v200r010c00配置指南-網絡管理與監控0106ipca

iPCA配網絡包守恒算法iPCA（PacketConservationAlgorithmforInternet）是一種IP網絡性能統說明iPCA定網絡包守恒算法iPCA（PacketConservationAlgorithmforInternet）是一種IP網絡性能統目在絡化，越業過傳有務包的，如語務了斷中出丟以哪生包.71和NQ（ewrkQay yss）出了。但種技術在際應用存在以問lY.1731lY.1731和NQA都是間接測量技術，通過對構造報文（如仿真流或者插入流）的統計lY.1731和NQA都不支持跨網絡層端到端組網，在IP網絡中存在多路徑情況 相關信息

技術

iPCA技術：智能感知網絡質量使用iPCA實現網絡級丟包統計 l區域網絡丟包統計：統計中不包含邊界設備的丟包統計（目標流穿越網絡未包含l逐點丟包統計：對網絡中的設備進行逐點丟包統計，當用戶希望準確定位發生丟端到端網絡丟包統計In-PIn-Point/Ingress

Switch_目標流穿越網絡Switch_

Out-Point/ESwitch_Out-Point/ESwitch_目標流區域網絡丟包統計絡的性能情況，在企業分支和總部網絡出口處的設備上配置iPCA功能，所有出口企業逐點丟包統計

目標流傳輸網

目標目標邏輯接口使用iPCA實現設備級丟包統計 設備間直連鏈路丟包統計 接收的報文設備整體丟包統計染色位 15 31TypeTotalFragmentTimetoHeaderSourceDestination 說明在244vifretaedeic）6（位～位（Soden）位（位、7位～位， 使用命令iplpmloss-measurecolor-flag配置設備級丟包統計功能的染色位。網絡級丟包統計模型網絡級丟包統計基于IPFPM（IPFlowPerformanceMeasurement）實現。IPFPM是一種6-8IPFPM

目標

網絡中的業務報文是IPFPM統計的目標對象，被稱為目標流。網絡級丟包統計的目的字描目標流穿越網絡 統計系統

In-Point/IngressIn-Point/IngressTLP2In-Point/IngressIn-Point/Ingress

Out-Point/EgressOut-Point/Egress 色，那么該TLP被稱為In-Point/IngressTLP；如果該TLP是其下游統計點，即發送報文且去除報文指定字段的染色，那么該TLP被稱為Out-Point/EgressTLP。 測量控制點機或者位于中心的一立設備），負責完成收集DCP上送的統計數據，對統計數據進行匯總和計算，向用戶終端或者系統上報統計結果。同一臺網絡企業網絡中往往存在多個不同的業務流，比如語音流和流等，這些流量往往都經統計過程

目標流

網絡級丟包統計原理流量之間的差，獲得丟包數量和丟包率數據。以圖6-11所示的網絡為例，從網絡設備PI2

Egress 分組測量法來實現丟包統計。所謂特征分組測量法是指在源端報文處，對業務報說明能該功能。用戶也可以自定義測量區間的時間范圍，取值可以是或者分鐘。缺省情測量周期的范圍用戶也可以自定義，取值可以是或者秒。缺省情況下為秒以圖6-1wc_1wch2Swc_2Sh_3圖6-1所示的是n～n+4（≦4）00000111101111100000111110000001111011111000001111101010

011111011111

01111000011110000

01 0

1111

t3lt0時刻：Switch_1對業務報文的染色位置1，計數器開始計數本周期內發送的染lt1時刻：Switch_2對業務報文的染色位置1，計數器開始計數本周期內發送的染lt2時刻：經過網絡轉發及延遲后，Switch_2lt3時刻：經過網絡轉發及延遲后，Switch_3lt4時刻：Switch_1對本測量周期內染色位置1的業務報文計數結束，得到本周期lt5時刻：Switch_2對本測量周期內染色位置1的業務報文計數結束，得到本周期lt6時刻：Switch_2對本測量周期內所有染色位置1的業務報文計數結束，得到本周期lt7時刻：Switch_3對本測量周期內所有染色位置1的業務報文計數結束，得到本周期說明性。有關NTP的具體內容請參見《S1720&S2700&S5700&S6720V200R010C00配置指南-設備管理》NTP配置。設備級丟包統計設備級丟包統計基于IPLPM（IPLocalPerformanceMeasurement）實現。IPLPM是一量等性能指標數據的統計方法。與IPFPM不同，IPLPM統計的對象（目標流）用戶無設備間直連鏈路丟包統計

