msp430LCD5110簡單顯示.

1、#includestdafx.h #includefont.hLCDWriteByte( /函數功能：寫字節數據/函數入口：dat數據；comma nd:1為寫 數據0為寫指令函數出口：無voidLCDWriteByte(uchar dat, uchar comma nd uchar i; CLRB(LCD_PORT,LCD_CS; if(comma nd SETB(LCD_PORT,LCD_DC; else CLRB(LCD_PORT,LCD_DC; for(i = 0;i 8;i+ if(dat & 0 x80 SETB(LCD_PORT,LCD_DIN; elseCLRB(LCD

2、_PORT,LCD_DIN; CLRB(LCD_PORT,LCD_CLK; dat = dat 1;SETB(LCD_PORT,LCD_CLK; SETB(LCD_PORT,LCD_CS; LCDSetAddr( /函數功能：寫地址函數入口：X:行；Y:列函數出口：無void LCDSetAddr(ucharX, uchar Y LCDWriteByte(0 x40 | Y, 0; / column LCDWriteByte(0 x80 | X, 0; / row LCDWriteChar( /函數功能：寫字符/函數入口：asc字符/函數出口：無voidLCDWriteChar(uchar a

3、sc uchar line; asc = asc-32; for (li ne=0; li ne 0;i-LCDWriteChar(ni-1+0; /從ACSII碼表中讀取字節，然后寫入液晶LCDWriteString( /函數功能：寫字符串函數入口：地址坐標X，Y字符串起始指/函數名稱:乍十*S /函數 出口：無/* voidLCDWriteString(uchar X,uchar Y,char *s LCDSetAddr(X,Y; /光標定位while (*sLCDWriteChar(*s+; /* /LCDClear( /函數功能：LCD清屏/函數入口：無/函數出口：無/* void L

4、CDCIear( uint i j;LCDWriteByte(OxOc, 0; LCDWriteByte(0 x80, 0; for (i=0; i 84; i+ for(j = 0;j 6;j+LCD/ritcBytc(0 x00 1 /*/函數名稱：LCDInit( /函數功能：LCD初始化/函數入口：無/函數出口:LCD In it( CLRB(LCD_PORT,LCD_RST; SETB(LCD_PORT,LCD_RST;CLRB(LCD_PORT,LCD_CS; SETB(LCD_PORT,LCD_CS; LCDWriteByte(0 x21, 0; /使用擴展命令設置LCD模式LCDWriteByte(0 xc8, 0; /設置偏置電壓LCDWriteByte(0 x06, 0; /溫度校正LCDWriteByte(0 x13, 0; / 1:48LCDWriteByte(0 x20, 0; /使用基本命令LCDClear(; /清屏LCDWriteByte(0 x0c, 0; /設定顯示模式，正常顯示CLRB(LCD_PORT,LCD_CS; /關閉LCD 函數功能：顯示函數入口：無函數出口：無voidDisplay( LCDClear(; LCDWriteStri ng(0,0,