船舶材料驗證試驗報告范本

1、船舶材料驗證試驗報告Verification Test Report of Shipping Material報告編號：JX20101-2發送日期：2010年1月10日產品名稱：JXM402埋弧焊絲 驗證主管部門：“ABS”美國船級社 產品生產企業：宜興金興焊接材料有限公司Report number: JX20101-1Delivery date: Jan. 10th, 2010Product name: JXM402 submerged arc welding wiresCompetent department of verification: “ABS”American Bureau of

2、 ShippingProduct Manufacturing Enterprise：Yixing Jinxing Welding Material Co.,Ltd.宜興金興焊接材料有限公司Yixing Jinxing Welding Material Co., Ltd.船舶焊接材料驗證試驗報告Verification Test Report of Welding Material for Shipping(一)、材料名稱：埋弧焊絲（二）、牌號H08MnA 工廠牌號 JXM-402（三）、試品規格5.0mm 批號：090585（四）生產企業：宜興金興焊接材料有限公司（五）、認可級別：3M級1.

3、name of material: submerged arc welding wires2. product grade H08MnA factory grade JXM-4023. sample size 5.0mm lot No.：0905854. Manufacturer: Yixing Jinxing Welding Material Co., Ltd.5. recognition level: class 3M（六）試驗內容：6. content of the test序號No.試驗項目Test item引用標準Referenced standard1自動焊熔敷金屬力學性能試驗Me

4、chanical property testing of deposited metal of automatic weldingGB/T8110-2008 AWS.A.5.182自動焊對接接頭力學性能試驗Mechanical property test of butt joint of automatic weldingGB/T8110-2008 AWS.A.5.183焊絲及熔敷金屬化學成份分析Chemical composition analysis testing of welding wires and deposited metalGB/T14957-944焊絲鍍銅層厚度及表面質量檢

5、查Inspection of copper-plating thickness and surface quality of welding wiresGB/T14957-94(七)試驗結果分析：1、焊接試板編號及探傷結果見表（一）7. testing result analysis:1. the number of testing plates and the result of flaw detection see table 1 表（一）table 1編號No.牌號及材質Grade&material焊絲直徑Diameter of welding wire試板焊接方式Welding

6、 type of sample 合格標準acceptance criteria測試結果Test resultJXM09-11MJXM-4025.0mm熔敷金屬Deposited metalGB/T3323-87級GB/T3323-87Class 合格QualifiedJXM09-12MH08MnA5.0mm平對接Downhand joint合格Qualified2、焊接及熔敷化學成份見表（二）2. Chemical composition of welding and deposition see table 2表（二） Table 2名稱Name CSSiPMnCu備注Note 焊絲Weld

7、ing wires0.070.0120.030.0160.960.15標準要求standards0.100.0300.070.0300.80-1.100.20熔敷金屬Deposited metal0.070.0120.430.0181.480.10由表可知化學成份符合GB223.1-223.70及AWS.A.5.18標準This table show that the chemical composition meet standards GB223.1-223.70 and AWS.A.5.183、熔敷金屬力學性能試驗結果見表（三）3.Testing result of mechanical

8、 property of deposited metal see table 3表（三）Table 3試件編號Sample No.屈服強度Yield strengthMPa抗拉強度Tensile strengthMPa伸長率%elongation%夏比V型缺口沖擊試驗（-20）JSharpy V-notch impact test (-20) J平均值A(chǔ)verage JXM09-11M44559528140、120、150136標準要求Standards 305400-5602234由表（三）可知熔敷金屬力學性能符合GB2552及AWS.A.5.18標準。table 3 shows that

9、mechanical property of deposited metal meet standards GB2552 and AWS.A.5.18.4、對接接頭力學性能試驗結果見表（四）4. Testing result of mechanical property of butt joint see table 4表（四） Table 4編號No.抗拉強度Tensile strengthMPa冷彎：32、120°Cold bending: 32, 120°夏比V型缺口沖擊試驗（-20）JSharpy V-notch impact test（-20）J平均值A(chǔ)verag

10、e 正彎Positively bending反彎Reverse bendingJXM09-12M505合格qualified合格qualified137、140、141139標準要求Standards 400受拉面上出現的裂紋或其它缺陷長度不得大于3 mmThe length of cracks or other defects on the surface of tension face should be not more than 3 mm34由表（四）可知熔敷金屬(貌似應該是對接接頭)力學性能符合GB2650及AWS.A.5.18標準。Table 4 shows that mechan

11、ical property of butt welding joint meet standards GB2650 and AWS.A.5.18.5、焊絲銅層厚度及表面質量見表（五）Copper-plating thickness and surface quality of welding wires see table 5表（五） Table 5焊絲批號Wire lot No.鍍層厚度Plating thickness色澤Colour and lustre線徑Diameter 排列Placement 備注Note 090585003 mm表面光滑色澤一致Smooth surface and

12、 same colour4.95mm整齊規范頭尾清析Neat and clear head & tail由表(五)可見焊絲外觀質量符合GB/T14957-94標準。Table 5 shows that the presentation quality of welding wires meet standards GB/T14957-94.驗證試驗結論：宜興金興焊接材料有限公司生產“JXM”埋弧焊絲按照美國AWS.A.5.18及國標GB/T8110-2008的3M級驗證結論如下：1、 自動焊熔敷金屬及對接接頭力學性能符合3M級規范要求。2、 焊絲化學成份及表面質量符合GB/T14957

13、-94要求。Conclusion of verification test:“JXM” submerged arc welding wires produced by Yixing Jinxing Welding Material Co., Ltd. are tested according to the requirements of AWS.A5.18(American) and 3M class of GB/T8110-2008, the conclusions are as follow:1. Mechanical property of butt welding joint and deposited metal of automatic welding meet the requirements of 3M class.2. Chemical