設備整體丟包統計

接收的報文 配置任務概覽如圖6-15所示，企業分支用戶和總部用戶在使用會議業務 B1 C2 iPCA的場景與配置任務的關系如表6-2場描任如果用戶發現會議存在花屏、語音延遲等現象時，希望網絡丟 6.7配置iPCA實現網絡級6.7配置iPCA實現網絡級場描任可以在交換機S2或核配置注意事項涉及網元

License

版本支持

說明特性依賴和限制 l不支持在MPLS場景中配置網絡級逐點丟包統計功能l網絡級丟包統計基于目標流，如果在網絡轉發過程中修改了報文內容（如NAT轉參缺省10參缺省10配置 實現網絡級端到端和區域網絡丟包統背景信息并向用戶終端或系統上報統計結果。

前置任務

V200R010C00配置指南-設備管理》NTP配置。配置流程

配置DCP和6.7.2配置MCP之間并無嚴格的配置順序上的限制，但是在配置時需背景信息

操作步驟

步驟1執行命令system-view步驟2執行命令nqaipfpmdcp，使能全局的DCP功能，并進入IPFPM-DCP步驟3執行命令dcpiddcp-id，配置DCP步驟4（可選）執行命令authentication-modehmac-sha256key-idkey-idcipherpassword，步驟5執行命令color-flagloss-measuretos-bittos-bit|flags-bit0}，配置網絡級丟包統計使用說明段的前6位（0位～5位）用作區分服務代碼點DSCP（DSCodePoint），當需要使用DS字段提供步驟6執行命令mcpmcp-id[portport-number][ -instance-instance-name|net- 本設備上通過命令mcpid配置的MCP標識進行對比： 步驟7配置DCP執行命令instanceinstance-id，創建統計實例，并進入IPFPM-DCP實例視圖。（可選）執行命令authentication-modehmac-sha256key-idkey-idcipher執行命令mcpmcp-id[portport-number][ -instance-instance-name|net- UDP端是65030。如果沒有配置統計實例所屬的MCP標識，則采用步驟6在標識跟本設備上通過命令mcpid配置的MCP標識進行對比： flow{forward|backward}{protocol{tcp|udp}{source-portsrc-port-number1[tosrc-port-number2]|destination-portdest-port-number1[todest-port-number2]}*|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}* flow{forward|backward}{protocolprotocol-number|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}* flowbidirectional{protocol{tcp|udp}{source-portsrc-port-number1[tosrc-port-number2]|destination-portdest-port-number1[todest-port-number2]}*|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}* flowbidirectional{protocolprotocol-number|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}*說明說明MCP上統計狀態不正確，此時需要在IPFPM-MCP實例視圖下先執行命令measuredisable去使能統計功能，然后再執行命令measureenable使能統計功能。執行命令tlptlp-idin-point|out-pointingress|egress}，配置統計實例的測量目標邏輯端口TLP（TargetLogicalPort）在統計系統中負責統計動作的執行和統計步驟8執行命令quit，退回IPFPM-DCP步驟9執行命令quit步驟10配置接口與TLP說明步驟11執行命令quit步驟12能故障的網絡節點時，執行命令loss-measureenable[time-rangetime-range]，使能按需的丟包統計功能。執行命令loss-measureenablecontinual，使能連續的丟包統計功能。----結束背景信息

