h3c msr系列路由器命令手冊v1.02-ip業務分冊

2 2arpcheck 2 3arpmax- 4arp 4arptimer 5disy 6disyarpip- 8disyarptimer 9disy - 9 reset 1 1disy - 1 - 1 -arp 2-arp 3 1ARPSnoo配置命 1arp-snoo 1disyarp-snoo..........................................................................................................3-resetarp-snoo.............................................................................................................3- 1 1arpfast-reply 1 1 1 1 1disyarpsource- 2 3 3 3arpanti-attackactive-ack 4 4 4 5 6 6disyarpanti-attacksource- 7 8arpanti-attackvalid-ack 9 9arprate-limit(interface 9arprate-limit(system arpauthorized arpdetection arpdetection arpdetection arpdetection disyarp disyarpdetection resetarpdetection 1 1disymac-d-forwarding 1 1 2 3 4 5MSRMSRMSRMSRarpcheckarpmax-arp-snooarpfast-replydisyarpanti-attackactive-ackenabledisyarparpanti-attackvalid-checkenablearprate-MSRMSRMSRMSRarpdisydisyH3CMSRarpcheckarpcheckenableundoarpcheckenable無ARP表項，否則會有錯誤提示。undoarpcheckenableARP表項的檢查功能，可MACMACARPMACMAC的靜態ARP表項。<Sysname>system-view[Sysname]arpcheckenablearpmax-learning-numarpmax-learning-num命令用來配置接口允許學習動態ARP表項的最大個數。undoarpmax-learning-num命令用來恢復接口允許學習動態ARP表項的缺省個數。##[Sysname]interfaceethernetarpmax-arpmax-num65536undoarpmax-無<Sysname>system-view[Sysname]arpmax-num65536Info:Pleasesaveconfigurationandrebootsystemtotakearparpstaticip-addressmac-address[vlan-idinterface-typeinterface-number] undoarpip-address -instance-instance-name：實例。-instance-name用來指定實例的名稱， ARPARPVLANVLANARPARP表項則重 vlan-idARPVLAN，vlan-idVLAN的IDvlan-idVLAN。VLANVLAN接口必 數ip-address指定的IP地址屬于同一網段。 如果undo命令中沒有指定 相關配置可參考命令resetarp和disyarp。[Sysname]arpstatic00e0-fc01-000010ethernetarptimerarptimeragingaging-undoarptimerarptimeragingARP表項的老化時間。undoarptimeraging命令用來恢復缺相關配置可參考命令disyarptimeraging。<Sysname>system-view[Sysname]arptimeraging10disydisyarp[[all|dynamic|static]|vlanvlan-id|interfaceinterface-typeinterface-number][[verbose][|{begin|exclude|include}regular-expression]|count]disyarp[[all|dynamic|static][slotslot-number]|vlanvlan-id|interfaceinterface-typeinterface-number][[verbose][|{begin|exclude|include}regular-expression]|count]disyarp[[all|dynamic|static][chassischassis-numberslotslot-number]|vlanvlan-id|interfaceinterface-typeinterface-number][[verbose][|{begin|exclude|include}regular-expression]|count]all：顯示所有的ARP表項。static：顯示靜態ARP表項。chassischassis-numberslotslot-number：顯示指定成員設備上指定單板的ARP表項。chassis-number表示設備在堆疊中的成員編號，可使用disyirf命令查看。slot-number表示單interfaceinterface-typeinterface-number：顯示指定接口的ARP表項。interface-typeinterface-number用來指定接口的類型和編號。相關配置可參考命令arpstaticresetarp。<Sysname>IPyarpallverboseType:S-StaticMACVLANIDS[NoD[No1D[No1D表1-1disyarp命令顯示信息描述IPARP表項的IPMACARP表項的MACVLANARP表項類型：動態，用D表示；靜態，用S表示；，用A表-instance<Sysname>disyarpallcountTotalEntry(ies):4disyarpip-disyarpip-address[verbose][|{begin|exclude|include}regular-expressiondisyarpip-address[slotslot-number][verbose][|{begin|exclude|includedisyarpip-address[chassischassis-numberslotslot-number][verbose][|{beginexclude|include}regular-expressionchassischassis-numberslotslot-number：顯示指定成員設備上指定單板的ARP表項。