yb-37消防產品型式認可申請書

1、消防產品型式認可申請書APPLICATION FOR TYPE-APPROV AL OF FIRE PRODUCTS首次申請 /First Application擴大范圍申請 /Scope Expansion 證書延續申請 /Renewal換版申請 /Format Change 申請企業名稱 / Application product category :(加蓋公章 /Seal)生產廠名稱 / Factory:申請產品類別 /Category of Product:填報日期 /Submission Date (yyyy/mm/dd)：年 月 日公安部消防產品合格評定中心印制Published

2、by China Certification Center for Fire Products, Ministry of Public Security, PRC申請企業須知1、申請企業必須嚴格按照消防類產品型式認可實施規則中工 廠基本條件的要求建立并實施有效的質量管理，確保企業的質量 保證能力符合實施規則的基本要求；2、申請企業必須符合消防類產品型式認可實施規則中生產設 備及檢驗設備的最低配置要求；3、申請企業須嚴格遵守型式認可程序及時限要求，正常情況下， 接到工廠檢查通知后的 30 日內應接受工廠條件檢查， 并應在規定 時間內完成對不符合項的整改工作， 自抽樣之日起 15 日內將樣品 送到

3、指定檢測機構進行檢驗，并按期繳納相關費用；如遇特殊原 因，必須及時通報公安部消防產品合格評定中心；4、申請企業獲證后，必須嚴格按照消防類產品型式認可實施規 則的規定，正確使用型式認可證書和標志。對有違規者，公安 部消防產品合格評定中心將進行嚴肅處理。5、申請企業獲證后， 所生產及銷售的產品必須與發證檢驗樣品保 持一致，產品質量必須符合型式認可規則和相關標準要求。若必 須對涉及產品一致性的關鍵因素，如關鍵原器件、原材料、關鍵 設計及主要生產工藝發生變更，以及生產場地搬遷、法人及主要 技術人員發生變更時，獲證企業必須及時向公安部消防產品合格 評定中心申報，由中心按照消防類產品型式認可實施規則要 求

4、安排確認工作。未經中心確認，不得生產及銷售產品，對違規 者，公安部消防產品合格評定中心將進行嚴肅處理，由此而導致 的一切責任均由違規企業承擔。The Notice of the Applica nt1. The Applicant must not only constitute a quality control and bring into effect which according to the request of the factorys postulate, but also make sure the quality guara ntee capacity of the cor

5、porati on accord ing to the request of the impleme nt rules.2. The applicant must measure up the lowest configuration requirement of producing equipment and checking equipment that refers to the The Implement Rules Of The fire fighting product Type-Approval.3. The applicant must follow the authentic

6、ation procedure and the time limit requirement. In normal condition, the enterprise should accept the work condition inspection within 30 days after receive the information, and finish the modificati on of the un accepted item within stated time. The en terprise should send the sample to the appo in

7、 ted exam ine in stituti on in 15days after thein specti on, and pay for the related bill. The en terprise should declare to CCCF in time if there is any special case.4. After getting the certificate, the applicant must follow the implement rules strictly and use authorized certificate and symbol co

8、rrectly. CCCF will sternly punish the foul.5. After getting the certificate, the applicant must keep the products they produce and sell the same with the in spect ing samples. The quality of the products must measure up the authe nticati on regulati ons and the correlative sta ndards. If the some ke

9、y factors that related to the coherenceof the products have to be modified, such as key source apparatus, raw material, core design and primary produce tech niq ue, as well as the workplace, juridical pers on and key tech ni cal pers onnel cha nge, the en terprise must declare to CCCF. And CCCF vali

10、dates the situation according to the implement rules. The enterprise can't produce and sell any products without the validati on. CCCF will ster nly punish the foul. And the foul is charged of all the correlative obligati on.我代表申請企業鄭重聲明：1. 本企業遵循“誠信第一”的基本原則，承諾遵守國家有關法律法規及公安部消 防產品合格評定中心(以下簡稱CCCF)制定

11、的型式認可實施規則的所有要求 及型式認可程序。2. 本企業同意按型式認可規則的要求提供評價所需文件和資料，所提供的信息 均真實有效，否則承擔由此引起的一切法律責任。3. 本企業保證按型式認可合同及相關要求支付型式認可費用，并為實施型式認 可產品型式認可工作提供所需要的資源。4. 本企業將妥善保管檢驗報告、工廠檢查報告和型式認可變更確認等型式認可 的相關資料，以備監督檢查、飛行檢查及有關證后監督工作時使用，公安部消 防產品合格評定中心將不承擔獲得產品合格型式認可的生產廠或銷售商應承擔 的法律責任。5. 本企業完全接受申請企業須知中所涉及的全部?jī)?nèi)容。StatementI, on the behal