或者系統發送丟包統計結果，一般情況下由中心的專門設備承擔或者由網絡說明操作步驟

步驟1執行命令system-view步驟2執行命令nqaipfpmmcp，使能全局的MCP功能，并進入IPFPM-MCP步驟3執行命令mcpidmcp-id，配置MCPD可達的MDMD從L。步驟4（可選）執行命令protocoludpportport-number，配置MCP上的UDP端，即MCP步驟5（可選）執行命令authentication-modehmac-sha256key-idkey-idcipherpassword，步驟6配置MCP執行命令loss-measureratio-thresholdupper-limitupper-limitlower-limitlower-MCP在DCP配置更改期間會收到錯誤數據，此時使用measuredisable命令可以去使能MCP某統計實例的統計功能，等DCP配置更改完成后再使用undomeasuredisable命令或measureenable命令使能統計實例的統計功能。----結束檢查配置結果前提條件操作步驟

在MCP上執行disyipfpmstatistic-typelossinstanceinstance-id命令查看指定統 在MCP上執行disypmmeasure-info[instance-typeinstance-type]命令查看性能 在DCP上執行disyipfpmdcp命令查看DCP上的配置信息和支持的統計實例數等----結束配置iPCA實現網絡級逐點丟包統計背景信息

說明

目標流傳輸網

目標目標邏輯接口前置任務

V200R010C00配置指南-設備管理》NTP配置。配置流程

背景信息

操作步驟

步驟1執行命令system-view步驟2執行命令nqaipfpmdcp，使能全局的DCP功能，并進入IPFPM-DCP步驟3執行命令dcpiddcp-id，配置DCP步驟4（可選）執行命令authentication-modehmac-sha256key-idkey-idcipherpassword，步驟5（可選）執行命令color-flagloss-measuretos-bittos-bit|flags-bit0}，配置網絡級丟包說明段的前6位（0～5位）用作區分服務代碼點DSCP（DSCodePoint），當需要使用DS字段提供差步驟6執行命令mcpmcp-id[portport-number][ -instance-instance-name|net- 本設備上通過命令mcpid配置的MCP標識進行對比： 步驟7配置DCP執行命令instanceinstance-id，創建統計實例，并進入IPFPM-DCP實例視圖。（可選）執行命令authentication-modehmac-sha256key-idkey-idcipher執行命令mcpmcp-id[portport-number][ -instance-instance-name|net- UDP端是65030。如果沒有配置統計實例所屬的MCP標識，則采用步驟6在標識跟本設備上通過命令mcpid配置的MCP標識進行對比： flow{forward|backward}{protocol{tcp|udp}{source-portsrc-port-number1[tosrc-port-number2]|destination-portdest-port-number1[todest-port-number2]}*|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}* flow{forward|backward}{protocolprotocol-number|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}* flowbidirectional{protocol{tcp|udp}{source-portsrc-port-number1[tosrc-port-number2]|destination-portdest-port-number1[todest-port-number2]}*|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}* flowbidirectional{protocolprotocol-number|dscpdscp-value|sourcesrc-ip-address[src-mask-length]|destinationdest-ip-address[dest-mask-length]}*說明說明MCP上統計狀態不正確，此時需要在IPFPM-MCP實例視圖下先執行命令measuredisable去使能統計功能，然后再執行命令measureenable使能統計功能。執行命令tlptlp-idin-point|out-pointingress|egress}，配置IPFPM統計執行命令tlptlp-idmid-pointflowforward|backward|bidirectional{說明步驟8執行命令quit，退回IPFPM-DCP步驟9執行命令quit步驟10配置接口與TLP說明步驟11執行命令quit步驟12執行命令loss-measureenablemid-pointtime-rangetime-range]，使能按需的----結束背景信息或者系統發送丟包統計結果，一般情況下由中心的專門設備承擔或者由網絡說明操作步驟

步驟1執行命令system-view步驟2執行命令nqaipfpmmcp，使能全局的MCP功能，并進入IPFPM-MCP步驟3執行命令mcpidmcp-id，配置MCPD可達的MDMD從L。步驟4（可選）執行命令protocoludpportport-number，配置MCP上的UDP端，即MCP步驟5（可選）執行命令authentication-modehmac-sha256key-idkey-idcipherpassword，步驟6配置MCP執行命令instanceinstance-id，創建統計實例，并進入IPFPM-MCP實例視圖。根據ACH的劃分原則，可以將圖6-17所示的組網劃分為2個ACH，分別為ACH1：{}{} 執行命令flowforward|backward}，配置進行逐點統計功能的目標流的方執行命令loss-measureratio-thresholdupper-limitupper-limitlower-limitlower-MCP在DCP配置更改期間會收到錯誤數據，此時使用measuredisable命令可以去使能MCP某統計實例的統計功能，等DCP配置更改完成后再使用undomeasuredisable命令或measureenable命令使能統計實例的統計功能。----結束檢查配置結果前提條件操作步驟