chassis-number表示設備在堆疊中的成員編號，可使用disyirf命令查看。slot-number表示單相關配置可參考命令arpstatic和resetarp。yarpIPType:S-MACVLANIDAging disyarptimerdisyarptimer無disyarptimeraging命令用來顯示動態ARP表項的老化時間。相關配置可參考命令arptimeraging。<Sysname>disyarptimeragingCurrentARPagingtimeis10minute(s)disy -disy - -instance-name[|{begin|exclude|include}regular-|count顯示指定實例的ARP表項。disyarp -instance命令用來顯示指定 相關配置可參考命令arpstatic和resetarp。 <Sysname>disy -instanceType:S- IP MAC VLANID 00e0-fc00-0001 Snaturemask-arpundonaturemask-arp無naturemask-arpenableARP請求必須是同一子網網段的限制，即支持自然網段的ARP請求。undonaturemask-arpenable命令用來恢復缺省情況。resetresetarp{all|dynamic|static|interfaceinterface-typeinterface-numberresetarp{all|dynamic|static|slotslot-number|interfaceinterface-typeinterface-numberresetarp{all|dynamic|static|chassischassis-numberslotslot-number|dynamic：表示清除動態ARP表項。static：表示清除靜態ARP表項。chassischassis-numberslotslot-number：表示清除指定成員設備上指定單板的ARP表項。interfaceinterface-typeinterface-number：表示清除指定接口的ARP表項。interface-typeinterface-number用來指定接口的類型和編號。 相關配置可參考命令arpstatic和disyarp。<Sysname>resetarp免費ARPgratuitous-arp-sendingenableundogratuitous-arp-sendingenable無功能。undogratuitous-arp-sendingenable命令用來恢復缺省情況。gratuitous-arp-learningenableundogratuitous-arp-learningenable無gratuitous-arp-learningenable命令用來使能免費ARP報文的學習功能。undogratuitous-arp-learningenable命令用來關閉免費ARP報文學習功能。ARPARPIP地址對應ARPIPARP表項，則無論是否開啟本功能，都將更新此ARP表項。disy interface-number用來指定接口的類型和編號。disylocal--arp命令用來顯示本地ARP的狀態是處于開啟（enabled）還是關如果指定接口，則顯示指定接口的本地ARP的狀態；如果不指定接口，則顯示所有接口的本地ARP的狀態。 <Sysname>disylocal- -arpinterfacevlan-interface2InterfaceVlan-interface2 ARPstatus:disy-dis -arp[interfaceinterface-typeinterface-numberinterfaceinterface-typeInterface-number：顯示指定接口的ARP的狀態。interface-typeinterface-number用來指定接口的類型和編號。 -arpenable<Sysname>disy -arpinterfaceethernet1/1InterfaceEthernet1/1ARPstatus: -arpenableundolocal- 無 -arpenable命令用來開啟本地ARP功能。undolocal- 來關閉本地ARP功能。 [Sysname]interfaceethernet 2.1.4-arp-arp 無

[Sysname]interfacevlan-interface2 -arpenable[Sysname]interfaceethernet1/1 -arpenableARP ARPSnoo配置命arp-snooundoarp-snoo無arp-snooenable命令用來使能ARPSnoo功能。undoarp-snooenable命令用<Sysname>system-view[Sysname]arp-snooenable[Sysname]vlan1[Sysname-vlan1]arp-snoodisyarp-snoo[ipip-address|vlanvlan-iddisyarp-snoo命令用來顯示ARPSnoo表項。如果沒有指定參數，表示顯示所有<Sysname>disyarp-snoovlanIP MAC VLANIDInterface ----Totalentry(ies)onVLAN1:2---表3-1disyarpsnoo命令顯示信息描述IPARPSnoo表項的IP地MACVLANARPSnoo表項所屬的VLANresetarp-snoo[ipip-address|vlanvlan-idSnoo表項。<Sysname>resetarp-snoovlanarpfast-replyarpfast-replyundoarpfast-reply無arpfast-replyenableARP代答功能。undoarpfast-replyenable用來恢復缺省情況。缺省情況下，關閉ARP代答功能。<Sysname>system[Sysname]vlan arpsource-suppressionenableundoarpsource-suppressionenable無arpsource-suppressionenable命令用來使能ARP源地址抑制功能。undoarpsource-suppressionenable命令用來恢復缺省情況。undoarpsource-suppressionlimit命令用來恢復缺省情況。