SFP GBIC 光模塊相關(guān)參數(shù)_圖文

1、 Americas Headquarters: 2007 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706USAGigabit Interface Converter (GBIC Module and Small Form-Factor Pluggable (SFPGBIC Module Installation Information and SpecificationsGBIC Product Numbers: WS-G548

2、4, WS-G5486, WS-G5487, CWDM-GBIC-1470=, CWDM-GBIC-1490=,CWDM-GBIC-1510=, CWDM-GBIC-1530=, CWDM-GBIC-1550=, CWDM-GBIC-1570=, CWDM-GBIC-1590=,CWDM-GBIC-1610=SFP Product Numbers: SFP-GE-S=, SFP-GE-L=, SFP-GE-Z=, GLC-SX-MM=, GLC-LH-SM=, GLC-ZX-SM=, GLC-T=,CWDM-SFP-1470=, CWDM-SFP-1490=, CWDM-SFP-1510=,

3、CWDM-SFP-1530=, CWDM-SFP-1550=,CWDM-SFP-1570=, CWDM-SFP-1590=, CWDM-SFP-1610=Revision History TableThe Document Revision History table below,beginning with OL-5007-06,records technical changes to this document.IntroductionThis document provides information about Gigabit Interface Converter (GBIC mod

4、ules and small form-factor (SFPGBIC modules on the Cisco 7200VXR routers,the Cisco 7201router,the Cisco 7301router,the Cisco 7304router,the Cisco 7401ASR router,the Cisco 7500series routers,the Cisco 7600series routers,the Cisco 10008router,the Cisco 12000series routers,and the Cisco uBR7246VXR cabl

5、e router and Cisco uBR10012 cable router. The GBIC modules and SFP modules are input/output devices that plug into a Gigabit Ethernet (GE port, linking the port with a 1000BASE-X fiber-optic network.The devices are used on Cisco platforms that have Gigabit Ethernet interfaces.Document Version Date C

6、hange SummaryOL-5067-07April, 2007This version adds Cisco 7201 support.OL-5067-06December, 2006This version adds SFP module SFP-GE-S, SFP-GE-L,and SFP-GE-Z information.ContentsAlso see the documentation that shipped with the GBIC module or SFP module or the installation guidefor your router, I/O con

7、troller, processor engine, or port adapter.ContentsThis document contains the following sections:Related Documentation, page2GBIC Module and SFP Module Overview, page4Cisco 1000BASE-T SFP Modules, page8CWDM GBIC Module and SFP Module Description and Information, page9Mode-Conditioning Patch Cord Des

8、cription, page13Installation Prerequisites, page14Installing and Removing the GBIC Module or SFP Module, page15Installing a GBIC Module, page16Installing an SFP Module, page18Installing the GBIC Module or SFP Module Interface Cables, page20Fiber-Optic Cleaning Information, page22Obtaining Documentat

9、ion, Obtaining Support, and Security Guidelines, page22Related DocumentationThe Cisco IOS software running on your router contains extensive features and functionality,which aredocumented online and in the following resources:Cisco IOS software configuration documentation contains Cisco IOS software

10、 configurationinformation and support. See the modular configuration and modular command referencepublications in the set that corresponds to the software release installed on your Cisco hardware.Access these documents at: For hardware installation and maintenance information, refer to the following

11、 documents:Cisco7200 series routers:Cisco 7200 Series Routers Documentation RoadmapCisco 7201 router:Cisco 7201 Router Documentation RoadmapCisco 7301 router:Cisco 7301 Internet Router Documentation RoadmapCisco 7304 router:Cisco 7304 Internet Router Documentation RoadmapCisco 7401ASR router:Cisco 7

12、401ASR Router Documentation RoadmapGigabit Interface Converter (GBIC Module and Small Form-Factor Pluggable (SFP GBIC Module Installation Information and SpecificationsRelated DocumentationCisco 7500 series routers:Cisco 7500 Series Routers Documentation RoadmapCisco 7600 series routers:Cisco 7600 S