在MCP上執行disyipfpmstatistic-typelossinstanceinstance-id[achach-id]命令 在MCP上執行disypmmeasure-info[instance-typeinstance-type]命令查看性能 在DCP上執行disyipfpmdcp命令查看DCP上的配置信息和支持的統計實例數等----結束配置iPCA前置任務 V200R010C00配置指南-設備管理》NTP配置。配置流程

6.9.2配置iPCA實現設備整體的丟包統計和6.9.1配置iPCA實現設備間直連鏈路的丟包配置iPCA實現設備間直連鏈路的丟包統計背景信息

接收的報文操作步驟

步驟1執行命令system-view步驟2執行命令iplpmloss-measurecolor-flagtos-bittos-bit|flags-bit0}，配置設備級丟包統說明步驟3執行命令interfaceinterface-typeinterface-name步驟4執行命令iplpmlinkloss-measureintervalinterval，配置設備間直連鏈路丟包統計的統步驟5（可選）執行命令iplpmlinkauthentication-modehmac-sha256key-idkey-idcipher步驟6（可選）執行命令iplpmlinkloss-measurealarmenable，使能設備間直連鏈路丟包統步驟7執行命令iplpmlinkloss-measureenable，使能設備間直連鏈路的丟包統計功能。----結束檢查配置結果

執行disyiplpmconfigurationbrief命令，查看設備上設備級丟包統計的簡要配 執行disyiplpmloss-measurestatisticshistory-recordinterfaceinterface-type配置iPCA實現設備整體的丟包統計背景信息操作步驟

步驟1執行命令system-view步驟2執行命令iplpmloss-measurecolor-flagtos-bittos-bit|flags-bit0}，配置設備級丟包統說明步驟3執行命令iplpmgloballoss-measureintervalinterval，配置設備整體丟包統計的統計周步驟4（可選）執行命令iplpmgloballoss-measurealarmenable，使能設備整體丟包統計的步驟5執行命令iplpmgloballoss-measureenable，使能設備整體丟包統計功能。----結束檢查配置結果

執行disyiplpmconfigurationbrief命令，查看設備上設備級丟包統計的簡要配 執行disyiplpmloss-measurestatisticsglobal命令，查看設備整體的丟包統計結 執行disyiplpmloss-measurestatisticshistory-recordglobal命令，查看設備整體配置iPCA實現端到端網絡的丟包統計示例組網需求