至5秒后再處理，從而避免了所造成的危害。[Sysname]arpsource-suppressionlimitdisyarpsource-無<Sysname>dis yarpsource-suppressionARPsourcesuppressionisenabledCurrentsuppressionlimit:100Currentcachelength:表5-1disyarpsource-suppression顯示信息描述5秒時間間隔內可以接收到的同源IP，且目的IP地址不能解析的IP報文的最大數目Currentcachearpresolving-routeenableundoarpresolving-routeenable無arpresolving-routeenable命令用來啟用ARP防IP報文功能。undoarpresolving-routeenable命令用來關閉ARP防IP報文功能。[Sysname]arpresolving-routearpanti-attackactive-ackenableundoarpanti-attackactive-ackenable無arpanti-attackactive-ackenableARP主動確認功能。undoarpanti-attackactive-ackenable命令用來恢復缺省情況。ARP的主動確認功能主要應用于網關設備上，防止者仿冒用戶網關設備。使能ARP主動5ARP報文；如果沒有收到應答報文，則向之前收到的ARP報文對應的源發送一個單播請求，如果在隨[Sysname]arpanti-attackactive-ack源MAC地址固定的ARP檢測配置命arpanti-attacksource-mac{filter|monitorundoarpanti-attacksource-mac[filter|monitorundoarpanti-attacksource-mac命令用來恢復缺省情況。缺省情況下，關閉源MAC固定ARP檢測功能。濾；在monitor模式下只進行告警，不過濾ARP報文。[Sysname]arpanti-attacksource-macundoarpanti-attacksource-macaging-arpanti-attacksource-macaging-time命令用來配置源MAC地址固定的ARP檢測表項的老化時間。undoarpanti-attacksource-macaging-time命令用來恢復缺省情況。[Sysname]arpanti-attacksource-macaging-timemac-address&<1-n>：MAC地址列表。其中，mac-address表示配置的保護MAC地址，格式為H-H-H。&<1-n>MAC地址個數。n的取值范圍和設備相關，請以設arpanti-attacksource-macexclude-macMACMAC之后，即使該ARP報文中的MAC地址存在也不會被檢測過濾。undoarpanti-attacksource-macexclude-mac命令用來取消配置的保護MAC。undoarpanti-attacksource-mac固定的時間（5秒）內收到源MAC固定的ARP報文超過該閾值則認為存在。undoarpanti-attacksource-macthreshold命令用來恢復缺省閾值。[Sysname]arpanti-attacksource-macthresholddisyarpanti-attacksource-mac{slotslot-number|interfaceinterface-typeinterface-number}disyarpanti-attacksource-mac{chassischassis-numberslotslot-number|定的ARP檢測表項。chassis-number表示設備在堆疊中的成員編號，可使用disyirf命令查看。slot-number表示單板的槽位號，取值范圍請以設備的實際情況為準。（分布式堆疊設備）<Sysname>disyarpanti-attacksource-VLAN2<Sysname>disyarpanti-attacksource-macslotVLAN2<Sysname>disyarpanti-attacksource-macchassis1slot VLAN 2表5-2disyarpanti-attacksource-mac命令顯示信息描述VLANarpanti-attackvalid-checkenableundoarpanti-attackvalid-checkenable無arpanti-attackvalid-checkenableARPMAC一致性檢查功令用來關閉ARP報文源MAC一致性檢查功能。[Sysname]arpanti-attackvalid-checkarprate-limit(interfacearprate-limit{disable|rateppsdropundoarprate-ratepps：ARP限速速率，單位為包每秒（pps）。不同型號的設備支持的取值范圍不同，請以設ARPARP報文限速。undoarprate-limitARPARP報文上送限速功能，限速速率與設備的型號有關，請以設備的實際情況為[Sysname]interfaceethernet[Sysname-Ethernet1/1]arprate-limitrate50arprate-limit(systemarprate-limit{disable|rateppsdropundoarprate-arprate-limit{disable|rateppsdrop}[slotslot-numberundoarprate-limit[slotslot-numberratepps：ARP限速速率，單位為包每秒（pps）。不同型號的設備支持的取值范圍不同，請以設ARPARP報文限速。undoarprate-limitARP報文ARP報文上送限速功能，限速速率與設備的型號有關，請以設備的實際情況為[Sysname]arprate-limitrate505.7ARP配置命arpauthorizedenableundoarpauthorizedenable無用來關閉接口下的ARP功能。使能接口下的ARP功能后，會啟動接口下ARP表項的老化探測功能，并該接口學習并允許該接口學習動態ARP表項。[Sysname]interfaceethernetarpauthorizedtime-outundoarpauthorizedtime-time-out命令用來恢復缺省情況。[Sysname]interfaceethernetarpdetectionarpdetectionenableundoarpdetectionenable無undoarpdetectionenableARPDetection功能。