12、f of the Applicant, make the statement hereby:1. The Applica nt is willi ng to comply with the Impleme nt Rules for Type-Approval formulatio n which by Chi na Certificati on Cen ter for Fire Products (So-called as CCCF).2. The Applicant does agree to submit the necessarydocuments and information whi

13、ch truthf uln ess has bee n en sured by the Applicandm this otherwise un dertakes all legal liability which causes.3. The Applica nt guara ntee to make the payme nt in accorda nee with the Type-Approval Con tract an d/or the releva nt requireme nt.4. The Applica nt will keep ing the releva nt in for

14、mati on about authe nticati on properly, such as the prove report, jerque report of factory and the validate of the authentication change, which will be used in the supervise in spect, sudde n in spect and the supervisal task after applicati on. CCCF will not toe the scratchwhich must be bearedby th

15、e factory or mercha ntwho get the product eligibility authe nticati on.5. The Applica nt does accept the con tentThe no tice of the Applicantc ontain ed.申請企業法定代表人 /Authorized Person of the Applicant Firm(簽名 Sig nature/ 蓋章 Sea)日期 /Date (yyyy/mm/dd):年 月 日、申請企業名稱、地址及聯系A(chǔ)pplicant Information1 申請企業 /Appli

16、cant Firm:1.1 申請企業名稱 / Name in Chinese and English:盒方式1.2 申請人地址、郵編 /Mailing A ddress and Postcode 注冊地址 Registration address:郵編：通訊地址 Maili ng address :郵編：1.3 法定代表人 / Juridical Pers on: 電話 /Tele phone:手機 /Mobile phone1.4 聯系人 / Person to be Contacted:電話 /Telephone:手機 /Mobile phone1.5 傳真 /Fax: 1.6 電子郵件/

17、E-mail: 1.7 組織機構代碼 / Organizations and agencies code： 1.8 組織性質代碼/ Organization nature code : （按本申請書第六項的要求填寫）2 制造商 / Manufacturer2.1 制造商 名稱/ Name in Chinese and English: 2.2 制造商地址、郵編 / Manufacturer Address and Postcode注冊地址 Registration address:郵編：通訊地址 Maili ng address :郵編：2.3 法定代表人 / Juridical Person

18、:電話 /Telephone:手機 /Mobile phone2.4 聯系人 / Person to be Contacted電話 /Telephone:手機 /Mobile phone2.5 傳真 /Fax: 2.6 電子郵件/E-mail: 2.7 組織機構代碼 /組織機構代碼 / Organizations and agencies code:2.8 組織性質代碼 / Organization nature code:求填寫)生產廠/factory:3.1 生產廠名稱 / Name in Chinese and English:（按本申請書第六項的要3.2實際生產廠地址、郵編 /Addr

19、ess & Postcode:注冊地址 Registration address:郵編：通訊地址 Maili ng address :郵編：實際生產廠地址 Actual plant address:郵編：3.3 法定代表人 / Juridical Person (if applicable ) :電話 /Telephone:手機 /Mobile phone3.4 聯系人 / Person to be Contacted電話 /Telephone:手機 /Mobile phone3.5 傳真 /Fax:3.6電子郵件/E-mail:3.7 組織機構代碼 Organizations and

20、 agencies code: 3.8組織性質代碼/ Organization nature code : (按本申請書第六項的要求填寫)4 企業注冊資本 / Enterprise registered capital: (萬元 / Ten thousand Yuan)，經營范圍Management scope： 5 單位總?cè)藬?shù) /Enterprise total number of people ，高級技術職稱人數 / High-level technical titlepopulation，中級技術職稱人數 / Intermediate technical title population

21、 ，初級技術職稱人數 / Primary technical title population 。設計開發技術人員 / Design development technical personnel，生產制造技術人員 /Manufacturing technical personnel，產品檢驗技術人員 / Product inspection technicalpersonnel，售后服務技術人員 / Post-sale service technical personnel ， 其他技術人（注：上述人數均為所涉及申請產品的人數）員 / Other tech nical personnel6

