![海思3559A pwm驅動編寫記錄_第1頁](http://file4.renrendoc.com/view/fd3ed827b40cd88bd0e842db7d082ae2/fd3ed827b40cd88bd0e842db7d082ae21.gif)
![海思3559A pwm驅動編寫記錄_第2頁](http://file4.renrendoc.com/view/fd3ed827b40cd88bd0e842db7d082ae2/fd3ed827b40cd88bd0e842db7d082ae22.gif)
![海思3559A pwm驅動編寫記錄_第3頁](http://file4.renrendoc.com/view/fd3ed827b40cd88bd0e842db7d082ae2/fd3ed827b40cd88bd0e842db7d082ae23.gif)
![海思3559A pwm驅動編寫記錄_第4頁](http://file4.renrendoc.com/view/fd3ed827b40cd88bd0e842db7d082ae2/fd3ed827b40cd88bd0e842db7d082ae24.gif)
![海思3559A pwm驅動編寫記錄_第5頁](http://file4.renrendoc.com/view/fd3ed827b40cd88bd0e842db7d082ae2/fd3ed827b40cd88bd0e842db7d082ae25.gif)
版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、由于hisi3559a的內核中未包含pwm驅動,故需自己編寫。.修改Kconfig文件翻開XXX/drivers/pwm文件夾(XXX代表內核路徑)中的Kconfig文件 增加如下 內容config PWM.HISItristate hisi3559a PWM support by zd zjhhelpGeneric PWM framework driver for hisi3559a by zd zjh.這樣在menuconfig中將增加對應的選項.修改 makefile翻開XXX/drivers/pwm文件夾(XXX代表內核路徑)中的Makefile文件增加如下內容obj-$(CONFIG
2、_PWM_HISI)+ 二 pwm-hisi.o即根據menuconfig中是否選擇PWM_HISI來決定是否編譯我們將要添加的驅動程 序。.編寫pwm驅動在XXX/drivers/pwm文件夾中新增pwm-hisi.c文件編寫內容為:/*Driver for hisi3559a Pulse Width Modulation Controller*Copyright (C) 2021 zjh *Licensed under GPLv2./#include #include compatible = hisilicon,hi-pwm;reg = ;clocks = ;#pwm-cells = ;
3、clock-names = apb_pclk;status =disabled;):pwm2: pwm0 xl80900E0 compatible = hisilicon,hi-pwm;reg = ;clocks = ;#pwm-cells = ;clock-names = apb_pclk;status = disabled;);可以看到,上面的clocks項和時鐘驅動中修改的內容是相關聯的。6.應用層使用例如(Qt)#include#include#include#include#includeQDebug#includeint exportPwm(unsigned int pwm)(in
4、t fd = -1;std:string sPath;if (pwm 3)(sPath = /sys/class/pwm/pwmchip + std:to_string(pwm) + /export;fd = open(sPath.c_str(), O_WRONLY);if (fd 0) TOC o 1-5 h z (printf(open export failedn);return -1;write(fd, 0,2);close(fd);return 0;elsereturn -1;int configPwm(unsigned int pwm, unsigned int period, u
5、nsigned int duty_cycle)(int fd = 0, len_p = 0, len_d = 0;char buf_p32;char buf_d32;std:string sPath;Ien_p = snprintf(buf_p, sizeof(buf_p), %d, period);Ien_d = snprintf(buf_d, sizeof(buf_d), %d, duty_cycle);if (pwm 3)(sPath = 7sys/class/pwm/pwmchip + std:to_string(pwm) + /pwmO/period;fd = open(sPath.