終終終企業分企業總反向配置思路IngressTLP進行綁定。DCP1上定義統計實例1匯總TLP收集到的目標流統計數據。EgressTLP進行綁定。DCP2上定義統計實例1匯總TLP收集到的目標流統計數據。說明操作步驟<[>system-]sysname[Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-dcp]dcpid1.1.1.1[Switch_1-nqa-ipfpm-dcp]<[>system-]sysname[Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-dcp]dcpid1.1.1.1[Switch_1-nqa-ipfpm-dcp]instance1[Switch_1-nqa-ipfpm-dcp-instance-1][Switch_1-nqa-ipfpm-dcp-instance-1]mcp[Switch_1-nqa-ipfpm-dcp-instance-1]flowbidirectionalsource10.1.1.024destination10.2.1.024[Switch_1-nqa-ipfpm-dcp-instance-1]tlp1in-pointingress[Switch_1-nqa-ipfpm-dcp]quit[Switch_1]interfacegigabitethernet0/0/1[Switch_1-GigabitEthernet0/0/1]ipfpmtlp1[Switch_1-GigabitEthernet0/0/1]quit[Switch_1]nqaipfpmdcp[Switch_1-nqa-ipfpm-dcp]instance[Switch_1-nqa-ipfpm-dcp-instance-1]loss-measureenablecontinual[Switch_1-nqa-ipfpm-dcp-instance-1]quit[Switch_1-nqa-ipfpm-dcp]<[>system-]sysname[Switch_2]nqaipfpm[Switch_2-nqa-ipfpm-dcp]dcpid2.2.2.2[Switch_2-nqa-ipfpm-dcp]<[>system-]sysname[Switch_2]nqaipfpm[Switch_2-nqa-ipfpm-dcp]dcpid2.2.2.2[Switch_2-nqa-ipfpm-dcp]instance1[Switch_2-nqa-ipfpm-dcp-instance-1]mcp[Switch_2-nqa-ipfpm-dcp-instance-1]flowbidirectionalsource10.1.1.024destination10.2.1.024[Switch_2-nqa-ipfpm-dcp-instance-1]tlp2out-pointegress[Switch_2-nqa-ipfpm-dcp-instance-1]quit[Switch_2-nqa-ipfpm-dcp]quit[Switch_2]interfacegigabitethernet0/0/1[Switch_2-GigabitEthernet0/0/1]ipfpmtlp2[Switch_2-GigabitEthernet0/0/1]quit[Switch_2]nqaipfpmdcp[Switch_2-nqa-ipfpm-dcp]instance[Switch_2-nqa-ipfpm-dcp-instance-1]loss-measureenablecontinual[Switch_2-nqa-ipfpm-dcp-instance-1]quit[Switch_2-nqa-ipfpm-dcp]步驟3配置Switch_2作為MCP[Switch_2][Switch_2]nqaipfpm[Switch_2-nqa-ipfpm-mcp]mcpid2.2.2.2[Switch_2-nqa-ipfpm-mcp]instance1[Switch_2-nqa-ipfpm-mcp-instance-1]dcp[Switch_2-nqa-ipfpm-mcp-instance-1]dcp[Switch_2-nqa-ipfpm-mcp-instance-1]loss-measureratio-thresholdupper-limit7lower-limit5[Switch_2-nqa-ipfpm-mcp-instance-1]quit[Switch_2]quit步驟4#在作為MCP的Switch_2上執行disyipfpmstatistic-typelossinstance1命令查看丟包<Switch_2>disyipfpmstatistic-typelossinstanceLatestlossstatisticsofforwardUnit:p-packet,b-LossRatio(p) LatestlossstatisticsofbackwardUnit:p-packet,b-LossRatio(p)----結束配置文件

##interfaceGigabitEthernet0/0/1ipfpmtlp1#nqaipfpmdcpinstancemcpflowbidirectionalsource10.1.1.024destination10.2.1.024tlp1in-pointingressloss-measureenable# ##ipfpmtlp2#nqaipfpmdcpinstancemcpflowbidirectionalsource10.1.1.024destination10.2.1.024tlp2out-pointegressloss-measureenable#nqaipfpmmcpinstancedcpdcploss-measureratio-thresholdupper-limit7.000000lower-limit#相關信息技術iPCA--更敏捷地實現網絡精準管理iPCA技術：智能感知網絡質量配置iPCA實現區域網絡的丟包統計示例組網需求

