CUDB和PG閏秒調整方案(2015.6.29)

1、 中國移動通信集團廣東有限公司網絡管理中心核網絡維護室CUDB和PG閏秒調整方案中國移動廣東公司網管維護中心核心網絡維護室2015年6月 目錄一、網絡變更簡報41.1網絡變更背景41.2網絡變更內容4二、變更風險點與業務影響評估52.1本次網絡變更的主要風險點52.2本次變更實施人員52.3是否為首次變更52.4前期測試結果52.5業務影響評估52.5.1廠家意見52.5.2變更負責人意見52.6 綜合影響評估62.6.1 計費影響62.6.2 綜資及話務網管影響62.6.3 支撐系統調整62.6.4 性能統計影響62.6.5 業務流程影響62.7 領導決策點6三、操作內容與流程63.1 相關

2、拓?fù)鋱D63.1 操作內容與流程7四、詳細實施步驟84.1 變更前準備84.2 詳細實施步驟9五、測試與驗證方案105.1 驗證方案（定期撥測）105.1 驗證方案（定期指標）10六、應急方案116.1 本次變更可能出現的問題116.2 應急與倒回方案11七、BIBYSITTING監測要求13八、聯系人表13九、備注14一、網絡變更簡報1.1網絡變更背景本次操作是針對新增NGBOSS服務開通主機的靜態路由配置的方案1.2網絡變更內容修改網絡配置 添加和NGBOSS相關的兩條靜態路由變更涉及網元網絡變更內容網絡影響情況變更操作時間業務影響時間業務受影響網元修改PG和CUDB的NTP配置無2015/

3、06/30 00:00 05:00無無二、變更風險點與業務影響評估2.1本次網絡變更的主要風險點序號風險點具體描述變更負責人意見1局?jǐn)?shù)據變更修改NTP服務器啟動配置22.2本次變更實施人員2.3是否為首次變更是2.4前期測試結果修改配置后，觀察設備的性能統計和告警是否正常2.5業務影響評估2.5.1廠家意見預計不會對網絡業務產生不良影響。2.5.2變更負責人意見預計不會對網絡業務產生不良影響。2.6 綜合影響評估2.6.1 計費影響不會對計費產生影響變化。2.6.2 綜資及話務網管影響相關網元信息在綜資和話務網管中不需要更新。2.6.3 支撐系統調整不需要在支撐系統上補充配置，例如億陽主動性能

4、監控、IPNET網管等。2.6.4 性能統計影響不會對網元或網管上的性能統計報表產生影響。2.6.5 業務流程影響不會對業務流程產生變化。2.7 領導決策點序號需要領導決策點具體描述變更負責人意見12三、操作內容與流程3.1 相關拓?fù)鋱D3.1 操作內容與流程序號操作內容實施人實施時間結果確認1修改NTP服務器啟動配置2015/06/30 00:00 2四、詳細實施步驟4.1 變更前準備PG:序號變更準備項實施人配合人實施時間結果確認1設備廠家網元類型序號核查項核查及判定標準備注說明愛立信PG1dvemon status n allCAI3G ports should be E/E on all

5、 PL.MML ports should be E/E on all PL.CLI ports should be D/D on all PL.OAM ports should be E/E on all PL.Application server should be E/E on all PL.Deployment error number should be 0 on all PL.ESA processes should be UP on all the nodes.License server should be UP on both SC.Block proxy should be

6、UP on PL3.Reporter should be UP on all PL.Zookeeper should be UP on both SC and PL-3.EMA愛立信PG2fmacivealarmsThere should be no critical alarms.EMA2檢查PG的proclog，確認各類指令的發放成功率指標檢查，精確到指令級別（ADD_SUB、LST_SUB等）3備份所有GEP3板卡的NTP配置cp /etc/init.d/ntp /etc/init.d/ntp.bak4CUDB:序號變更準備項實施人配合人實施時間結果確認1設備廠家網元類型序號核查項核查及

7、判定標準備注說明愛立信CUDB1cudbSystemStatus(1) The time and date is right,(2)CUDB software version is right, (3)11B:System Monitor threads status on each system controller board are OK; 13B:System Monitor leader and BC Server status are OK.(4)Clusters status on each PL and DS is OK, the memory usage lower than

8、 80% (5) There are 4 NDBs process are running on PL Unit and 2 NDBs process are running on each DS Unit, (6) Replication Channels are OK, 'M': Master, 'Sn': Slave replication channel #n is active. (7)There is no new alarm is printed, more information refer to chapter 2.2.16 (5) MySQL