6、c_str(), O_WRONLY);if (fd 0)(printf(open period failedn);return -1;write(fd,buf_p, len_p);close(fd);sPath=7sys/class/pwm/pwmchip+ std:to_string(pwm) +7pwm0/duty_cycle;fd =open(sPath.c_str(),O_WRONLY); TOC o 1-5 h z if (fd0)printf(open duty_cycle failedn);return -1;write(fd, buf_d, len_d);close(fd);r
7、eturn 0;elsereturn -1;int enablePwm(unsigned int pwm)(int fd = 0;std:string sPath;if (pwm 3)sPath = /sys/class/pwm/pwmchip + std:to_string(pwm) + /pwmO/enable;fd = open(sPath.c_str(),O_WRONLY);if (fd 0)(printf(open enable failedn);return -1;write(fd, 1, 2);close(fd);return 0;elsereturn -1;int disabl
8、ePwm(unsigned int pwm)int fd = 0;std:string sPath;if (pwm 3)(sPath = /sys/class/pwm/pwmchip + std:to_string(pwm) + /pwmO/enable;fd = open(sPath.c_str(),O.WRONLY);if (fd 0)(printf(open enable failedn);return -1;write(fd, 0, 2);close(fd);return 0;)elsereturn -1;void setDefalutLumia(void)(int i = expor
9、tPwm(O);if (i != 0)qDebug() pwm export failed!;configPwm(0, 750, 375);enablePwm(O);void initFanPWM(void)int i = exportPwm(l);if (i != 0)qDebug() pwml export failed!;i = exportPwm(2);if (i != 0)qDebug() #includeinux/io.h#includeinux/module.h#includeinux/of.h#includeinux/of device.h#include#include#in
10、cludeinux/platform_device.h inux/pwm.h inux/slab.h#include#includeinux/spinlock.h inux/time.h/寄存器偏移量#include#include0 x00 0 x04 0 x08 OxOC 0 x10 0 x14 0 x18 BIT(O) BIT(l) BIT(2)#define PWM_CFG0#define PWM_CFG10 x00 0 x04 0 x08 OxOC 0 x10 0 x14 0 x18 BIT(O) BIT(l) BIT(2)#define PWM_CFG2#define PWM_CT
11、RL#define PWM_STATEO#define PWM_STATE1#define PWM_STATE2#define PWM_EN#define PWMJNV#define PWM_KEEP struct hisi_pwm_data /bool has_prescaler_bypass;/bool has_rdy;unsigned int npwm;);struct hisi_pwm_chip struct pwm_chip chip;struct elk *clk;void _iomem *base;spinlock_t ctrljock;const struct hisi_pwm
12、_data *data;);static inline struct hisi_pwm_chip *to_hisi_pwm_chip(struct pwm_chip *chip) (return container_of(chip, struct hisi_pwm_chip, chip);)/讀寄存器static inline u32 hisi_pwm_readl(struct hisi_pwm_chip *chip, unsigned long offset)( return readl(chip-base + offset);)/寫寄存器static inline void hisi_pw
13、m_writel(struct hisi_pwm_chip *chip, u32 val, unsigned long offset)( writel(val, chip-base + offset);/配置pwmstatic int hisi_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns)(struct hisi_pwm_chip *hisi_pwm 二 to_hisi_pwm_chip(chip); u32 val = 0;u64 clk_rate = 0; int
14、err;clk_rate = clk_get_rate(hisi_pwm-clk); printk(KERN_CRIT pwm elk rate: %lldn, clk_rate);err = clk_prepare_enable(hisi_pwm-clk); if (err) dev_err(chip-dev, failed to enable PWM clockn); return err;spin_lock(&hisLpwm-ctrl_lock);/val = hisi_pwm_readl(hisi_pwm, PWM_CTRL);/val &二 OxFFFE;/hisi_pwm_writ
15、el(hisi_pwm, val, PWM_CTRL);/val = hisi_pwm_readl(hisi_pwm, PWM_CTRL);/val &二 OxFFFB; /hisLpwm_writel(hisLpwm, val, PWM_CTRL);Ado ( val = hisLpwm_readl(hisi_pwm, PWM_STATE2); printk(KERN_CRIT wait for pwm idle.An);)while(0 x400 = (val & 0 x400);*/if (duty_ns = 1)(hisi_pwm_writel(hisLpwm, duty_ns, PW