13、eries Internet Router Installation GuideCisco 7609 Internet Router Installation GuideCisco 10000 ESR routers:Cisco 10000 Series Routers Line Card Hardware Installation GuideCisco12000 series routers:Cisco 12000 Series Internet Router Line Card Documentation RoadmapCisco uBR7246VXR cable router and C

14、isco uBR10012 cable router:Cisco uBR10012 Universal Broadband Router Hardware Installation GuideCisco uBR7246VXR Universal Broadband Router Hardware InstallationFor international agency compliance, safety, and statutory information for WAN interfaces:Site Preparation and Safety GuideRegulatory Compl

15、iance and Safety Information for the Cisco 7200 Series RoutersRegulatory Compliance and Safety Information for the Cisco 7301 Internet RouterRegulatory Compliance and Safety Information for Cisco 7304 Internet RouterRegulatory Compliance and Safety Information for the Cisco 7401ASR Internet RouterRe

16、gulatory Compliance and Safety Information for Cisco 7500 Series RoutersRegulatory Compliance and Safety Information for the Cisco 7600 Series RoutersRegulatory Compliance and Safety Information for Cisco 12000 Series Internet Routers To view Cisco documentation or obtain general information about t

17、he documentation, refer to the “Obtaining Documentation, Obtaining Support, and Security Guidelines” section on page22.Gigabit Interface Converter (GBIC Module and Small Form-Factor Pluggable (SFP GBIC Module Installation Information and SpecificationsGigabit Interface Converter (GBIC Module and Sma

18、ll Form-Factor Pluggable (SFP GBIC Module Installation Information and SpecificationsGBIC Module and SFP Module OverviewGBIC Module and SFP Module OverviewThe following topics are in this section:SFP and GBIC Short Wavelength Modules, page 7SFP and GBIC Long Wavelength Modules, page 7SFP and GBIC Ex

19、tended Wavelength Modules, page 7GBIC Module and SFP Module Cabling and Connection Equipment, page 7The GBIC module and SFP module are input/output (I/Odevices that plug into a Gigabit Ethernet port,linking the port with a 1000BASE-X fiber-optic network.A GBIC module is shown in Figure 1,and an SFP

20、module in Figure 2.NoteOther GBIC modules and SFP modules exist for technologies other than Gigabit Ethernet.However,the information in this document is for GBIC modules and SFP modules that plug in to only Gigabit Ethernet ports.Figure 1GBIC ModuleFigure 2SFP ModuleThe GBIC module and SFP module ha

21、ve a receiver port (RXand a transmitter port (TXthat make up one optical interface.1Receiver (RX2Transmitter (TX10130812101310Gigabit Interface Converter (GBIC Module and Small Form-Factor Pluggable (SFP GBIC Module Installation Information and Specifications GBIC Module and SFP Module OverviewThe f

22、ollowing tables provide information and specifications:Table 1,“GBIC Module and SFP Module Options”Table 2,“GBIC Module and SFP Module Transmit Power, Receive Power, and Power Budget”Table 3,“SFP-GE-S, SFP-GE-L, and SFP-GE-Z Module Transmit Power, Receive Power, and Power Budget”Table 4,“GBIC Module

23、 Specifications”Table 5,“SFP Module Specifications”Table 3 provides power budget information for the SFP-GE-S, SFP-GE-L, and SFP-GE-Z modules.T able 1GBIC Module and SFP Module OptionsGBIC Module Product Number SFP Module Product Number GBIC Module or SFP Module DescriptionWS-G5484GLC-SX-MM Short wa

24、velength (1000BASE-SXContains a Class 1 laser of 850 nm for1000BASE-SX (short wavelength applications.WS-G5486GLC-LH-SMLong wavelength/long haul (1000BASE-LX/LHContains a Class 1 laser of 1300nm for 1000BASE-LX/LH (long wavelengthapplications.WS-G5487GLC-ZX-SMExtended distance (1000BASE-ZXContains a