9、 servers connection are listed as “OK”; (6) CUDB Processes in OAMs, PLs and DSs are listed as “running”;愛立信CUDB2fmacivealarmsThere should be no critical alarms.23備份所有GEP3板卡的NTP配置cp /etc/sysconfig/ntp /etc/sysconfig/ntp.bak44.2 詳細實施步驟步驟要求細化到指令級。PG:序號詳細實施步驟（細化到指令級）實施人配合人實施時間結果確認1登錄PG的第一塊GEP32更改NTP工作模式

10、，修改ntp配置文件sed -i 's/-ng/-xng/g' /etc/init.d/ntp3然后重啟板卡上的ntp服務service ntp restart4在其余板卡重復上述步驟CUDB:序號詳細實施步驟（細化到指令級）實施人配合人實施時間結果確認1登錄CUDB的備用SC2更改NTP工作模式，修改ntp配置文件/etc/sysconfig/ntp，將“NTPD_OPTIONS="-g -u ntp:ntp"”改為“NTPD_OPTIONS="-x -g -u ntp:ntp"sed -i 's/-g -u ntp:ntp /

11、-x -g -u ntp:ntp/g' /etc/sysconfig/ntp3然后重啟板卡上的ntp服務rcntp restart4等2分鐘5登錄CUDB的主用SC6更改NTP工作模式，修改ntp配置文件/etc/sysconfig/ntp，將“NTPD_OPTIONS="-g -u ntp:ntp"”改為“NTPD_OPTIONS="-x -g -u ntp:ntp"sed -i 's/-g -u ntp:ntp /-x -g -u ntp:ntp/g' /etc/sysconfig/ntp7然后重啟板卡上的ntp服務rcntp

12、 restart五、測試與驗證方案5.1 驗證方案（定期撥測）序號撥測內容網元驗證頻度驗證結果驗證人5.1 驗證方案（定期指標）PG：序號指標網元驗證頻度驗證結果驗證人1檢查PG的proclog，確認各類指令的發放成功率指標檢查，精確到指令級別（ADD_SUB、LST_SUB等）cat /var/proclog/raw/proclog* | grep ADD_SUB | grep FAILED | wc -lcat /var/proclog/raw/proclog* | grep ADD_SUB | grep SUCC | wc lPG一次CUDB：序號指標網元驗證頻度驗證結果驗證人1檢查CU

13、DB狀態 cudbSystemStatusCUDB一次六、應急方案6.1 本次變更可能出現的問題系統有可能出現未知的軟件錯誤，對業務發放造成影響。6.2 應急與倒回方案PG:使用備份的NTP配置文件倒回cp /etc/init.d/ntp.bak /etc/init.d/ntp然后重啟NTP服務service ntp restartCUDB:使用備份的NTP配置文件倒回cp /etc/sysconfig/ntp.bak /etc/sysconfig/ntp然后重啟NTP服務rcntp restart七、BIBYSITTING監測要求PG:設備廠家網元類型序號核查項核查及判定標準備注說明愛立信P

14、G1dvemon status n allCAI3G ports should be E/E on all PL.MML ports should be E/E on all PL.CLI ports should be D/D on all PL.OAM ports should be E/E on all PL.Application server should be E/E on all PL.Deployment error number should be 0 on all PL.ESA processes should be UP on all the nodes.License

15、server should be UP on both SC.Block proxy should be UP on PL3.Reporter should be UP on all PL.Zookeeper should be UP on both SC and PL-3.EMA愛立信PG2fmacivealarmsThere should be no critical alarms.EMA愛立信PG15cat /var/proclog/raw/proclog* | grep ADD_SUB | grep FAILED | wc -l確保所有指令的成功率都在正常范圍EMAcat /var/p

16、roclog/raw/proclog* | grep ADD_SUB | grep SUCC | wc lCUDB:設備廠家網元類型序號核查項核查及判定標準備注說明愛立信CUDB1cudbSystemStatus(1) The time and date is right,(2)CUDB software version is right, (3)11B:System Monitor threads status on each system controller board are OK; 13B:System Monitor leader and BC Server status are

17、OK.(4)Clusters status on each PL and DS is OK, the memory usage lower than 80% (5) There are 4 NDBs process are running on PL Unit and 2 NDBs process are running on each DS Unit, (6) Replication Channels are OK, 'M': Master, 'Sn': Slave replication channel #n is active. (7)There is no new alarm is printed, more information refe