16、M_CFG1);printk(KERN_CRIT duty reg have be written.An);)if (period_ns = 2)(hisi_pwm_writel(hisLpwm, period_ns, PWM_CFG0);printk(KERN_CRIT period reg have be written.An);)/hisi_pwm_writel(hisi_pwm, Oxa, PWM_CFG2);printk(KERN_CRIT num reg have be written.An);/val = hisi_pwm_readl(hisi_pwm, PWM_CTRL);/v
17、al &二 OxFFFE;/hisi_pwm_writel(hisi_pwm, val, PWM_CTRL);val = hisi_pwm_readl(hisi_pwm, PWM_CTRL);val |= 0 x05;hisi_pwm_writel(hisi_pwm, val, PWM_CTRL);spin_unlock(&hisi_pwm-ctrl_lock);clk_disable_unprepare(hisLpwm-clk);return 0;)static int hisi_pwm_set_polarity(struct pwm_chip *chip, struct pwm_devic
18、e *pwm, enum pwm_polarity polarity)(struct hisi_pwm_chip *hisi_pwm = to_hisi_pwm_chip(chip);u32 val;int ret;ret = clk_prepare_enable(hisi_pwm-clk);if (ret) dev_err(chip-dev, failed to enable PWM clockn);return ret;spin_lock(&hisi_pwm-ctrl_lock);val = hisLpwm_readl(hisLpwm, PWM_CTRL);if (polarity !=
19、PWM_POLARITY_NORMAL)val |= 0 x02;elseval &二 OxFFFD;hisLpwm_writel(hisi_pwm, val, PWM_CTRL);spin_unlock(&hisi_pwm-ctrlock);clk_disable_unprepare(hisi_pwm-clk);return 0;)static int hisi_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)(struct hisi_pwm_chip *hisi_pwm = to_hisi_pwm_chip(chip);u3
20、2 val;int ret;ret = clk_prepare_enable(hisi_pwm-clk);if (ret) dev_err(chip-dev, failed to enable PWM clockn); return ret;spin_lock(&hisLpwm-ctrl_lock);val = hisi_pwm_readl(hisi_pwm, PWM_CTRL);val |= 0 x05;hisi_pwm_writel(hisi_pwm, val, PWM_CTRL);spin_unlock(&hisi_pwm-ctrl_lock);return 0;)static void
21、 hisi_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)struct hisi_pwm_chip *hisi_pwm = to_hisi_pwm_chip(chip);u32 val;spinjock(&hisi_pwm-ctrl_lock);val = hisi_pwm_readl(hisi_pwm, PWM_CTRL);val &二 OxFFFE;hisLpwm_writel(hisi_pwm, val, PWM_CTRL);spin_unlock(&hisi_pwm-ctrl_lock);clk_disable_un
22、prepare(hisi_pwm-clk); )static const struct pwm_ops hisi_pwm_ops = .config = hisi_pwm_config, ,set_polarity = hisi_pwm_set_polarity, .enable = hisi_pwm_enable, .disable = hisi_pwm_disable, .owner = THIS_MODULE,);static const struct hisi_pwm_data hisi_pwm_data_l = /.has_prescaler_bypass = true, /.has
23、_rdy = true, ,npwm = 1,);static const struct of_device_id hisi_pwm_of_match = patible = hisilicon,hi-pwm, .data = &hisi_pwm_data_l, ();MODULE_DEVICE_TABLE(of, hisi_pwm_of_match);static int hisi_pwm_probe(struct platform_device *pdev) (struct hisi_pwm_chip *pwm;struct resource *res;int ret;const stru
24、ct of_device_id *match;match = of_match_device(hisLpwm_of_match, &pdev-dev);pwm = devm_kzalloc(&pdev-dev, sizeof(*pwm), GFP_KERNEL); if (!pwm)return -ENOMEM;res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pwm-base = devm_ioremap_resource(&pdev-dev, res);if (IS_ERR(pwm-base)return PTR_ERR(pwm-b
