技術開發合同協議書范本中英文對照

1、編號:NO:技術開發合同書Technology Development Contract甲方：Part A:乙 方：Part B:簽訂日期：年 M 日DATE:/Entrusting Party (Party A):委托方(甲方)：Address:地址：Tel:Fax:Entrusted Party (Party B):受托方(乙方)：Address:地址：Tel: Fax:Party A entrust Party B to research and develop Technique Proposal Of Smart T/R Verification System. Party B wi

2、ll develop key circuits verification for the Solutionand will be in charge of general thought plan. The following articles are reached and abided by the both parties.甲方委托乙方設計智能收發驗證系統技術方案,乙方將設計開發方案的驗證電路及負責整體思路的建立,為此訂立以下協議,并由雙方共同恪守.Article 1 Definitions第一條定義1.1 Technique Proposal Of Smart T/R Verifica

3、tion System (hereinafter referred to as“the Solution ) shall mean all the required techniques to construct the general idea which will commit the attached technical requirements. The Solution shall include alltechnical details of all designing schemes and experimental verification for key circuits.智

4、能收發驗證系統技術方案(以下簡稱“方案),是指設計滿足附件要求的總體技術方案,所需要的解決方案.該解決方案包括全部設計方案資料及關鍵電路驗證技術資料.1.2 Technical documentations shall mean all the necessary documents to design theSolution and all the verification documents that Party B will use in designing the Solution.技術資料,指研發解決方案所必需的資料,包含乙方在設計方案的過程中,所使用的全部有關驗證技術資料.1.3

5、R&D shall mean research and development.“R&D ,是指研究和開發.1.4 T/R shall mean transmit and receive.“T/R,是指發射和接收.1.5 Sod shall mean system on chip.“SOC,是指系統級芯片.1.6 ASIC shall mean application specific integrated circuit. ASIC ,專用集成電路.Article 2 Contents & scopes of contract第二條合同內容和范圍2.1 The requirements of

6、 the contract Solution合同技術方案要求2.1.1 Technical Content 技術內容:(1)Design technical proposal;設計技術方案；(2)Key circuits verification;驗證關鍵電路；(3)Detailed technical requirements see technique attachment.詳細技術要求見技術協議附件.2.1.2 Technical Method and Strategy技術方法和路線：Should adopt SOC and ASIC technology;采用SOC和ASIC技術；(2

7、) Should adopt the smart T/R system to verify the key circuits.采用智能收發組件系統對關鍵電路進行實驗驗證.2.2 The obligations of both parties雙方義務2.2.1 Party B shall submit the R&Dplan to Party A within two months after this contract comes into effect.乙方應在本合同生效后2個月內向甲方提交研究開發方案.2.2.2 Party B shall accomplish the Solution

8、design work according to the followingschedule :乙方應按以下進度完成方案設計工作：(1)Phase one 第一階段：1) Initialization phase: select foundary, obtain design documents, analyze process files, establish computer system, rent and purchase EDA software, primary communicate designthought of verification circuits and gener

9、al Solution;啟動階段：晶圓廠的選定、設計文件的獲得、工藝文件的分析、計算機系統的建立、EDA軟件的租用及購置、驗證電路與整體方案設計思路的初步溝通；2)Design phase: module division of chip, principle design, computer simulation, layout design;設計階段：芯片的模塊劃分、原理設計、計算機仿真、幅員設計；3)Test phase: primary test and consecutive test.測試階段：初測及繼續測試.(2)Phase two: Alter the Solution acc

10、ording to the first phase results, and start second run.第二階段：根據第一階段測試結果對方案進行修改,同時配合總體設計進行修改.2.2.3 With the both parties confirmation and on the request of Party A, Party B shallprovide technical guidance and training to the personnel designated by Party A or providethe technical service related in t