25、 Class 1 laser of 1550nm for 1000BASE-ZX (extended wavelengthapplications.T able 2GBIC Module and SFP Module T ransmit Power, Receive Power, and Power BudgetGBIC Moduleand SFP Module Transmit Power Receive PowerPower Budget Minimum Maximum Minimum Maximum WS-G5484 and GLC-SX-MM 9.5 dBm 11.For fiber

26、types 50/125m, NA = 0.20 fiber and 62.5/125m, NA = 0.275 fiber.4 dBm 117 dBm 0 dBm 7.5 dBm 22.For fiber types 50/125m MMF and 62.5/125m MMF.WS-G5486 and GLC-LH-SM 9.5 dBm 311.5dBm 43.For fiber types 9/125m SMF.4.For fiber types 62.5/125m MMF and 50/125m MMF.3 dBm 55.For fiber types 9/125m SMF, 62.5/

27、125m MMF, and 50/125m MMF.20 dBm 3 dBm 7.5 dBm 6 and 8.0 dBm 76.For fiber types 50/125m MMF and 62.5/125m MMF.7.For fiber type 10m SMF.WS-G5487 and GLC-ZX-SM0 dBm5.2 dBm24 dBm3 dBm24 dBmGBIC Module and SFP Module OverviewTable 4 lists the GBIC module physical specifications and Table 5 lists the SFP

28、 module physical specifications.T able 3SFP-GE-S, SFP-GE-L, and SFP-GE-Z Module T ransmit Power, Receive Power, and Power BudgetSFP Modules Transmit Power Receive Power Power Budget Minimum Maximum Minimum Maximum SFP-GE-S -9.5 dBm 11.For fiber types 50/125 mm, NA = 0.20 fiber and 62.5/125 mm, NA =

29、0.275 fiber.-4 dBm 1-17 dBm 0 dBm 7.5 dBm 22.For fiber types 50/125 mm MMF and 62.5/125 mm MMF.SFP-GE-L -9.5 dBm 3-11.5dBm 43.For fiber types 9/125 mm SMF.4.For fiber types 62.5/125 mm MMF and 50/125 mm MMF.-3 dBm 55.For fiber types 9/125 mm SMF, 62.5/125 mm MMF, and 50/125 mm MMF.-20 dBm -3 dBm 7.5

30、 dBm 6and 8.0dBm 76.For fiber types 50/125 mm MMF and 62.5/125 mm MMF.7.For fiber type 10 mm SMF.SFP-GE-Z0 dBm5 dBm-23 dBm0 dBm-24 dBmT able 4GBIC Module SpecicationsSpecificationDescriptionDimensions (H x W x D0.39 in. x 1.18 in. x 2.56 in.(1 cm x 3 cm x 6.5 cmConnectors Multimode fiber-optic: SC-t

31、ype connector Single-mode fiber-optic: SC-type connector WavelengthWS-G5484: 850 nm WS-G5486: 1300 nm WS-G5487: 1550 nmCabling distance (maximumWS-G5484: 1804 feet (550 mWS-G5486: 6.2 miles (10 kmWS-G5487: 43.5 to 62.1 miles (70 to 100 kmT able 5SFP Module SpecicationsSpecificationDescriptionDimensi

32、ons (H x W x D0.33 in x 0.53 in x 2.22 in (8.5 mm x 13.4 mm x 56.5 mmConnectors Multimode fiber-optic: LC-type connector Single-mode fiber-optic: LC-type connector WavelengthGLC-SX-MM: 850 nm GLC-LH-SM: 1300 nm GLC-ZX-SM: 1550 nmCabling distance (maximumGLC-SX-MM: 1804 feet (550 mGLC-LH-SM: 6.2 mile

33、s (10 kmGLC-ZX-SM: 43.5 to 62.1 miles (70 to 100 kmGBIC Module and SFP Module OverviewSFP and GBIC Short Wavelength ModulesThe 1000BASE-SX (short wavelength GBIC module operates on standard multimode fiber-optic linkspans of up to 1804 feet (550m. (See Table6.SFP and GBIC Long Wavelength ModulesThe

