基于ds1302的51單片機簡易實時時鐘1602顯示源程序

1、=主程序=#include #include ds1302.h#include LCD1602.hvoid change();uchar times9;uchar date9;main()LCD_init();/LCD初始化init_1302(time_1302);gotoxy(1,1);LCD_display(Time:);gotoxy(1,2);LCD_display(Date:);times8=0;/date8=0;while(1)get_1302(time_1302);change();gotoxy(7,1);LCD_display(times);gotoxy(7,2);LCD_dis

2、play(date);/*= 轉 換 子 程 序=*/void change() / 時 間 的 轉 換times0=time_13022/10+0;times1=time_13022%10+0;times2=:;times3=time_13021/10+0;times4=time_13021%10+0;times5=:;times6=time_13020/10+0;times7=time_13020%10+0;/ 日 期 的 轉 換date0=time_13026/10+0;date1=time_13026%10+0;date2=-;date3=time_13024/10+0;date4=t

3、ime_13024%10+0;date5=-;date6=time_13023/10+0;date7=time_13023%10+0;=DS1302驅動程序=#define uchar unsigned charuchar time_13027=0x00,0x00,0x00,0x03,0x07,0x03,0x08;/設置時間初始值數組 / 秒 分 時 號 月份 星期 年sbit T_IO=P10; /與硬件相關的連線 clk為DS1302的時鐘信號線sbit T_CLK=P11; /DAT為DS1302的I/O數據線sbit T_RST=P12; /RST為DS1302的RST信號線 ucha

4、r bdata datbyte;sbit datbyte0=datbyte0;sbit datbyte7=datbyte7;void get_1302(uchar time);void write_ds1302(uchar dat);uchar r_1302(uchar add);void w_1302(uchar add,uchar dat);uchar read_ds1302(void);void init_1302(uchar *time);/*= D S 1 3 0 2 初 始 化=*/void init_1302(uchar *time)uchar i, add;/uchar tim

5、e_bcd7;add=0x80;/0寫入，1讀出w_1302(0x8e,0x00);for(i=0;i7;i+)w_1302(add,*time); add+=2; time+; w_1302(0x8e,0x80);/=/ 讀取當前時間/=void get_1302(uchar time)uchar i;uchar add=0x81;w_1302(0x8e,0x00);for(i=0;i7;i+) timei=r_1302(add); add+=2; w_1302(0x8e,0x80); /*= DS1302寫入一個字節（上升沿有效）=*/void write_ds1302(uchar dat

6、)uchar i;datbyte=dat;for(i=0;i1;/*= DS1302讀取一個字節（下降沿有效）=*/uchar read_ds1302(void)uchar i;for(i=0;i1; datbyte7=T_IO; T_CLK=1; T_CLK=0; return(datbyte);/*= 指定位置讀取數據=*/uchar r_1302(uchar add)uchar temp,dat1,dat2;T_RST=0;T_CLK=0;T_RST=1;write_ds1302(add);temp=read_ds1302();T_CLK=1;T_RST=0;dat1=temp/16;d

7、at2=temp%16;temp=dat1*10+dat2;return(temp);/*= 指定位置寫入數據=*/void w_1302(uchar add,uchar dat)T_RST=0;T_CLK=0;T_RST=1;write_ds1302(add);write_ds1302(dat/100;i-) for(j=0;j2;j+);/=寫指令函數=void LCD_write_command(uchar command)LCD_DB=command;LCD_RS=0;/指令LCD_RW=0;/寫入LCD_E=1;LCD_E=0;delay_lcd(1);/等待執行完畢 。/=寫數據函

8、數=void LCD_write_data(uchar dat)LCD_DB=dat;LCD_RS=1;/數據寄存器LCD_RW=0;/寫入數據LCD_E=1;LCD_E=0;delay_lcd(1);/等待程序執行完畢 。/*=顯示一個字符子函數=void LCD_disp_char(uchar x,uchar y, uchar dat) uchar address; if(y=1) address=0x80+x; else address=0xc0+x; LCD_write_command(address); LCD_write_data(dat); =*/=延時1= void delay1(uint x) uint i,j; for(j=0;jx;j+) for(i=0;i100;i+);/=初始化函數=void LCD_init(void)LCD_write_command(0x38);/設置8位格式，2行，5*7LCD_write_command(0x0c);/整體顯示，關光標，不閃爍LCD_write_command(0x06);/設定輸入方式，增量不移位LCD_write_command(0x01);/清屏顯示delay_lcd(200);/=光標定位=void gotoxy(uchar x,uchar y)uchar address; if(y=1) addre