中中心設出口廣域網專線企業分支出口設企業出口目標企業分支配置思路

wh_Swc_2DE0/01D的u-ontngessTLwh_1wch2D，分1L的In-PointEgressTLP進行綁定。Switch_3作為DCP定義統計實例1其TLP收集到的企業總部中心的交換機Switch_4作為MCP，收集并匯總各個DCP收集到的統說明操作步驟<[>system-]sysname[Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-dcp]dcpid1.1.1.1[Switch_1-nqa-ipfpm-dcp]<[>system-]sysname[Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-dcp]dcpid1.1.1.1[Switch_1-nqa-ipfpm-dcp]instance1[Switch_1-nqa-ipfpm-dcp-instance-1]mcp[Switch_1-nqa-ipfpm-dcp-instance-1]flowforwardsource10.1.1.024destination10.2.0.0[Switch_1-nqa-ipfpm-dcp-instance-1][Switch_1-nqa-ipfpm-dcp-instance-1]tlp1out-pointingress[Switch_1-nqa-ipfpm-dcp-instance-1]quit[Switch_1-nqa-ipfpm-dcp][Switch_1]interfacegigabitethernet0/0/1[Switch_1-GigabitEthernet0/0/1]ipfpmtlp1[Switch_1-GigabitEthernet0/0/1]quit[Switch_1]nqaipfpmdcp[Switch_1-nqa-ipfpm-dcp]instance[Switch_1-nqa-ipfpm-dcp-instance-1]loss-measureenablecontinual[Switch_1-nqa-ipfpm-dcp-instance-1]quit[Switch_1-nqa-ipfpm-dcp]步驟2配置Switch_2作為DCP2，2.2.2.2為Switch_2的RouterID，其測量點TLP的編號為2<<[>system-]sysname[Switch_2]nqaipfpm[Switch_2-nqa-ipfpm-dcp]dcpid2.2.2.2[Switch_2-nqa-ipfpm-dcp]instance1[Switch_2-nqa-ipfpm-dcp-instance-1]mcp[Switch_2-nqa-ipfpm-dcp-instance-1]flowforwardsource10.1.1.024destination10.2.0.016[Switch_2-nqa-ipfpm-dcp-instance-1]tlp2out-pointingress[Switch_2-nqa-ipfpm-dcp-instance-1]quit[Switch_2-nqa-ipfpm-dcp]quit[Switch_2]interfacegigabitethernet0/0/1[Switch_2-GigabitEthernet0/0/1]ipfpmtlp2[Switch_2-GigabitEthernet0/0/1]quit[Switch_2]nqaipfpmdcp[Switch_2-nqa-ipfpm-dcp]instance[Switch_2-nqa-ipfpm-dcp-instance-1]loss-measureenablecontinual[Switch_2-nqa-ipfpm-dcp-instance-1]quit[Switch_2-nqa-ipfpm-dcp]步驟3配置Switch_3作為DCP3，3.3.3.3為Switch_3的RouterID，其測量點TLP的編號為3<<[>system-]sysname[Switch_3]nqaipfpm[Switch_3-nqa-ipfpm-dcp]dcpid3.3.3.3[Switch_3-nqa-ipfpm-dcp]instance1[Switch_3-nqa-ipfpm-dcp-instance-1]mcp[Switch_3-nqa-ipfpm-dcp-instance-1]flowforwardsource10.1.1.024destination10.2.0.016[Switch_3-nqa-ipfpm-dcp-instance-1]tlp3in-pointegress[Switch_3-nqa-ipfpm-dcp-instance-1]quit[Switch_3-nqa-ipfpm-dcp]quit[Switch_3]interfacegigabitethernet0/0/1[Switch_3-GigabitEthernet0/0/1]ipfpmtlp3[Switch_3-GigabitEthernet0/0/1]quit[Switch_3]nqaipfpmdcp[Switch_3-nqa-ipfpm-dcp]instance[Switch_3-nqa-ipfpm-dcp-instance-1]loss-measureenablecontinual[Switch_3-nqa-ipfpm-dcp-instance-1]quit[Switch_3-nqa-ipfpm-dcp]步驟4配置Switch_4作為MCP，4.4.4.4為Switch_4的RouterID<<[>system-]sysname[Switch_4]nqaipfpm[Switch_4-nqa-ipfpm-mcp]mcpid4.4.4.4[Switch_4-nqa-ipfpm-mcp]instance1[Switch_4-nqa-ipfpm-mcp-instance-1]dcp[Switch_4-nqa-ipfpm-mcp-instance-1]dcp[Switch_4-nqa-ipfpm-mcp-instance-1]dcp[Switch_4-nqa-ipfpm-mcp-instance-1]loss-measureratio-thresholdupper-limit5lower-limit3[Switch_4-nqa-ipfpm-mcp-instance-1]quit[Switch_4-nqa-ipfpm-mcp]quit[Switch_4]quit步驟5#在作為MCP的Switch_4上執行disyipfpmstatistic-typelossinstance1查看丟包統計<Switch_4>disyipfpmstatistic-typelossinstanceLatestlossstatisticsofforwardflow:Unit:p-packet,b-byte Latestlossstatisticsofbackwardflow:Unit:p-packet,b-byte----結束配置文件