缺省情況下，關閉ARPDetection功能。[Sysname]vlan1[Sysname-Vlan1]arpdetectionarpdetectionarpdetectionmode{dhcp-snoo|dot1x|static-bindundoarpdetectionmode{dhcp-snoo|dot1x|static-bindarpdetectionmodeARPDetection檢查模式。undoarpdetectionmode命令用來取消指定的ARPDetection檢查模式。[Sysname]arpdetectionmodedhcp-snoo[Sysname]arpdetectionmodedot1xundoarpdetectionstatic-bind[ip-addressarpdetectionstatic-bindIPMAC的靜態綁定表項。undoarpdetectionstatic-bind命令用來刪除已經配置的IP和MAC的靜態綁定表項。對于源IP存在綁定關系但是MAC地址不符的ARP報文，設備認為是報文進行丟棄處理；對arpdetectionarpdetectiontrustundoarpdetectiontrust無端口為ARP非信任端口。[Sysname]interfaceethernetarpdetectionarpdetectionvalidate{dst-mac|ip|src-mac}undoarpdetectionvalidate[dst-mac|ip|src-mac]的目的MAC地址一致。全0、全1、不一致的報是無效的，無效的報文需要被丟棄。ARPIPIPARPIP地址。arpdetectionvalidateARPMAC地址、IP地址的有效性檢查。使能有效性檢查時可以指定某一種檢查方式也可以配置成多種檢查方式的組合。undoarp[Sysname]arpdetectionvalidatedst-macsrc-macdisyarpdisyarp無相關配置可參考arpdetectionenable。<Sysname>disyarpARPdetectionisenabledinthefollowing1,2,4-表5-3disyarpdetection命令顯示信息描述ARPdetectionisenabledinthefollowingdisyarpdetectioninterfaceinterface-typeinterface-number：顯示指定接口的統計信息。interface-typeinterface-number用來指定接口類型和編號。disyarpdetectionstatistics命令用來顯示ARPDetection功能報文檢查的丟棄計數的統計信息。按端口顯示用戶檢查，報文有效性檢查和ARP報文上送限速的統計情況，只顯示丟棄<Sysname>disyarpdetectionstatisticsState:U-UntrustedT-TrustedARPpacketsdroppedbyARPinspect 0 00 00 0表5-4 ARP報文源和目的IPARP報文源MACARP報文結合用戶檢查（DHCPSnoo、802.1X、靜態綁定）不resetarpdetectioninterfaceinterface-typeinterface-number：表示清除指定接口下的統計信息。interface-typeinterface-number用來指定接口類型和編號。resetarpdetectionstatisticsARPDetection的統計信息。不指定接口時，清除所有的ARPDetection統計信息。<Sysname>resetarpdetection無相關配置可參考命令mac-d-forwardingnetwork-port。<Sysname>disymac- d-forwardinginterfaceNetworkPort: UserPort: 表6-1disy NetworkUserdisy <Sysname>disymac- d-forwardingvlan1VLAN1 表6-2disymac-d-forwardingvlan命令顯示信息描述VLAN網關IPVLAN網關IPMACServerIP 就需要指定缺省網關。undomac- d-forwarding命令用來關閉MFF功能。 如果配置的是自動方式，則需要保證DHCPSnoo的正常運行；如果配置的是手工方式，則需要保證ARPSnoo的正常運行。 的網絡（VLAN）IPDHCP報文中的Option字段解析獲取。[Sysname]vlan1 mac-d-forwardinggatewayprobeundomac-d-forwardinggatewayprobe無mac-d-forwardinggatewayprobe命令用來使能對MFF的網關進行定時探測，以便感網關的定時探測功能。undomac-d-forwardinggatewayprobe命令用來恢復缺省情況。需要注意的是，在配置 d-forwardinggatewayprobe命令之前需要使 [Sysname]vlan1 mac-d-forwardingnetwork-portundomac-d-forwardingnetwork-port無 命令用來配置端口為網絡端口。undomac-d-forwardingnetwork-port命令用于恢復缺省情況。 VLANMFF功能時，如果用戶想取消網絡端口的配置，則需要先將網絡端口從鏈路聚[Sysname]interfaceethernet undo mac-d-forwardingserver命令用來配置網絡中部署的服務器的IP地址。undomac-d-forwardingserverIP地址，不指定參數表示刪除所有的服務器IP地址。