R TRAINING PROGRAM[二類參考]

1、PART 46 MINER TRAINING PROGRAMNORTH CAROLINA DEPARTMENT OF LABORMINE AND QUARRY BUREAUCOMPANY: MINE: COUNTY: Surface教學類Direct Miner Training Plan: As per 30 CFR Part 46.3This company intends to follow the training regulations as set forth in the Code of Federal Regulations Title 30, Part 46.3 dated

2、October 1, 1999._Production Operator/Independent Contractor name: _ Signature:_ Title:Date:COMPANY NAME: MINE NAME:ID#MINE PRODUCT:SIC#MAILING ADDRESS: TELEPHONESAFETY AND HEALTH DESIGNEE: POSITION:ADDRESS:PERSON RESPONSIBLE FOR TRAINING:TITLE: NUMBER OF EMPLOYEES:STATEMENT OF INTENTUnder Section 11

3、5 of the Federal Mine Safety and Health Act of 1977, each operator is required to train miners so that job duties may be performed safely.So that employees may benefit fully from the training experience, courses should be mine and/or job specific in nature. Course work that provides specific informa

4、tion is both beneficial and meaningful to employees and employers. The training sessions will be conducted by certified MSHA instructors and/or persons designated by the production operator/independent contractor as competent as per 46.2(b) to teach. This company may request assistance from: state,

5、federal agencies; associations or production operators or independent contractors; miners representatives; consultants; manufacturers representatives; private associations; educational institutions; or other training providers that can qualify under 46.2(b). The following instructors and/or organiza

6、tions will provide the required training.Instructor/organizationSubject areas competent to instruct1.NC DOL Mine & Quarry BureauNew Miner, Newly Hired ExperiencedMiner, Annual Refresher2._3._4._5._6._7._8._9._10._Note: All training must be conducted by a Competent Person and they shall belisted

7、in this training plan as to what training and/or subjects they are competent to teach. List others on a separate sheet of paper and attach it to this training plan.This mine reserves the right to substitute, as applicable, health and safety training required by the Occupational Safety and Health Adm

8、inistration (OSHA), or other federal or state agencies to meet requirements under this part. This training must be relevant to subjects required in part 46 and must be documented in accordance with 46.9 of this part. as per 46.(c) This training may consist of classroom instruction at the mine, inter

9、active computer-based instruction or other innovative training methods, alternative training technologies, or any combination of training methods. as per 46.4(d)Employee health and safety meetings, including informal health and safety talks and instruction, may be credited under this part toward eit

10、her new miner training, newly hiredexperienced miner training, or annual refresher training requirements. In such health and safety meetings only the portion of the session actually spent in training will be recorded in accordance with 46.9 of this part. as per 46.4(e)TRAINING CATEGORIES AND TRAININ

11、G LOCATIONSTraining for the following categories will be provided on or near the mine site:46.5 New Miner46.6 Newly Hired Experienced Miner 46.8 Annual Refresher TrainingTraining for the following categories will be provided on the mine site:46.7 New Task Training46.11 Site-specific Hazard Awareness

12、 TrainingTraining programs and requirements for each category are enclosed.CATEGORY:New Miner Training - 46.5Time:Except as provided in paragraphs (f) and (g) of section 46.5, each new miner will be provided with no less than 24 hours of training as prescribed by paragraphs (b), (c), and (d) of sect

13、ion 46.5. Miners who have not yet received the full 24 hours of new miner training will work where an experienced miner can observe that the new miner is performing his or her work in a safe and healthful manner. All times listed are approximate in duration. Task Training will be used to satisfy por

14、tions of this part as described in 46.7(e).Course of Instruction:The specific courses required under 30 CFR, Section 46.5(b) and additional mine specific courses will be taught to this category of miner. No less than four (4) hours of training in the following subjects, which must also address site-

15、specific hazards, will be given before a new miner begins work at the mine. These courses include the following:1. An introduction to the work environments; Hrs;_ 2. Instruction on the recognition and avoidance of electrical hazards and other hazards present at the mine, such as traffic patterns and

16、 control, mobile equipment and loose or unstable ground conditions; Hrs;_ 3. A review of the emergency medical procedures, escape and emergencyevacuation plans in effect at the mine, and instruction on the firewarning signals and firefighting procedures; Hrs;_ 4. Instruction on the health and safety

17、 aspects of the tasks to be assigned, including the safe work procedures of such tasks, the physical and health hazards of chemicals and the mandatory health and safety standards pertinent to such tasks; Hrs;_ 5. Instruction on the statutory rights of miners and their representatives under the Act;

