furunoecdismultiplechoicetest古野電子海圖題庫測試題

1、1. Which operation can you perform on the FURUNO ECDIS ( B )a. I can play back my shipspasttrack on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the

2、Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS ( A )a. I can record my position manually on the ENCs.b. I can set the ECDIS to automatically choosing a Safety contour basedon my setting of ship s maximum draft.c. I can set Ship s maximum height to enable chart alerts

3、 from areas in the charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS ( C )a. Ican record target ship s position in the Voyage log automatically.b. Ican record a position fix

4、 manually by using just one distance andone bearing.c. Ican playback my past voyage track on the charts.d. Ican send my Route Plan and User Chart to a FURUNO GPS for display onthe GPS.4. Which operation can you perform with the FURUNO ECDIS ( D )a. I can send my Route Plan and User Chart to any RADA

5、R for display onthe RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform

6、 during a voyage ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USBmemory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from

7、 the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage ( D )a. I can add additional records of manual positions to the Voyage Logadding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save i

8、t toa USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion ofa voyage ( B )a. I can use the Event function to record special events in the

9、Details Log.b. I can view and print a copy of the Voyage Log. (或更換為 Details Log)c. I can create a backup copy of Own Ship s past track (120 minutes max.)on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8.

10、 What is a Manual Update ( B )a. A Manual Update is an update applied using the Manual function in Load& Update Charts.b. A Manual Update is an update to the charts created by the operatorfrom information received from the Pilot- a Navtex message - a VHF broadcastetc.c. A Manual Update is an upd

11、ate applied to the charts by an official representative of the chart producer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed o

12、n my ECDIS and this is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDI

13、S.11. How can you see if a chart object is created using Manual Updated( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using ManualUpdates.12. Can you

14、copy your Manual Updates from one FURUNO ECDIS to another( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No- but I can transfer them to another manufacturer s type of ECDIS.13. Can you create a Ma

15、nual Update from an AIS Safety Message shown onthe ECDIS ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create itautomatically.d. No.14. Can you create a Manual Update from an Navtex M

16、essage shown on the ECDIS ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create itautomatically.d. No.15. What should you remember to set up before planning a route ( D )a. Thesetting

17、for the Voyage Log.b. The Alarm Level in the Operation submenu.c. TheConning Display in Installation Parameters.d. TheChart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the rou

18、te monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanningthe ENCs for danger to navigation and hazardous objects.17. How do you record Own Ship s position on the ECDIS charts when you have a R

19、ange/Bearing observation from your RADAR ( B )a. I cannot record own ship s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the CTRL & ACQ/ACT button on the Control Unit.d. I select Record Event Log and User Event from the Instant Accessba

20、r and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS ( D ) a.Iuse my paper Logbook as documentation.b. Iuse my paper Logbook and my VDR or SVDR asdocumentation.c. Iuse the tracking function in the symbol display.d. Ishow a play

21、back of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have beenapplied to the FURUNO ECDIS ( B )a. In theChart Legend.b. In theManual Update Window.c. In theChart Catalogue.d. In theChart Display menu.20. Which color scheme is used for Manual update on t

22、he FURUNO ECDIS( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Targ

23、et size ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate (A)a.

24、No officialdatab. Log errorc. Dual axislog (WT)errord. Dual axislog (BT)error25. What does the alert number 257 indicate ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate ( D )a. Route: Illeg

25、al To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour ( C )a. InChart Legendb. I

26、nSymbol Displayc. InChart Alertd. InChart Display29. Where do you set the Shallow Pattern ( C )a. InChart Displayb. InSymbol Displayc. InBasic Settingd. Inchart catalogue30. Where do you set the Deep Contour ( C )a. InChart Legendb. InSymbol Displayc. InChart Alertd. InChart Display31. Where do you

27、control the AIO ( C )a. InChart Legendb. InSymbol Displayc. InChart Displayd. InChart Catalogueit means ( A )it means ( C )32. When an ENC is outlined in Green in the Chart Cataloguea. License is valid chart is up-to-dateb. License is valid chart is NOT up-to-datec. License is available chart not in

