江科大計算機網絡實驗報告小型局域網的構建

1、精選優質文檔-傾情為你奉上計算機網絡實驗報告  專   業：  信息管理與信息系統   課題名稱：   小型局域網的構建 班  級：   學  號：   姓  名：        指導教師：       任務：小型局域網的構建【需求分析】某企業有公司辦公室、財務部、銷售部、設計部、生產部5

2、個部門。每個部門預算配置200臺電腦，公司使用一個B類網絡地址129.250.0.0?，F(xiàn)要求：1、 每個部門劃分1個子網；2、 通過配置路由協議實現不同VLAN之間的主機能夠互通。【實驗任務】1、 完成企業網絡拓?fù)浞桨冈O(shè)計；2、 列出所需網絡設備、PC機的設備清單；3、 給出部門PC機的IP地址分配方案；4、 給出第三層VLAN設計方案；5、 給出路由器配置方案6、 驗證調試?！緦?shí)驗環境】計算機操作系統：Windows 7；軟件：Cisco Packet Tracer【實驗任務設計】1、拓?fù)鋱D： 2、所需網絡設備、服務器、PC機的設備清單:設備名稱數量主機1000二層交換機44三層交換機2網線

3、若干3、部門PC機的IP地址分配方案:VLAN號相應部門子網IP子網掩碼2財務部129.250.1.0/24255.255.255.03銷售部129.250.2.0/24255.255. 255.04辦公室129.250.3.0/24255.255. 255.05設計部129.250.4.0/24255.255. 255.06生產部129.250.5.0/24255.255. 255.04、第三層VLAN設計方案VLAN號接口號三層交換機2Fa 0/1Multilayer Switch03Fa 0/24Fa 0/310Fa 0/45Fa 0/1Multilayer Switch16Fa 0/2

4、10Fa 0/4【實驗內容】一、安裝packet tracker軟件二、打開軟件，添加五個兩層交換機和兩個三層交換機，主機10臺然后用連接線連接各個部分三、配置兩層交換機switch0Switch>enableSwitch#configure terminalEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#vlan 2Switch(config-vlan)#name officeSwitch(config-vlan)#exit /創建vlan2 名稱office（辦公室）Switch(c

5、onfig)#vlan 3Switch(config-vlan)#name financeSwitch(config-vlan)#exit /創建vlan3 名稱 finance（財務部）Switch(config)#vlan 4Switch(config-vlan)#name salesSwitch(config-vlan)#exit /創建vlan4 名稱 sales（銷售部）Switch(config)#Switch(config)#interface FastEthernet0/1Switch(config-if)#Switch(config-if)#exitSwitch(config

6、)#no vlan 3Switch(config)#no vlan 4Switch(config)#Switch(config)#interface FastEthernet0/4Switch(config-if)#Switch(config-if)#exitSwitch(config)#interface FastEthernet0/4 /將端口fa0/4劃分到vlan2Switch(config-if)#Switch(config-if)#Switch(config-if)#switchport access vlan 2Switch(config-if)#Switch(config-if

7、)#exitSwitch(config)#interface FastEthernet0/5 /將端口fa0/5劃分到vlan2Switch(config-if)#Switch(config-if)#Switch(config-if)#switchport access vlan 2Switch(config-if)#Switch(config-if)#exitSwitch(config)#interface FastEthernet0/1 /將端口fa0/1設置TrunkSwitch(config-if)#Switch(config-if)#switchport mode trunkSwit

8、ch(config-if)#%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to upSwitch(config-if)#switchport mode accessSwitch(config-if)#Switch(config-if)#Switch(config-if)#switchport access vlan

9、 2Switch(config-if)#Switch(config-if)#exitSwitch(config)#Switch#四、配置三層交換機Switch>enableSwitch#configure terminalEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#interface FastEthernet0/1Switch(config-if)#Switch(config-if)#switchport mode trunkCommand rejected: An interfac

10、e whose trunk encapsulation is "Auto" can not be configured to "trunk" mode.Switch(config-if)#%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to upSwitch(config-if

11、)#exitSwitch(config)#interface FastEthernet0/2Switch(config-if)#Switch(config-if)#switchport mode trunkCommand rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode.Switch(config-if)#%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEt

12、hernet0/2, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to upSwitch(config-if)#exitSwitch(config)#interface FastEthernet0/3Switch(config-if)#Switch(config-if)#switchport mode trunkCommand rejected: An interface whose trunk encapsulation is "

13、;Auto" can not be configured to "trunk" mode.Switch(config-if)#%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to upSwitch(config-if)#exitSwitch(config)#exitSwitch#vlan

14、 database% Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode.Switch(vlan)#%SYS-5-CONFIG_I: Configured from console by consolevlan 10 name vlan10VLAN 10 modified: Name: vl