11、he fulfillmentSolution after the Solution is qualifiedby the verification circuits.雙方確定,乙方應在合同方案的關鍵電路驗證合格后,根據甲方的請求,為甲方指定的人員提供技術指導和培訓,或提供與完成方案相關的技術效勞.2.2.4 With the confirmation of the both parties, within the validity of the Contract,Party A shall designate as Party A s projec t contact person. Part

12、y B shall appointas Party B s project contact person. If any changes of the contact person occur, oneparty shall inform the other party based on written materials in due time. If one party fails to promptly inform the other party, it shall be held responsible for any influence or damage caused by th

13、e untimely notification during the performance of the Contract.雙方確定,在本合同有效期內,甲方指定 為甲方工程聯系人,乙方指定為乙方工程聯系人,一方變更工程聯系人的,應當及時以書面形式通知另一方.未及時通知并影響本合同履行或造成損失的,應承擔相應的責任.2.3 Delivery 交付Party B shall deliver the contract Solution to party A in accordance with the contentsas specified in item 2.2.2 of the contra

14、ct.乙方應按本合同條款2.2.2規定的內容,將合同方案技術資料交付甲方.2.4 Assessment & Acceptance合同方案的驗收Confirmed by the both parties, Party A shall adopt the signed standards and methods toexamine and accept the contract Solution by Party B.雙方確定,按所簽訂的驗收標準對乙方完成的合同方案技術進行驗收.2.4.1 To ensure that the contract Solution supplied by party

15、 B is correct, reliableand advanced , Party A,B shall jointly perform the assessment and acceptance of thetechnical Solution and core circuit in accordance with the provisions of items 2.1-2.3of the contract and technique attachment. if the technical Solution are qualified, both parties shall jointl

16、y sign a certificate of acceptance in two copies , one for each party. 為了保證乙方提供合同方案的正確性、可靠性和先進性,由甲乙雙方技術人員一起,按本合同,考核驗收合格2.1 -2.3及技術協議附件規定,共同對技術方案設計和核心電路進行考核和驗收 后,雙方代表要簽署驗收合格證書一式兩份,雙方各執一份為憑.2.2 .2 If the Solution cannot meet the requirements of the contract, both parties shallhold friendly discussions

17、 to analyze the reasons and take measures to correct any defectand prepare for the second assessment and acceptance of the contract Solution. If theSolution are still not qualified after the second assessment and acceptance and theresponsibility lies in Party B ,Party B shall be responsible for all

18、the losses thuscaused, Party A shall have the right to terminate the contract and raise a claim againstParty B according to Article 6； if the responsibility lies in Party A, both partiesshall mutually discuss the further implementations of the contract.如果考核驗收達不到本合同的規定要求,那么雙方要友好協商,共同研究分析原因,采取舉措,消除缺陷,

19、進行第二次的考核和驗收.假設經過第二次考核仍不合格,如屬乙方責任,那么乙方應承擔由此而造成一切損失,甲方有權終止合同并按第6條的規定由甲方向乙方索賠,如屬甲方責任,那么雙方應共同協商本合同的進一步執行問題.2.5 Contract technical Solution results and related intellectual property ownership合同技術方案研發成果及相關知識產權的歸屬Confirmed by the both parties, the technical Solution results and related intellectual propert

20、y right generated from the Contract shall be settled by the following methods.雙方確定,因履行本合同所產生的研究開發成果及其相關知識產權權利歸屬,按以下式處理：2.5.1 Party A has the right to apply for the patents. The use and the relevant allocation of benefits after obtaining the patent right are as following: Party A will ownthe patent r

21、ight and benefits .甲方享有申請專利的權利.專利權取得后的使用和有關利益分配方式如下：專利權為甲方所有, 利益歸甲方所有.2.5.2 The profit caused from the use and transfer of the ownership of patent right shall be dealt by the following ways: 有關使用和轉讓的權利歸屬及由此產生的利益按以下約定處理：(1) The right to use technical secret: Owned by party A;技術秘密的使用權：歸甲方所有；(2) The ri