18、Hrs;_ 6. A review and description of the line of authority of supervisors and miners representatives and the responsibilities of such supervisors and miners representatives; Hrs;_ 7. An introduction to company rules and procedures for reporting hazards; Hrs;_Within 60 calendar days after a new miner

19、 begins work at the mine each miner will be provided with training in the following subjects as per 46.5(c):1. Instruction and demonstration on the use, care, and maintenance of self-rescue and respiratory devices, if used at the mine; Hrs;_ 2. A review of first aid methods; Hrs;_ In accordance with

20、 46.5(d) within 90 calendar days after a new miner begins work at the mine they will be provided with the balance, if any, of the 24 hours of training on any other subjects that promote occupational health and safety for miners at the mine.NEW MINER TRAINING PROGRAM4 Hours - MinimumCourse Title*Est.

21、Time LocationConducted ByTeaching MethodCourse MaterialEvaluationSection 46.5(b)(1)Introduction to the work EnvironmentMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Company Policy &RulesMaps & PlansActual EquipmentVisualsWritten, OralTesting Seq

22、uence and/or Job PerformanceSection 46.5(b)(2)Hazard Recognition and AvoidanceMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA ManualsCompany Policy & RulesHealth & Safety StandardsVisuals, Mine & Quarry Bureau Training MaterialsWritten, O

23、ralTesting Sequence and/or Job PerformanceSection 46.5(b)(3)Emergency Medical Procedures, Escape and Emergency Evacuation Plans, Firewarning Signals & Firefighting ProceduresMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Mine Maps, Emergency Phone Li

24、st, First Aid Book, Evacuation Plan and Escape RoutesWritten, OralTesting Sequence and/or Job PerformanceSection 46.(b)(4)Health & Safety Aspects of Assigned Tasks including Physical and Health Hazards of Chemicals & Mandatory Health & Safety StandardsWarning and FirefightingMine SiteMSH

25、A ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA ManualsCompany Policy & Rules, HazCom Program,Health & Safety StandardsVisuals, Equipment Manuals (if applicable)Written, OralTesting Sequence and/or Job PerformanceNEW MINER TRAINING PROGRAMSurface Continu

26、edCourse Title*Est.Time LocationConducted ByTeaching MethodCourse MaterialEvaluationSection 46.5(b)(5)Statutory Rights of Miners and Their RepresentativesUnder the ActMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA ManualsCompany Policy & RulesTh

27、e ActHealth & Safety StandardsVisualsWritten, OralTesting Sequence and/or Job PerformanceSection 46.5(b)(6)Authority and Responsibilities of Supervisors and Miners RepresentativesMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA ManualsCompany Poli

28、cy & RulesThe ActHealth & Safety StandardsVisualsWritten, OralTesting Sequence and/or Job PerformanceSection 46.5(b)(7)Company Rules and Procedures for Reporting HazardsMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Company Policy & RulesHeal

29、th & Safety StandardsVisualsWritten, OralTesting Sequence and/or Job PerformanceSection 46.5(c)(1)Respiratory DevicesIf applicableMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Company Policy & RulesHealth & Safety StandardsVisualsActual Equi

30、pmentWritten, OralTesting Sequence and/or Job PerformanceSection 46.5(c)(2)First Aid MethodsMine Site or Other Location as NeededMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)First Aid ManualsFirst Aid Equipment & SuppliesVisualsWritten, OralTesting Sequence

31、 and/or Job PerformanceCATEGORY: Newly Hired Experienced Miner Training - 46.6 Time:Except as provided in paragraph (f) of section 46.6, each newly hired experienced miner will be provided with training as prescribed by paragraphs (b), and (c) of section 46.6. Part 46 does not specify a minimum leng

32、th of time that must be devoted to this category of training. All times indicated are approximate in duration.Course of Instruction:All courses required by 30 CFR, Section 46.6(b) will be taught before a newly hired experienced miner begins work at the mine. The following subjects, which also addres

33、s site specific hazards, will be taught:1. An introduction to the work environments; Hrs;_ 2. Instruction on the recognition and avoidance of electrical hazards and other hazards present at the mine, such as traffic patterns and control, mobile equipment and loose or unstable ground conditions; Hrs;

34、_ 3. A review of the emergency medical procedures, escape and emergency evacuation plans in effect at the mine, and instruction on the firewarning signals and firefighting procedures; Hrs;_ 4. Instruction on the health and safety aspects of the tasks to be assigned, including the safe work procedure

35、s of such tasks, the physical and health hazards of chemicals and the mandatory health and safety standards pertinent to such tasks; Hrs;_ 5. Instruction on the statutory rights of miners and their representatives under the Act; Hrs;_ 6. A review and description of the line of authority of superviso