##interfaceGigabitEthernet0/0/1ipfpmtlp1#nqaipfpmdcpinstancemcpflowforwardsource10.1.1.024destination10.2.0.016tlp1out-pointingressloss-measureenable# ##ipfpmtlp2##nqaipfpmdcpinstancemcpflowforwardsource10.1.1.024destination10.2.0.016tlp2out-pointingressloss-measureenable# ##interfaceGigabitEthernet0/0/1ipfpmtlp3#nqaipfpmdcpinstancemcpflowforwardsource10.1.1.024destination10.2.0.016tlp3in-pointegressloss-measureenable# ##nqaipfpmmcpinstancedcpdcpdcploss-measureratio-thresholdupper-limit5.000000lower-limit#相關信息技術iPCA--更敏捷地實現網絡精準管理iPCA技術：智能感知網絡質量配置iPCA實現逐點丟包統計示例組網需求

企業分終端

GE0/0/1Mid-point

企業總終端目標邏輯接口配置思路段定位故障的目的。按照原子閉合跳ACH（AtomicClosedHop）的劃分規則，可以將Switch_1到Switch_3之間的鏈路劃分為兩個ACH，分別為ACH1：TLP100，TLP200}和ACH2：{TLP200，TLP310}。在Switch_1上配置觸發IPFPM丟包超限告警和丟包超限恢復告警的丟包率上限閾值和下限閾值，使得Switch_1能夠根據網絡的丟包情況向發送告警，實時通說明操作步驟步驟1配置Switch_1作為MCP，1.1.1.1為Switch_1的RouterID<<[>system-]sysname[Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-mcp]mcpid1.1.1.1[Switch_1-nqa-ipfpm-mcp]instance1[Switch_1-nqa-ipfpm-mcp-instance-1]dcp[Switch_1-nqa-ipfpm-mcp-instance-1]dcp[Switch_1-nqa-ipfpm-mcp-instance-1]dcp[Switch_1-nqa-ipfpm-mcp-instance-1]loss-measureratio-thresholdupper-limit7lower-limit5[Switch_1-nqa-ipfpm-mcp-instance-1]ach1[Switch_1-nqa-ipfpm-mcp-instance-1-ach-1]flow[Switch_1-nqa-ipfpm-mcp-instance-1-ach-1][Switch_1-nqa-ipfpm-mcp-instance-1-ach-1]in-groupdcp1.1.1.1tlp[Switch_1-nqa-ipfpm-mcp-instance-1-ach-1]out-groupdcp2.2.2.2tlp200[Switch_1-nqa-ipfpm-mcp-instance-1-ach-1]quit[Switch_1-nqa-ipfpm-mcp-instance-1]ach[Switch_1-nqa-ipfpm-mcp-instance-1-ach-2]flow[Switch_1-nqa-ipfpm-mcp-instance-1-ach-2]in-groupdcp2.2.2.2tlp[Switch_1-nqa-ipfpm-mcp-instance-1-ach-2]out-groupdcp3.3.3.3tlp310[Switch_1-nqa-ipfpm-mcp-instance-1-ach-2]quit[Switch_1-nqa-ipfpm-mcp]quit[Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-dcp]dcpid1.1.1.1[Switch_1-nqa-ipfpm-dcp]instance1[Switch_1-nqa-ipfpm-dcp-instance-1][Switch_1]nqaipfpm[Switch_1-nqa-ipfpm-dcp]dcpid1.1.1.1[Switch_1-nqa-ipfpm-dcp]instance1[Switch_1-nqa-ipfpm-dcp-instance-1]mcp[Switch_1-nqa-ipfpm-dcp-instance-1]flowforwardsource10.1.1.024destination10.2.1.024[Switch_1-nqa-ipfpm-dcp-instance-1]tlp100in-pointingress[Switch_1-nqa-ipfpm-dcp-instance-1]quit[Switch_1-nqa-ipfpm-dcp]quit[Switch_1]interfacegigabitethernet0/0/1[Switch_1-GigabitEthernet0/0/1]ipfpmtlp100[Switch_1-GigabitEthernet0/0/1]quit[Switch_