15、an10Switch(vlan)#Switch(vlan)#Switch(vlan)#Switch(vlan)#Switch(vlan)#vlan 2 name office /創建vlan2 名稱office（辦公室）VLAN 2 modified: Name: officeSwitch(vlan)#vlan 3 name finance /創建vlan3 名稱 finance（財務部）VLAN 3 modified: Name: financeSwitch(vlan)#vlan 4 name sales /創建vlan4 名稱 sales（銷售部）VLAN 4 modified: Name

16、: salesSwitch(vlan)#Switch(vlan)#exitAPPLY completed.Exiting.Switch#configure terminalEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#interface FastEthernet0/1 /將端口fa0/1劃分到vlan2Switch(config-if)#Switch(config-if)#Switch(config-if)#switchport access vlan 2Switch(config-if)#

17、Switch(config-if)#exitSwitch(config)#interface FastEthernet0/2 /將端口fa0/2劃分到vlan3Switch(config-if)#Switch(config-if)#Switch(config-if)#switchport access vlan 3Switch(config-if)#Switch(config-if)#exitSwitch(config)#interface FastEthernet0/3 /將端口fa0/3劃分到vlan4Switch(config-if)#Switch(config-if)#Switch(c

18、onfig-if)#switchport access vlan 4 Switch(config-if)#Switch(config-if)#exitSwitch(config)#interface FastEthernet0/4 /將端口fa0/4劃分到vlan10Switch(config-if)#Switch(config-if)#Switch(config-if)#switchport access vlan 10Switch(config-if)#（另外一個三層交換器配置相同）為不同vlan配置IP地址Switch>enSwitch>enSwitch>enable

19、Switch#intSwitch#conf tEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#intSwitch(config)#interface vlan 2Switch(config-if)#%LINK-5-CHANGED: Interface Vlan2, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to upSwitch(config-if)#ip ad

20、dSwitch(config-if)#ip address 129.250.1.1 255.255.255.0Switch(config-if)#intSwitch(config-if)#exitSwitch(config)#intSwitch(config)#interface vlan 3Switch(config-if)#%LINK-5-CHANGED: Interface Vlan3, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan3, changed state to upSwitch(c

21、onfig-if)#ip addSwitch(config-if)#ip address 129.250.2.1 255.255.255.0Switch(config-if)#exitSwitch(config)#intSwitch(config)#interface vlan 4Switch(config-if)#%LINK-5-CHANGED: Interface Vlan4, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan4, changed state to upSwitch(config-

22、if)#ip addSwitch(config-if)#ip address 129.250.3.1 255.255.255.0Switch(config-if)#exitSwitch(config)#intSwitch(config)#interface vlan 10Switch(config-if)#%LINK-5-CHANGED: Interface Vlan10, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to upSwitch(config-if)

23、#ip addSwitch(config-if)#ip address 129.250.10.1 255.255.255.0Switch(config-if)#exitSwitch(config)#Switch>enSwitch>enSwitch>enable Switch#intSwitch#conf tEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#intSwitch(config)#interface vlan 5Switch(config-if)#%LINK-5-CH

24、ANGED: Interface Vlan5, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan5, changed state to upSwitch(config-if)#ip addSwitch(config-if)#ip address 129.250.4.1 255.255.255.0Switch(config-if)#intSwitch(config-if)#exitSwitch(config)#intSwitch(config)#interface vlan 6Switch(config

25、-if)#%LINK-5-CHANGED: Interface Vlan6, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan6, changed state to upSwitch(config-if)#ip addSwitch(config-if)#ip address 129.250.5.1 255.255.255.0Switch(config-if)#exitSwitch(config)#intSwitch(config)#interface vlan 4Switch(config-if)#%

26、LINK-5-CHANGED: Interface Vlan4, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan4, changed state to upSwitch(config-if)#ip addSwitch(config-if)#ip address 129.250.3.1 255.255.255.0Switch(config-if)#exitSwitch(config)#inSwitch(config)#interface vlan 10Switch(config-if)#%LINK-5

27、-CHANGED: Interface Vlan10, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to upSwitch(config-if)#ip addSwitch(config-if)#ip address 129.250.10.2 255.255.255.0Switch(config-if)#exitSwitch(config)#使用OSPF動態路由協議為不同vlan配置路由Switch>enSwitch#conf tEnter configur

28、ation commands, one per line. End with CNTL/Z.Switch(config)#rouSwitch(config)#router ospf 1IP routing not enabledSwitch(config)#Switch(config)#ip routing /啟動路由協議Switch(config)#rouSwitch(config)#router ospf 1 /啟動OSPF協議Switch(config-router)#netSwitch(config-router)#network 129.250.1.0 0.0.0.255 area

29、0 /左邊交換器聲明路由Switch(config-router)#netSwitch(config-router)#network 129.250.2.0 0.0.0.255 area 0Switch(config-router)#netSwitch(config-router)#network 129.250.3.0 0.0.0.255 area 0Switch(config-router)#endSwitch#Switch#conf tEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#rouSwitch(config)#router ospf 1Switch(config-router)#netSwitch(config-router)#network 129.250.10.0 0.0.0.255 area 0Switch(config-router