28、stalledd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Cataloguea. License is valid chart is up-to-dateb. License is available- chart not installedc. License is valid up-to-date status doubtfuld. License is not available or has expired34. Which informatio

29、n can you find in the Raster Chart Legend ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you

30、 find in the Raster Chart Legend ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD ( C) a.On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which reco

31、rding function is available in the FURUNO ECDIS ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS(

32、 A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS ( C )a. In theVoyage Logb. In theSystem dialogueof theMenuc. In theAbout dialogued. In theS52 PresentationLibrary42. Which ECDIS

33、setting is adjusted in Ship and Route Parameters ( D )a.Position offsetb. Safety Contourc. Alarm volumed. Ship s maximum speed43. Which printing option is available for the User Chart ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area

34、 ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of c

35、hart object in the Chart Displaydialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning too

36、l47. Can you monitor a route even though it indicates an active Alert when you have completed theRoute Plan Check ( A )a. Yes the only thing preventing me from monitoring would be animpossible Turn message in the WPT tab.b. Yes if I enter the Service Safety Passwordc. Nod. It depends on the type of

37、Alert generated (Safety Contour RestrictedArea - Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the

38、new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship s current position in the Logs ( D ) a. By opening the Voyage Log and entering the current position.

39、b. By right clicking on own ship icon on the userinterface.c. By pressing the Record button on the ControlUnit.d. By using the record position event function ofthe EventLog.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners ( 或改為 a N

40、avtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are includedin the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an a

41、larm from the Chart Alert setting ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route ( C )a. Nob. Yes but only if Ihave two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but

42、 I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited( B )a. I don t. The route is automatically saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I

43、 select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical obs

44、ervations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base andUpdate CDs.55. How do you switch the Kalman filter on or off (

45、B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on thePosition tab.d. The

46、 Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the informatio

47、n using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool ( A )a. I select“ Planning ”and then“ User

48、Chart ”in the Quick Access barwhen in Plan mode.b. I select“ Planning ”and then“ User Chart ”in the Quick Access barwhen in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar- then I selectPlan.59. Where do you select the color P

49、alette used to display the charts ( C )a. InChart Legend.b. InChart Display.c. InQuick Access Bar.d. InChart Catalogue.60. Where do you control the settings and visibility of the chart layers ( C )a. InChart Legendb. InSymbol Displayc. InChart Displayd. InBasic Setting61. Where do you control the vi

50、sibility of the user overlays (User Chart一Route - etc.) ( B )a. InChart Legendb. InSymbol Displayc. InChart Displayd. InChart Catalogue62-1. Where do you change the visibility of your User Chart (或改為 monitoredroute / plannedroute/circles) ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displa

51、yd. In Chart Catalogue62-2. Where do you change the Ship Outlines ( 或改為 Velocity Vectors style) ( C ) a.In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS ( C )a. T&Ps must always be created as manual Updates.b. I c

52、reate a Manual Update containing the T&Ps using the Manual functionin the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO EC

53、DIS.64. Where can you update the ENCs ( A )a. In theChart Manager (Individual Update).b. In theUpdate function of chart displayc. In theUpdate function of the System settings.d. In theUpdate function of the Chart Legend.65. How can you reset the odometer ( A )a. I canreset theodometer fromthe Voyage

54、 tab of the Menu.b. I canreset theodometer fromthe Sensor setting dialogue.c. I canreset theodometer fromthe Symbol Display dialogue.d. I canreset theodometer fromthe Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated it is importantthat ( C )a. The software should be lo

55、aded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route ( C )a. The setting fo

56、r the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) tobe used during monitoring in the FURUNO ECDIS ( D )a. Inthe Voyage Log.b. Inthe Pilot Data.

57、c. Inthe User Event function.d. Inthe User Chart.69. How do you start the route planning tool ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update o