關于GIS地圖ClearType增強屏幕字體的配置與使用

1、使用ClearType增強屏幕字體1) Local Road layer:- Add data ,ArcMap will put a single line.- Click on symbol, select symbol Freeway- Click on properties, It will open a window called Symbol Property Editor- On the left bottom, you will see two symbols under "Layers". Change the red symbol color to whi

2、te with a widthof 4 points. Change the black outline symbol to light gray with width 6.4 points.- Select line cap and line joints to be round. This will make your road ends look nicely rounded. - Click apply and ok.- select the same layer again and go to properties. selectsymbology and click on adva

3、nced -> Symbol levels.- select "Draw this layer using ." option and select Join. This way, the intersections will be nicely merged and itwill not look as if the roads are crossing each other.- Also read "About Symbol Levels" on bottom right of that screen. Click OK.- Select th

4、e same layer again and go to labels tab. Select bold Arial 10.- Click "Placement properties" select "Placement" tab. Under orientation select "Curved". This will make yourlabels curved along the roads.如何啟用ClearType若要將ClearType用于屏幕字體，請：1. 單擊開始，單擊控制面板，單擊“外觀和主題”，然后單擊顯示。2.

5、在外觀選項卡上，單擊效果。3. 單擊選中“使用下列方式使屏幕字體的邊緣平滑”復選框，然后單擊該列表中的ClearType（清晰）?；氐巾敹巳绾巫远xClearType可根據個人喜好調整ClearType的對比度設置。盡管Windows XP 中沒有執行此操作的工具回到頂端如何解決可能遇到的問題顯示器看上去模糊ClearType旨在增強LCD 顯示。它在標準的桌面監視器和一些LCD 顯示器上看上去可能有點模糊?？砂凑毡疚闹小叭绾巫远xClearType”一節中介紹的步驟自定義ClearType來改善此問 題。在極少數情況下，所感覺到的模糊是由于LCD 顯示器在制造上的異常（正常的紅-綠-藍條紋被顛倒 為藍-綠-紅）造成的。目前，Windows XP 的ClearType不支持對這種異常的補償。如果在某 個LCD 顯示器上，任何ClearType對比度設置的效果都不好，則可能就是這種問題。在這些情 況下，最好關閉ClearType。顏色設置必須支持ClearType若要使用ClearType，必須有一個至少支持256 色的視頻適配器和監視器。支持增強色（24 位）或真彩色