22、ght to transfer technical secret: Owned by party A;技術秘密的轉讓權：歸甲方所有；(3) The method to allocated the relevant benefits: Owned by party A;相關利益的分配方法：歸甲方所有.2.5.3 The owner of the physical fixed property which were bought by Party B rights of equipments, instruments procured with the funds of research and

23、development is Party B o乙方利用研究開發經費所購置與研究開發工作有關的設備、儀器等實物固定財產,歸乙方所有.2.5.4 With the both parties confirmation, Party A has the right to utilize the research and development achievements provided by Party B in accordance with the stipulationinthe Contract to make follow-up improvement. Thereby the new t

24、echnologic achievements with the feature of substantial or creative technology progress and its right adscription shall be shared by Party A . The detailed allocation of the related benefits shall be as follows: Owned by party A .雙方確定,甲方有權利用乙方根據本合同約定提供的研究開發成果,進行后續改進.由此產生的具有實質性或創造性技術進步特征的新的技術成果及其權屬,由

25、甲方享有.具體相關利益的分配辦如下：歸甲方所有.2.5.5 After the accomplishment of the R&Dworks stipulated in the Contract, Party B has the right to take use of the research and development achievements to make follow-up improvement. Thereby the new technologic achievements with the feature of substantial or creative techno

26、logy progress shall be owned by Party B. The detailed allocation of the related benefits shall be as follows: Owned by Party B.乙方有權在完本錢合同約定的研究開發工作后,利用該項研究開發成果進行后續改進.由此產生的具有實質性或創造性技術進步特征的新的技術成果,歸乙方所有.具體相關利益的分配方法如下：歸乙方所有.Article 3 Contract price第三條合同價格3.1 According to the contract contents and scopes

27、as specified in Article 2, the total price of the contract Solution provided by Party B including the designs, drawings, technical service and training shall amount to.按第二條所規定的合同內容和范圍,乙方所提供的合同方案包括設計方案、設計圖紙、技術效勞和技術培訓等的全部資料總價格為 美元.3.2 The above contract price is fixed and shall include the expenses of

28、 all the technical documentation specified in Article 2 of the contract. Such contract price shall also include the expenses for party B to carry out the other contract obligations of this contract.上述合同的價格為固定價格,包括本合同第二條所規定的全部技術資料.該價格包括乙方在本合同中所承擔的其他義務的全部費用在內.3.3 All the calculations and payment of ex

29、penses of this contract shall be in US dollars.本合同內的一切費用均以美元計算和結算.Article 4 Payment & Payment conditions第四條 支付與支付條件4.1 Initialization expenses after contract signing: Party A shall pay eighty thousanddollars to Party B;合同簽訂后啟動費用：甲方支付乙方 萬美元；4.2 After the whole primary Solution provided by Party B is

30、qualified, Party A shall pay one hundred and twenty thousand dollars to Party B;乙方整個初步方案通過后,甲方支付乙方 萬美元；4.3 After selecting foundary , Party A shall pay one hundred and fifty thousand dollarsto Party B;選定晶圓廠后,甲方支付乙方 萬美元；4.4 After providing the design Solution and simulated results, Party A shall pay

31、threehundred thousand dollars to Party B;提供設計方案及模擬結果后,甲方支付乙方 萬美元；4.5 After providing verification circuits and qualified, Party A shall pay eight hundred and seventy thousand dollars to Party B.測試電路提供后并驗證了電路后,甲方支付乙方 萬美元.Article 5 Infringements and Confidentiality第五條侵權和保密5.1 Party B guarantees that t

32、he Solution supplied by each party without any interference or charge from any third party. In case of any interference or charge from a third party, they shall be handled by each party and the third party. the responsibility and loss, either legally or economically, shall be borne by party B.乙方保證所提

33、供的總體方案不受任何第三者干預和指控.如果發生第三者干預和指控,那么由乙方負責同第三者進行交涉,并由其承擔法律上和經濟上的全部責任和損失.5.2 After termination of the contract term, Party A shall still have the right to usethe Solution and technical documentations to manufacture relevant products.在本合同終止后,甲方仍有權繼續使用乙方提供的技術方案和全部技術文件進行相應產品的生 產.Article 6 Guarantees and Cl

