基于PLC的液體攪拌機控制電氣設計

1、學號自理工學院畢業論文題目：基于PLC的液體攪拌機限制電器設計作 者：南小飛屆別：2021屆院 別： 機械工程學院 專業: 機械電子工程指導老師：張振職稱：講師完成時間：2021年5月5號基于PLC的液體攪拌機限制電氣設計 摘要伴隨著PLC單片機等許多處理器的開展,傳統限制模式的電機的數量已經越來越 少了,而自動限制模式的電動機的數量那么越來越多.這是由于傳統的限制方式技術手段 落后、生產效率低等弊端已不能適應企業生產的需要,本文主要是介紹使用西門子 S7-200實現對液體攪拌系統進行的自動限制.基于PLC為限制核心構成的用于兩種液體 自動進料、自動攪拌和自動放料系統

2、的限制目標、硬件組成、軟件設計及系統功能,能 模擬顯示液體攪拌系統工作的全部過程.系統硬件主要由S7-200可編程限制器、電磁閥、電動機以及液位傳感器器等組成, 編程軟件采用西門子編程軟件 STEP7-MICRO/WIN系統通過液位傳感器將采集到的現場 液位高度傳送給西門子PLC并由PLC對現場數據邏輯處理后,發出相應的限制指令, 完成系統的自動限制.最后,系統使用接口與上位機相連實現PLC與計算機的通訊.系統不僅自動化程度高,靈活性強,而且還具有在線修改功能,可以滿足不同生產工藝的 要求.關鍵字：PLC液體攪拌系統,液位傳感器,電磁閥DESIGN OF ELECTRICAL CONTROL

3、LIQUID MIXERBASED ON PLCABSTRACTWith the development of PLC and single-chip and many computer processer, the number of traditional control mode of the motor has less and less, and the number of automatic control mode of the motor is more and more. Because traditional control mode disadvantages, low

4、production efficiency, backward technology can not adapt to the needs of enterprise production, this paper mainly introduces using Siemens S7-200 implementation of liquid mixing system automatic control,Based on PLC as the control core,which is used in the form of two kinds of liquid automatic feede

5、r, automatic feeding and automatic mixing system control target, hardware composition, software design and system function, the simulation shows that the fluid mixing system of all process.The system hardware is mainly composed of S7-200 programmable controller, electromagnetic valve,and other compo

6、nents of the motor and the liquid level sensor, programming software adopts Siemens STEP7 programming software -MICRO/WIN. System by the level of liquid level sensor will be collected to Siemens PLC,and after processing by PLC to field data logic, a corresponding control instruction, complete the automatic control system. Finally, system are connected to the PLC using the interface realization of PLC and computer communications. System is not only a high degree of automatic, flexibility,but also has the function of on-line modification,can meet the requirements of dif