and weight （put a check mark in the box besides the testing item）. if pilling fails, the material must be retested for its pilling, weight and bursting strength（put check in the box beside testing item）.5, 認可實驗室工廠也需依照此原則執行復檢。the principle is also applied to the certified factory lab.6, 面料全項目檢測

4、必須提供3米以上。for all test item, more than 3 meters fabric is necessary.7, 各檢測項目需要的而料數量如下，（單項目的送檢樣品必須離開布邊10cm以上,并注明正反面及經緯向）：quantity of fabric for each test item as below （for the single test item, pls mark face/back and warp/weft, and the sample must be at lest 10cm deviated from the edge of fabric）.各項目

5、送樣要求/sampling requirement:耐皂洗色牢度:>15cm*15cm（ep花片:2片）color fastness to washing:>15cm*15cm（printing 2pcs）耐摩擦色牢度:>30cm*30cm（ep花片:2片）color fastness rubbing:>30cm*30cm（printing 2pcs）耐水色牢度:>15cm*15cm（ep花片:2片）color fastness to water:>15cm*15cm（printing 2pcs）耐汗?jié)n色牢度:>15cm*15cm（ep花片:4片）co

6、lor fastness to perspiration:>15cm*15cm（printing 4pcs）互染色牢度:每色>15cm*15cmcolour fastness to cross staining for every colour:>15cm*15cm耐光色牢度:>20cm*20cmcolour fastness to light:>20cm*20cm耐光汗色牢度:>20cm*20cmcolour fastness to light-perspiration:>20cm*20cm色遷移:面料色遷移>30cm*30cm,印花色遷移&g

7、t;4片，或成品一件dye transfer:>30cm*30cm for fabric, 4pcs for printing or one garment縮水率:整幅寬*直向80米shrinkage: full width *80cm in length撕破強力:>50cm*50cmtearing strength:>50cm*50cm紙裂:>80crrf 80cm（或 3 件/條）seam slippage:>80cm*80cm（or 3 garments）褲后襠接縫強力：3件/條seam slippage at back raise:> 3 garme

8、nts密度:>30cm*30cmthreads per unit length:>30cm*30cm克重:>80cm*80cmmass per unit area:>80cm*80cm頂破強力:>50cm*50cmbursting:>50cm*50cm印花片耐寒（防凍）:>2片cool resistant for printing:>2pcsph值:>5克或3（t30cm（印花片:印花部位取5克樣品） ph value:>5g or 30*30cm（printed fabric: 5g of printing）甲醛:>5克或30*30cm（印花片:印花部位取5克樣品）formaldehyde:>5g or 30*30cm（printed fabric: 5g of printing）偶氮:>50cm*>50cmazo dyestuff:>50cm*>50cm起球:50cm*50cmfuzzing and pilling:>50cm*50cm鉤絲:>80cm*80cm snagging:>80cm*80cm成份:>10 克或 30cm*30