34、1000BASE-LX/LH (long wavelength/long haul GBIC module interfaces fully comply with theIEEE 802.3z 1000BASE-LX standard. However, their higher optical quality allows them to reach6.2miles(10 km over single-mode fiber (SMF versus the 3.1 miles (5km specified in the standard. SFP and GBIC Extended Wave

35、length ModulesThe1000BASE-ZX(extended wavelengthGBIC module operates on ordinary single-mode fiber-opticlink spans of up to 43.5 miles (70 km. Link spans of up to 62.1 miles (100 km are possible usingpremium single-mode fiber or dispersion-shifted single-mode fiber (premium single-mode fiber has alo

36、wer attenuation per unit length than ordinary single-mode fiber;dispersion-shifted single-mode fiberhas both lower attenuation and less dispersion.The 1000BASE-ZX GBIC module must be coupled to single-mode fiber-optic cable, which is the typeof cable typically used in long-haul telecommunications ap

37、plications.The1000BASE-ZX GBIC modulewill not operate correctly when coupled to multimode fiber, and it is not intended to be used inenvironments where multimode fiber is frequently used(for example,building backbones,or horizontalcabling.The 1000BASE-ZX GBIC module is intended to be used as a Physi

38、cal Medium Dependent (PMDcomponent for Gigabit Ethernet interfaces found on various switch and router products.It operates at asignaling rate of 1250 Mbaud, transmitting and receiving 8B/10B encoded data.When shorter lengths of single-mode fiber are used, it may be necessary to insert an in-line opt

39、icalattenuator in the link to avoid overloading the receiver.Insert a 10-dB in-line optical attenuator between the fiber-optic cable plant and the receiving port on the 1000BASE-ZX GBIC module at each end of the link whenever the fiber-optic cable span isless than 15.5 miles (25 km.Insert a5-dB in-l

40、ine optical attenuator between the fiber-optic cable plant and the receiving port on the1000BASE-ZX GBIC module at each end of the link whenever the fiber-optic cable span is equalto or greater than 15.5 miles (25 km but less than 31 miles (50 km.GBIC Module and SFP Module Cabling and Connection Equ

41、ipmentThe GBIC module port is a 1000-Mbps optical interface in the form of an SC-type duplex port (seeFigure1 that supports IEEE 802.3z interfaces compliant with the 1000BASE-X standard.Table6 provides cabling specifications for the GBIC modules and SFP modules that you install inGigabit Ethernet de

42、vices. Note that all GBIC module ports have SC-type connectors and all SFP portshave LC-type connectors.Cisco 1000BASE-T SFP ModulesThe minimum cable distance for the WS-G5484 or GLC-SX-MM and WS-G5486 or GLC-LH-SM (multimode fiber MMFand single-mode fiber SMFis 6.5feet (2m,and the minimum link dist

43、ance for the WS-G5487or GLC-ZX-SM is 6.2miles (10kmwith an 8-dB attenuator installed at each end of the link. Without attenuators, the minimum link distance for the WS-G5487 or GLC-ZX-SM is 24.9miles (40km.NoteThe 1000BASE-ZX GBIC module and SFP modules provide an optical power budget of 21.5 dB. Yo

44、u should measure your cable plant with an optical loss test set to verify that the optical loss of the cable plant (including connectors and splicesis less than or equal to 21.5dB.The optical loss measurement must be performed with a 1550-nm light source.Cisco 1000BASE-T SFP ModulesThe 1000BASE-T (G

45、LC-T SFP module is compliant with IEEE 802.3:2000 and plugs into a standard Gigabit Ethernet SFP module port. It operates on standard Category 5 wiring and has an RJ-45connector.T able 6GBIC and SFP Module Port Cabling SpecicationsGBIC Module SFP Modules Wavelength (nmFiber Type Core Size (micronMod

46、al Bandwidth (MHz-kmMaximumCable Distance WS-G5484 or GLC-SX-MMSFP-GE-S or GLC-SX-MM850MMF 11.Multimode fiber (MMF only.62.5160722 ft (220 m62.5200902 ft (275 m50.04001640 ft (500 m50.05001804 ft (550 mWS-G5486 or GLC-LH-SM SFP-GE-L or GLC-LH-SM1300MMF 2 and SMF2. A mode-conditioning patch cord is r

