插入文件06ups正常操作流程

1、Pure 目的1.1 This1.establishes a procedure to operate the UPS.本文建立一個標準的操作 UPS 系統。This SOP apps to Eaton UPS.此文適用于系列 UPSDefinitions 定義2.1 The term UPS refer to the Unerruptible Room.2.er Supply locatedevel 2 TERUPS 這個詞是指 2 樓 TER 房間的不間斷電源系統。Responsibilities 責任3.1 This procedure should be executed by tra

2、ined3.nel only and approval isrequired from Citi Bt this procedure responsibility of allnel. Or designees, are responsible for ensuringis properly implemented and administered. It is the nel involved with the EOP to comply with theprovis of this procedure.此文件中的步驟只能由專業來在得到花旗批準后進行操作。或指派相關確認此步驟可以實施。所有參

3、與緊急操作步驟的員工都有責任遵守步驟中的所有內容。 Standard Operation ProcedureEL SystemO&M Manual Section X ELProcedure Name: 步驟名稱Revi: 版本Page:頁碼001 of 03Procedures 步驟4.1 UPS start up./UPS 基本開機4.1. Turn on UPS input breaker, UPS is running at sthe same time the UPS will alarm.ic bypass mode. At閉合配電箱 UPS 輸入開關，UPS 啟動處于靜態旁路供電

4、模式，并有告警；2. Long press the “Invert on” key and waiting for 5 seconds, thesysteme change to inverter supply mode after thealarm sound is stopped automatically.長按控制鍵 ON，等待逆變器啟動告警自動消除后，證明已切換到主路供電模式；3. Turn on the UPS output breaker.閉合配電箱 UPS 輸出開關；4. Finally turn on the battery isolation breaker, the UPS

5、 finishedstartup now.最后閉合電池組開關，基本開機完成。4.2 UPS turn off/UPS 基本關機1. Long press the “Invert ff” key and waiting for 5 seconds, the systeme changed to sic bypasser supply mode and the alarmsound iive automatically.長按控制鍵 OFF，關閉逆變器并伴隨有告警，證明主路已關閉切換到靜態旁路供電模式；2.Turn off the UPS output breaker, then turn off

6、the UPS input breaker.先斷開配電箱 UPS 輸出開關，再斷開配電箱 UPS 輸入、開關，此時 UPS 由電池組供電；3.Finally turn off the battery isolation breakers, the UPS is turn offcompley.最后斷開電池組開關，UPS 整體處于關機狀態。 Standard Operation ProcedureEL SystemO&M Manual Section X ELProcedure Name: 步驟名稱Revi: 版本Page:頁碼002 of 03Procedure Name: 步驟名稱Revi: 版本Page:頁碼003 of 034.3Description of the button of control panel