課件文稿成果5g nr bs testbed integration

1、5G BPU integrationZIMER WANGBlade PC Setup and ConfigurationSetup L1/L2 with source codeSetup L1/L2 with released SWcatalogueBlade PC Setup and ConfigurationTopology_connection_V2.0Install Ubantu system on blade PCUse USB flask disk guide to install Linux Ubantu SystemFormat the disk when disk space

2、 not enough in the first disk partitionSet the time zoneSet computers nameSet user and password (tb-user/Tall1)Connect Blade server to internet by cable.Install open-ssh server by command:sudo apt-get updatesudo apt-get install open-ssh serverVerify the install status by conmand:ifconfig | grep netT

3、hen we can connect the blade server by remote ssh.eg ssh tb-user 10.170.43.xxxInstall the open-ssh serverUpgrade installed packagesAdd extra packages needed for flake, tbx, BB and RCS and DUS work and other necessary function unitsSet up build environmentGet and install Xmas GUI sudo wget sudo wget

4、Get and install dbg/sdk/flakesudo wget sudo dpkg -i flex-dbg_6.46-1.debsudo wget sudo dpkg -i fader2-sdk_1.66-1.debsudo wget sudo dpkg -i flake-tools_0.2-1.debConfigure TFTPBOOT sudo vi /etc/xinetd.d/tftpbootservice tftp protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server =

5、/usr/sbin/in.tftpd server_args = /tftpboot disable = noCreate tftpboot fileCreate tftpboot directorysudo mkdir /tftpbootsudo chmod 777 tftpbootsudo service xinetd restartCheck status sudo netstat -a | grep tftpudp 0 0 *:tftp *:* #okConfigure network interfacesConfigure DNS & Proxy sudo vi /etc/resol

6、vconf/resolv.conf.d/baseAdd:nameserver 10.170.xx.xxvi /etc/bash.bashrcexport http_proxy= :8080export https_proxy= :8080sudo vi /etc/apt/apt.conf.d/lchProxyAdd:Acquire:http:proxy ;Configure interfaces filesudo vi /etc/network/interfacesConfigure host filesudo vi /etc/hostsConfigure DNS & Proxy sudo v

7、i /etc/resolvconf/resolv.conf.d/basewget # to check the networkSetup DHCP serverConfigure DHCP server by following command:vim /etc/dhcp/dhcpd.conf content as:Edit the interface. The DHCP should work on, eg. eno2“sudo vi /etc/default/isc-dhcp-serverAdd the interface as follow INTERFACES=eno4Add user

8、 and download codeAdd user by command:adduser eidSet password and some informationKey generationSu eidssh-keygencat /home/ezdonsh/.ssh/id_rsa.pub TBX ConfigurationTBX ConfigurationTBX ConfigurationNIC that needs to be configured into another mode, e.g. from 40 Gpbs into 4x10 Gpbs follow these stepsC

9、heck NIC Configuration and make sure that 4x10 is listed under Supported Configurations! Setup L1/L2 with source codeInstall DUS5216Download installation script or offline package for DUS5216sudo wget Package Installation for DUS5216sudo make install dusIp= dusId=dus004 bladeIp=45tftpDir=/tftpboot/d

10、us004 serial=ts 4004 wipe_disk=wipe_diskssh rootdus00 x /psd:Tall12lsb_release -arebootCheck DUS TB Linux release after installation (username/password: root/labrat)cd /home/ezdonsh/flake/tools/scripts./flake_dus52_status dus00 xSetup L1/L2Step1：L1 session: source /flake/tools/scripts/setup.sh trini

11、tycd /tb5g/tb5g_3gpp/projects/TBX+DUS/real_radio/dus_bsexport ODLGEN_FILTER_LEVEL=DEBUGconfigure -s sw_sub6_tbx_DLUL.js map_tbx_DLUL_sub6.js /flake/tools/hw/ki/dus/hw-dus005.js /flake/tools/hw/ki/hw-extern-pc.js make -j 8Step2：L2 session（opn a new session，diff to L1）source /flake/tools/scripts/setup

12、.sh trinitysource /tb5g/tb5g_x/scripts/setup.shcd /tb5g/tb5g_3gpp/projects/TBX+DUS/real_radio/tbx_bsmake mrpropermake configure / BCF_MODE=NO_PROTOBUF make configure （如果下一步 make -j 出現(xiàn)錯(cuò)誤，不要急更新最新 code，嘗試使用后面命令）make -jsudo ./tbx_bs.app -c tbx_sub6.cfg/tb5g/tb5g_x/scripts/release/tbx_cleanStep3：L1 sessi

13、on: （在上面L1部分執(zhí)行）make run (ruing is ok,q to quit)xg2_open_gui -gui-port 13974 / Open GUI to config BS）edit the port number and this will not be conflict with the existing opened GUI Update code (gave by developer)cd /tb5g/tb5g_3gppgit reset -hard 8d9b6a7ef7d78852bb270c6f0154a74f111bfe35 cd mongit rese

14、t -hard 04fb3ee4f676084552222d34fbf0d03a3be527a3 cd /tb5g/tb5g_xgit reset -hard d876dce244d7f778598f53727ef5e09e2f7dc091Setup L1/L2 with released SWUpload the package to both BS and UE side, untar the .tar file, than the SW is available. cd ./Template_Build_Release/ #into SW foldersource setup.sh #source cd ./deploy/996-BS-1C-SUB6-DUS1/L2/ #into BS/L2/ foldersource ./scripts/setup.sh #source sudo ./L2.app -c tbx.cfg #run L2project (.cfg is configr