34、aims第六條保證和索賠6.1 With the both parties confirmation, either party breaches the Contract and thereby causes a standstill, delay or failure in research and development work, the responsible Party shall undertake the responsibility according to the following stipulations雙方確定：任何一方違反本合同約定,造成研究開發工作停滯、延誤或失敗

35、的,按以下約定承擔 違約責任(1)If Party A breaches Article 4 in the Contract, the responsible party shall pay pursuantto the amount of ten percent (10%) of the contract price (methods for computing the amount of breach of contract damages and the compensation for losses.甲 方違反本合同第 4條約定,應當按合同總額的10%賠償支付支付違約金或損失賠償額的計

36、算方法.(2)If Party B breaches Article 2 ,4 or 5 in the Contract, the responsible party shall pay pursuant to the amount of ten percent (10%) of the contract price (methods for computing the amount of breach of contract damages and the compensation for losses).乙 方違反本合同第 2、4或者5條約定,應當按合同總額的10%賠償支付(支付違約金或損

37、失賠償額的計算方法).6.2 As for the liabilityfor risks involved in a failure or partial failure in researchand development caused by insurmountable technical difficulties under the current technology and conditionoccurringin the process of performance of the Contact, it shallbe undertaken by the both parties

38、in accordance with the following stipulations: undertaking by both sides appointments, appointments first .Confirmed by both parties, the technical risk stipulated in the Contact shall be assessed in the manner of acquirements of authority accepted . The main content of the technicalrisk assessments

39、hall include its existence, scope, degree, loss and so on. The technicalrisk assessmentshould have the following basic conditions:在本合同履行中,因出現在現有技術水平和條件下難以克服的技術困難,導致研究開發失敗或部分失敗,并造成一方或雙方損失的,雙方按如下約定承擔風險損失：雙方約定承擔,約定優先.雙方確定,本合同工程的技術風險按當事人認可的專家權威機構確認的方式認定.認定技術風險的根本內容應當包括技術風險的存在、范圍、程度及損失大小等.認定技術風險的根本條件是：(1

40、)The technique mentioned in the Contract is difficult enough for the present technologic level;本合同技術在現有技術水平條件下具有足夠的難度；(2)Party B subjectively commits no fault and the failure of research and developmentis considered by experts as reasonable.乙方在主觀上無過錯且經認定研究開發失敗為合理的失敗.6.3 Once one party discovers that

41、 the situation is likely to cause a failure or partial failurein research and development, the Discoverer shall inform the other party of thesituation within five days and take appropriate measures to reduce losses.If one partyfails to inform the other party in due time and take appropriate measures

42、 and as a result the losses are aggravated, the responsible Party shall bear the liability for the aggravated part of the losses.一方發現技術風險存在并有可能致使研究開發失敗或局部失敗的情形時,應當在 5 日內通知另一方并采取適當舉措減少損失.逾期未通知并未采取適當舉措而致使損失擴大的,應當就擴大的損失承擔賠償責任.6.4 In the performance of the contract,the technology which is the object of

43、a researchand development has been made public by others (including the form of patent). One party shall notify the other party to rescind the contract within three days. If one party fails to inform the other party in due time and as a result the other party losses occur, the other party has right

44、to claim compensation for its losses.在本合同履行中,因作為研究開發標的技術已經由他人公開(包括以專利權方式公開),一方應在3日內通知另一方解除合同.逾期未通知并致使另一方產生損失的,另一方有權要求予以賠償.Article 7 Taxes and Duties第七條稅費Any tax relating to the implementation of the contract imposed shall be afforded by each party respectively.甲乙雙方將各自承擔所在國(地區)所應支付的稅費.Article 8Force Majeure第八條不可抗力Force majeure shall refer to wa