1]nqaipfpmdcp[Switch_1-nqa-ipfpm-dcp]instance[Switch_1-nqa-ipfpm-dcp-instance-1]loss-measureenabletime-range30[Switch_1-nqa-ipfpm-dcp-instance-1]quit[Switch_1-nqa-ipfpm-dcp][Switch_1]步驟3配置Switch_2作為DCP2，2.2.2.2為Switch_2的RouterID，其測量點TLP的編號為200<<[>system-]sysname[Switch_2]nqaipfpm[Switch_2-nqa-ipfpm-dcp]dcpid2.2.2.2[Switch_2-nqa-ipfpm-dcp]instance1[Switch_2-nqa-ipfpm-dcp-instance-1]mcp[Switch_2-nqa-ipfpm-dcp-instance-1]flowforwardsource10.1.1.024destination10.2.1.024[Switch_2-nqa-ipfpm-dcp-instance-1]tlp200mid-pointflowforwardingress[Switch_2-nqa-ipfpm-dcp]quit[Switch_2]interfacegigabitethernet0/0/1[Switch_2-GigabitEthernet0/0/1]ipfpmtlp200[Switch_2-GigabitEthernet0/0/1]quit[Switch_2]nqaipfpmdcp[Switch_2-nqa-ipfpm-dcp]instance[Switch_2-nqa-ipfpm-dcp-instance-1]loss-measureenablemid-pointtime-range30[Switch_2-nqa-ipfpm-dcp-instance-1]quit[Switch_2-nqa-ipfpm-dcp]<[>system-]sysname[Switch_3]nqaipfpm[Switch_3-nqa-ipfpm-dcp]dcpid3.3.3.3[Switch_3-nqa-ipfpm-dcp]<[>system-]sysname[Switch_3]nqaipfpm[Switch_3-nqa-ipfpm-dcp]dcpid3.3.3.3[Switch_3-nqa-ipfpm-dcp]instance1[Switch_3-nqa-ipfpm-dcp-instance-1]mcp[Switch_3-nqa-ipfpm-dcp-instance-1]flowforwardsource10.1.1.024destination10.2.1.024[Switch_3-nqa-ipfpm-dcp-instance-1]tlp310out-pointegress[Switch_3-nqa-ipfpm-dcp-instance-1]quit[Switch_3-nqa-ipfpm-dcp]quit[Switch_3]interfacegigabitethernet0/0/1[Switch_3-GigabitEthernet0/0/1]ipfpmtlp310[Switch_3-GigabitEthernet0/0/1]quit[Switch_3]nqaipfpmdcp[Switch_3-nqa-ipfpm-dcp]instance[Switch_3-nqa-ipfpm-dcp-instance-1]loss-measureenabletime-range30[Switch_3-nqa-ipfpm-dcp-instance-1]quit[Switch_3-nqa-ipfpm-dcp]步驟5#在作為MCP的Switch_1上執行disyipfpmstatistic-typelossinstance1ach1和disyipfpmstatistic-typelossinstance1ach2命令查看丟包統計結果。以下僅以ach1的顯示信息為例。通過查看Loss和LossRatio的值，即可判斷ach1存在丟<Switch_1>disyipfpmstatistic-typelossinstance1achLatestlossstatisticsofforwardUnit:p-packet,b-LatestlossstatisticsofbackwardUnit:p-packet,b-----結束配置文件 ##interfaceGigabitEthernet0/0/1ipfpmtlp100#nqaipfpmdcpinstancemcpflowforwardsource10.1.1.024destination10.2.1.024tlp100in-pointingress#nqaipfpmmcpinstancedcpdcpdcploss-measureratio-thresholdupper-limit7.000000lower-limitachflowin-groupdcp1.1.1.1tlpout-groupdcp2.2.2.2tlpachflowin-groupin-groupdcp2.2.2.2tlpout-groupdcp3.3.3.3tlp# ##interfaceGigabitEthernet0/0/1ipfpmtlp200#nqaipfpmdcpinstancemcpflowforwardsource10.1.1.024destinatio