47、equired.When using the WS-G5486or GLC-LH-SM with 62.5-micron diameter MMF,you must install a mode-conditioning patch cord between the GBIC module or SFP module and the MMF cable on both the transmit and the receive ends of the link when link distances are greater than 984ft (300 m.We do not recommen

48、d using the WS-G5486or GLC-LH-SM and MMF with no patch cord for very short link distance (tens of meters.The result could be an elevated bit error rate (BER.62.55001804 ft (550 m50.04001804 ft (550 m50.05001804 ft (550 m9/10 6.2miles (10kmWS-G54873 or GLC-ZX-SM3.You can have a maximum of 12 1000BASE

49、-ZX GBIC modules or SFP modules per system to comply with EN55022 Class B and 24 1000BASE-ZXGBIC modules or SFP modules per system to comply with FCC Class A regulations.SFP-GE-Z or GLC-SX-SM1550SMF 9/1043.5 miles (70kmSMF 44.Dispersion-shifted single-mode fiber-optic cable.862.1 miles (100kmCWDM GB

50、IC Module and SFP Module Description and InformationSee your router installation and configuration guide to determine which routers support the GLC-T SFP module.CWDM GBIC Module and SFP Module Description and InformationCoarse Wavelength-Division Multiplexing (CWDM GBIC modules and Coarse Wavelength

51、-Division Multiplexing (CWDM SFP modules are supported on a variety of Cisco products. For more information, see the Cisco CWDM GBIC Compatibility Matrix and the Cisco Coarse Wavelength-Division Multiplexing SFP Compatibility Matrix.Figure 3CWDM GBIC ModuleT able 7GLC-T SFP Module SpecicationsSpecif

52、icationDescriptionDimensions (H x W x D.055in.x .054in.x 2.8in (14.0mm.x 13.7mm.x 71.1 mmCabling Distance (maximum328 feet (100 mPower consumption 1.1W Product numberGLC-T=1Color band on label 5Optical bore dust plug 2Alignment groove 6Receive optical bore 3Spring clip7Color dot4Transmit optical bor

53、eS I N G L E -MO D E 1000B A S E -C W D M G B I CC WD M -G B I C -1550=256173484472CWDM GBIC Module and SFP Module Description and InformationFigure 4CWDM SFP ModuleThe Cisco CWDM GBIC module and SFP modules enables the transport of up to eight channels (Gigabit Ethernet over single-mode fiber stran

54、ds.(They also support the transport of up to eight channels Fiber Channel over single-mode strands, although Fiber Channel is not discussed in this document. Cisco CWDM GBIC modules have SC-type connectors, and Cisco CWDM SFP modules have LC-type connectors. They are compatible with 1000BASE-X stand

55、ard as specified in IEEE 802.3z. The Cisco CWDM GBUC modules and SFP modules are passive and require no power nor conguration. The Cisco CWDM modules support online insertion and removal (OIR.See your router installation and configuration guide for the Cisco CWDM GBIC modules and SFP modules support

56、ed on your router.The following tables provide specification information:Table 8,“CWDM GBIC Module Options”Table 9,“CWDM GBIC Module Electrical Power Interface Information”Table 10,“CWDM GBIC Module Optical Parameters”Table 11,“CWDM SFP Module Options”Table 12,“CWDM SFP Module Electrical Power Inter

57、face Information”Table 13,“CWDM SFP Module Optical Parameters”1Color arrow on label 4Color coded bale clasp 2Receive optical bore 5Optical bore dust plug3Transmit optical bore94071CW D M S F P G C C F R L N S N O H 12345T able 8CWDM GBIC Module OptionsProduct Number DescriptionColor CWDM-GBIC-1470=Cisco 1000BASE-CWDM GBIC 1470 nm Gray CWDM-GBIC-1490=Cisco 1000BASE-CWDM GBIC 1490 nm Violet CWDM-GBIC-1510=Cisco 1000BASE-