25、ase);pwm-clk = devm_clk_get(&pdev-dev, NULL);if (IS_ERR(pwm-clk)return PTR_ERR(pwm-clk);pwm-data = match-data;pwm-chip.dev = &pdev-dev;pwm-chip.ops = &hisi_pwm_ops;pwm-chip.base = -1;pwm-chip.npwm = pwm-data-npwm;pwm-chip.can_sleep = true;/pwm-chip.of_xlate = of_pwm_xlate_with_flags;/pwm-chip.of_pwm
26、_n_cells = 3;spin_lock_init(&pwm-ctrl_lock);ret = pwmchip_add(&pwm-chip);if (ret dev, failed to add PWM chip: %dn, ret); return ret;platform_set_drvdata(pdev, pwm);return 0;/clk_error:/ pwmchip_remove(&pwm-chip);/ return ret;)static int hisi_pwm_remove(struct platform_device *pdev)(struct hisi_pwm_c
27、hip *pwm = p I a tf o r m_g et_d rvd a ta (p d e v);return pwmchip_remove(&pwm-chip);static struct platform_driver hisi_pwm_driver = .driver = .name = hisi-pwm,.of_match_table = hisi_pwm_of_match,).,probe = hisi_pwm_probe,.remove = hisi_pwm_remove,);module_platform_driver(hisLpwm_driver);/ 宏展開為驅動入口M
28、ODULE_ALIAS(platform:hisi-pwm);MODULE_AUTHOR(zjh );MODULE_DESCRIPTION(zd hisi3559a PWM driver);MODULE_LICENSE(GPL v2);4.時鐘驅動修改在hi3559avl00-clock.h最后增加如下定義/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/ add by zjh/
29、add by zjh/ add by zjh/ add by zjh/ add by zjh#define HI3559AV100_SHUB_PWM2_CLK#define HI3559AV100_SHUB_PWM3_CLK#define HI3559AV100_SHUB_PWM6_CLK#define HI3559AV100_SHUB_PWM7_CLK修改clk-hi3559avl00.c文件內容add by zjh為修改內容/* shub div elk */struct clk_div_table shub_spi_clk_table = 0, 8,1, 4,2, 2;struct cl
30、k_div_table shub_spi4_clk_table = 0, 8,1, 4,2, 2,3, 1;struct clk_div_table shub_uart_div_clk_tableQ = 1, 8,2, 4;struct clk_div_table shub_pwm_clk_table = 0, 64,1, 8,2, 4,3, 2,4, l;/add by zjh struct hisi_divider_clock hi3559avl00_shub_div_clks _initdata = HI3559AV100_SHUB_SPI_SOURCE_CLK, clk_spi_clk
31、, shub_clk, 0, 0 x20, 24, 2, CLK_DIVIDER_ALLOW_ZERO, shub_spi_clk_table, HI3559AV100 SHUB UART DIV CLK, elk uart div elk, shub elk, 0, Oxlc, 28, 2, CLK DIVIDER ALLOW ZERO, shub uart div elk table, HI3559AV100_SHUB_PWM_SOURCE_CLK, clk_pwm_clk, shub_clk, 0, 0 x18, 8, 3, CLK_DIVIDER_ALLOW_ZERO, shub_pw
32、m_clk_table,/ add by zjh );/* shub gate elk */static struct hisi_gate_clock hi3559avl00_shub_gate_clks _initdata = HI3559AV100_SHUB_SPI0_CLK , clk_shub_spiO, clk_spLclk,0, 0 x20, 1, 0, HI3559AV100_SHUB_SPIl_CLK , clk_shub_spil, clk-SpLcIk,0, 0 x20, 5, 0, HI3559AV100_SHUB_SPI2_CLK , clk_shub_spi2, clk_spLclk,0, 0 x20, 9, 0,shu b_u a rt_so u rce_clk, shub_uart_source_clk, shu b_u a rt_source_clk, shu b_u a rt_so u rce_clk, shub_uart_sour
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 山地自行車生產建設項目可行性研究報告
- 2025年正話梅項目投資可行性研究分析報告
- 2020-2025年中國提花織物行業市場運營現狀及行業發展趨勢報告
- 間氟苯腈行業行業發展趨勢及投資戰略研究分析報告
- 2025年股權轉讓可行性分析報告
- 仿絲女旗袍行業市場發展及發展趨勢與投資戰略研究報告
- 2025-2030年中國鑄板機行業深度研究分析報告
- 2024-2025年中國金融系統安防行業發展趨勢預測及投資戰略咨詢報告
- 羅紋平腳褲行業行業發展趨勢及投資戰略研究分析報告
- 2025年建筑模板脫模涂料行業深度研究分析報告
- 信訪工作課件
- 安全生產的科技創新與成果轉化應用
- 過氧乙酸消毒濃度及方法
- 王洪圖黃帝內經80課時講稿
- 英語課堂游戲PPT-英語游戲4個PPT-(切西瓜-打地鼠-開火車-植物大戰僵尸)
- 大學物理光學總結-大學物理光學知識點總結課件
- 關于領導干部報告?zhèn)€人有關事項的規定全文
- 個人借條電子版模板
- 物業公司特色服務、日常增值服務項目供參考
- 創新創業實務PPT全套完整教學課件
- 工業企業電源快速切換裝置設計配置導則
評論
0/150
提交評論