旋回破碎機設計4頁

1、西安工業大學本科生畢業設計（論文） 第IV頁旋回破碎機設計摘 要 隨著社會的前進，原材料消耗不斷增加，導致富礦資源日益枯竭，礦石品位日趨貧化。以我國冶金礦山為例，鐵礦石平均品位31%,錳礦石品位22%。絕大多數的原礦需要破磨和選礦處理后才能成為爐料。旋回破碎機生產效率高，排料粒度小而均勻，可將礦巖從350mm破碎到l0mm以下的不同級別顆粒，可以滿足入磨粒度需要，成為金屬礦山選礦廠的主要破碎設備。 20世紀50年代初期，國內在仿原蘇聯的彈簧破碎機的基礎上，開發了國內自己的破碎機。這種破碎機的設計思想最基本點是靠排料口大小控制產品粒度，破碎物料的方法是靠動錐單向擠壓和彎曲研磨作用破碎物料，物料之

2、間相互作用很弱，破碎過程幾乎沒有選擇性。 近來國內外開發的新型高效旋回破碎機破碎物料應用的范圍不斷擴大，破碎產品粒度小，破碎效果顯著。目前旋回破碎機正向著大型、高效、可靠、節能、降耗和自動化方向發展。關鍵詞：礦山，破碎，旋回破碎機Abstract As society advances, the increasing consumption of raw materials, leading to the depletion of high-grade ore resources growing, increasingly depleted ore grade. China Metallurg

3、ical to mine, for example, the average grade of 31% of iron ore, manganese ore 22%. The vast majority of undressed ore broken grinding and milling needs to be dealt with after the furnace charge. Circular cone Breakers production efficiency, small size and homogeneous Pai expected to be broken mine

4、rock from 350mm to the different levels of particles lOmm, meet the skills needs of granularity,so Circular cone Breakers became the major equipment of Metal mines plants. 20th century the early 1950s, on the basis of the spring-loaded Breakers of former Soviet Union,developed its own domestic Break

5、ers.The most basic design concepts of this Breakers is control products granularity by the size of the mouth. Broken material way is by moving cone winding equipment and one-way squeeze role broken materials, weak interaction between materials, Broken process virtually no selectivity.And the recent

6、development of new highly efficient circular cone Breakers broken expanding the scope of application of materials, broken products granularity small, broken remarkable results. Currently circular cone Breakers is toward large, efficient, reliable, energy conservation, consumption and automation dire

7、ction.Key words: mine,break,cone breakers目錄1 緒論1 1.1引言1 1.2物料破碎的意義與破碎流程2 1.3對破碎機的要求3 1.4破碎機發展概況42 總體設計方案5 2.1旋回破碎機的類型5 2.2旋回破碎機的工作原理5 2.3簡述各部分結構及功用63 旋回破碎機的結構參數和工作參數的選擇與計算10 3.1結構參數10 3.1.1給礦口寬度與排礦口寬度10 3.1.2嚙角10 3.1.3破碎機的擺動行程11 3.1.4平行碎礦區l12 3.2工作參數12 3.2.1破碎錐的擺動次數12 3.2.2生產率13 3.2.3電動機功率14 3.3旋回破碎機的運動學15 3.4旋回破碎機的動力學18 3.5偏心部分的運動狀態254電動機的選擇及軸的計算28 4.1主電動機的選擇及傳動比的分配28 4.1.1電動機的選擇28 4.1.2傳動比的分配28 4.2傳動裝置的運動和動力參數的選擇和計算28 4.3傳動零