36、rs and miners representatives and the responsibilities of such supervisors and miners representatives; Hrs;_ 7. An introduction to company rules and procedures for reporting hazards; Hrs;_Within 60 calendar days after a new miner begins work at the mine each miner will be provided with training in t

37、he following subjects as per 46.6(c):1. Instruction and demonstration on the use, care, and maintenance of self-rescue and respiratory devices, if used at the mine; Hrs;_ This mine reserves the right as indicated in 46.6(d) to use practice under the close observation of a competent person to fulfill

38、 the requirement for training on the health and safety aspects of an assigned task in paragraph (b) (4) of this section, if hazard recognition training specific to the assigned task is given before the miner performs the task.教學類NEWLY HIRED EXPERIENCED MINER TRAINING PROGRAMSurfaceCourse Title*Est.T

39、ime LocationConducted ByTeaching MethodCourse MaterialEvaluationSection 46.6(b)(1)Introduction to the work EnvironmentMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Company Policy &RulesMaps & PlansActual EquipmentVisualsWritten, OralTesting Sequ

40、ence and/or Job PerformanceSection 46.5(b)(2)Hazard Recognition and AvoidanceMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA ManualsCompany Policy & RulesHealth & Safety StandardsVisuals, Mine & Quarry Bureau Training MaterialsWritten, Or

41、alTesting Sequence and/or Job PerformanceSection 46.5(b)(3)Emergency Medical Procedures, Escape and Emergency Evacuation Plans, Firewarning Signals & Firefighting ProceduresMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Mine Maps, Emergency Phone Lis

42、t, First Aid Book, Evacuation Plan and Escape RoutesWritten, OralTesting Sequence and/or Job PerformanceSection 46.(b)(4)Health & Safety Aspects of Assigned Tasks including Physical and Health Hazards of Chemicals & Mandatory Health & Safety StandardsWarning and FirefightingMine SiteMSHA

43、 ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA ManualsCompany Policy & RulesHealth & Safety StandardsVisuals, Equipment Manuals (if applicable)Written, OralTesting Sequence and/or Job PerformanceNEWLY HIRED EXPERIENCED MINER TRAINING PROGRAMSurfaceContin

44、uedCourse Title*Est.Time LocationConducted ByTeaching MethodCourse MaterialEvaluationSection 46.6(b)(5)Statutory Rights of Miners and Their RepresentativesUnder the ActMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d) As Per 46.4(d)MSHA ManualsCompany Poli

45、cy & RulesThe ActHealth & Safety StandardsVisualsWritten, OralTesting Sequence and/or Job PerformanceSection 46.6(b)(6)Authority and Responsibilities of Supervisors and Miners RepresentativesMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)MSHA Man

46、ualsCompany Policy & RulesThe ActHealth & Safety StandardsVisualsWritten, OralTesting Sequence and/or Job PerformanceSection 46.6(b)(7)Company Rules and Procedures for Reporting HazardsMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Company Policy

47、 & RulesHealth & Safety StandardsVisualsWritten, OralTesting Sequence and/or Job PerformanceSection 46.6(c)Respiratory DevicesMine SiteMSHA ApprovedInstructor or Competent Person Designated by the OperatorAs Per 46.4(d)Company Policy & RulesHealth & Safety StandardsVisualsActual Equi

48、pmentWritten, OralTesting Sequence and/or Job PerformanceCATEGORY: New Task Training - 46.7Time:There is no minimum time requirement in this category of training. However, 46.3(b)(3) states that an approved training plan must contain an approximate time or a range of time to be spent on each subject

49、 area. The range of time stated for this subject area is a general starting point. Regardless of the range of time, sufficient training time must be spent so that the trainee is able to perform the task to the satisfaction of the operator or competent person. Duration on time spent for each task wil

50、l be recorded.Course of Instruction:Training of miners assigned to new tasks for which they have no previous experience, or a change occurs in a miners assigned task that affects the health and safety risks encountered by the miner, must include the following as listed in 30 CFR, Section 46.7. 1. Sa

51、fety and Health Aspects, (to include the physical and health hazards of chemicals) and Safety Operating Procedures for Work Tasks, Equipment or Machinery (This training will be provided before the miner performs the new task); Hrs: _2. Practice - To be supervised by a competent person under close supervision either during light production or during non-production; (practice may be used to fulfill the requirement for task training under this section, if hazard recognition training specific to the assigned task is give before the miner performs the task.) Hrs: _ 3. Instruction on New