22、申請型式認可產品的最大年生產能力/ Application pattern approval product most bumper yearproductivity :。（例：滅火器XX具/年；防火門XXX平米/年；消防應急燈具 XX具/年等）7 申請型式認可產品使用型式認可標志形式/ The application pattern approval product use patternapproves the symbol form :A、消防產品身份信息發布及標志/ Fire product status information issue and symbol ；B、 普通消防產品型

23、式認可標志/ Ordinary fire product pattern approval symbol ;。8中國代表處或中國辦事處名稱，聯系人姓名，地址，郵編，電子郵件、電話、移動電話及傳真/Applicant ' representative or local office in China, Person to be contacted, Address & Postcode, E-mail,Teleph one, Mobile No. & Fax No.: 、申請型式認可產品情況Product In formati on for Type-Approval序號

24、Serial No.產品名稱（按產品實施規則中 相關要求填寫）Name of Product型號規格Model and Specification執行標準Impleme nted Stan dard商標（自愿填報）Trademark產品檢驗選擇相應的國家級消防產品 質量監督檢驗中心名稱Name of the National Quality Control & Testi ng Cen ter for Fire Products as Selected國家固定滅火系統和耐火構件質量監督檢驗中心/Tianjin fire Research Institute （天津）國豕消防裝備質量監督

25、檢驗中心/China National FireEquipme nt Quality Supervisi on Cen ter （上海）國豕消防電子產品質量監督檢驗中心/Shen ya ng FireResearch In stitute （沈陽） 國家防火建筑材料質 量監督檢驗 中心/Sichuan Fire Research Institute （四川）備注/Note：注：若申請企業屬證書延續申請，在備注欄中注明是全部產品或是部分產品換證，并提交申請換證產品型式認可證書復印件 / If applies for the enterprise to need to transform the

26、certificate, needs to indicate is the complete product or thepartial products, and must submit the application product the pattern approval certificate copy申請型式認可產品名稱、型號及照片（與申請產品一一對應）Product Name, Type and Photo for Type-ApprovalProduct Photo名稱型號NameModel名稱Name貼照片處Product Photo型號Model三、申 請 企 業 承 諾我代

27、表申請企業鄭重承諾：1始終遵守型式認可計劃安排的有關規定； 2為進行評價作出必要的安排，包括配合檢查組的工作、允許檢查組進入 需進行檢查的區域、查閱所有的記錄（包括內部審核報告、人員評價文件 等）、提供必要的交通工具等； 3按合同規定和相關規定，及時繳納各項費用，及時從“中國消防產品信 息網”獲取相關信息； 4按有關法律法規、規章的要求，正確使用證書和標志；5 謹慎使用產品型式認可結果， 不損害公安部消防產品合格評定中心的聲 譽；不對社會產生誤導，不未經許可發表聲明； 6當證書被暫停、撤銷、中止型式認可程序時，立即停止涉及型式認可內 容的廣告及宣傳，并按要求將所有型式認可文件（至少應包含型式認

28、可證 書及型式檢驗報告）交回公安部消防產品合格評定中心，封存型式認可標 志；7在傳播媒體中對產品型式認可內容的引用，嚴格遵守國家的相關要求。申請企業法定代表人簽字：（加蓋公章 ）年月Commitment of the Applicant FirmI represent apply for the enterprise to pledge seriously ：1： Make a Statement related to the certification only in the scope of approved certification2： In order to carry on the

29、 appraisal to make the essential arrangement, including the coordinate inspection team's work, the permission inspection team enters must carry on the inspection the region, consult all records (including internal check report, personnel to appraise document and so on), to provide the essential

30、transportation vehicle and so on.3： According to the contract provision and the related stipulation, pay each item of fee promptly, promptly from “ Chinese fire prevention product information network” gain related information4：According to the relevant law laws and regulations, the rules and regulat

31、ions request, uses the certificate and the sign correctly5： The discrete use product authentication result, does not harm the Ministry of Public Security fire prevention product qualified assessment center the prestige; Does not have misleading to the society, not issues the statement without the pe

32、rmission6： When the certificate is suspended, the cancellation, stops authenticating the procedure, immediately stops involving the authentication content the advertisement and the propaganda, and will possess the authentication document according to the request (to contain authentication certificat

33、e and pattern survey report at least) returns the Ministry of Public Security fire prevention product qualified assessment center, seals the authentication symbol7： In the communication media to the product authentication content's quotation, should meet the national related requirementSignature ：Signed by the authorized