IPVRRPIPIP地址為服務 [Sysname]vlan1 1 1 1 2dhcp 3dhcpserverapplyip- 3dhcpselectserverglobal- 4dhcpserver 5 5dhcpserverip- 6dhcpserver 7dhcpserver 7dhcpserverrelayinformation 8dhcpupdatearp(forDHCP 9disydhcp 9disydhcpserver disydhcpserver- disydhcpserverforbidden- disydhcpserverip-in- disydhcpserver disydhcpserver - networkip network resetdhcp resetdhcpserverip-in- resetdhcpserver - tftp- - 1 1 1 2dhcprelayinformationcircuit-id 3dhcprelayinformation 3 4 5 6dhcprelayinformation 7dhcprelayrelease 8dhcprelaysecurity 9dhcprelaysecurityrefresh dhcprelaysecurity dhcprelayserver- dhcpselect dhcpupdatearp(forDHCP disydhcp disydhcprelay disydhcprelay disydhcprelaysecurity disydhcprelaysecurity disydhcprelayserver- disydhcprelay resetdhcprelay 1 1disy 1ipaddressdhcp- 3 1 1dhcp-snoo...................................................................................................................4-dhcp-snooinformationcircuit-idformat- 1dhcp-snooinformationcircuit-id 2dhcp-snooinformation 3dhcp-snooinformation 4 5dhcp-snooinformationremote-id 5dhcp-snooinformation 6dhcp-snoo 7disydhcp-snoo......................................................................................................4-disydhcp-snoo 9disydhcp-snoopacket disydhcp-snoo resetdhcp-snoo.......................................................................................................4-resetdhcp-snoopacket 1 1disy 1ipaddressbootp- 2H3CMSR系列路由器令支持情況說MSRMSRMSRMSRdhcpupdatedhcprelayaddress-dhcprelaysecurityinformationformatH3CMSR務器的subaddress地址池配置不能在串口、MP-group接口和Loopback接口上進行。bims-serveripip-address[portport-number]sharekey相關配置可參考命令dhcpserverip-pool和disydhcpservertree共享密鑰為aabbcc。[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]bims-serveripport80sharekeyundobootfile-bootfile-name命令用來配置DHCP地址池為DHCP客戶端分配的啟動文件名。undobootfile-name命令用來刪除DHCP地址池為DHCP客戶端分配的啟動文件名。相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-pooldhcpdhcpenable無缺省情況下，DHCP服務處于狀態。[Sysname]dhcpdhcpserverapplyip-dhcpserverapplyip-poolpool-undodhcpserverapplyip-pool[pool-namedhcpserverapplyip-pool命令用來配置接口擴展模式的地址池。undodhcpserverapplyip-pool命令用來取消接口的擴展模式地址池。池中選擇IP地址分配給客戶端。 用的擴展模式地址池中選擇IP地址分配給客戶端。 相關配置可參考命令dhcpserverip-pool。 dhcpselectserverglobal-pool[subaddressundodhcpselectserverglobal-pool地址分配給客戶端。如果接口有多個從IP地址，則從第一個從IP地址開始依次匹配。dhcpselectserverglobal-pool命令用來配置接口工作在DHCP服務器模式，即當接口收到DHCPDHCPDHCP服務器的地址池中分配地址。undodhcpselectserverglobal-poolsubaddress命令用來取消對從地址分配的支持。 [Sysname]interfaceethernet dhcpserverdhcpserverdetectundodhcpserverdetect無偽DHCP服務器檢測功能。DHCP服務器。 務器。管理員需要從日志信息中查找偽DHCP服務器。 <Sysname>system-view[Sysname]dhcpserverdetectundodhcpserverforbidden-iplow-ip-address[high-ip-address表示只有一個IP地址，即low-ip-address。serverforbidden-ip命令用來取消DHCP地址池中不參與自動分配的IP地址的配置。 dhcpserverforbidden-ipIP地址配置為不參與自動分配的地 undodhcpserverforbidden-ipIP地址的配置時，指定的地的配置，不能單獨取消其中某個IP地址的配置。 相關配置可參考命令disydhcpserverforbidden-ip、dhcpserverip-pool，network[Sysname]dhcpserverforbidden-ipdhcpserverip-dhcpserverip-poolpool-name[extendedundodhcpserverip-poolpool-地址池，則直接進入該地址池視圖。undodhcpserverip-pool命令用來刪除指定的地址池。缺省情況下，沒有創建DHCP地址池。<Sysname>system-view[Sysname]dhcpserverip-pool0dhcpserverdhcpserverpacketsundodhcpserverserverpackets命令用來恢復缺省情況。[Sysname]dhcpserverpacketsdhcpserverdhcpservertimeoutundodhcpserver操作。servertimeout命令用來恢復缺省情況。[Sysname]dhcpservertimeoutdhcpserverrelayinformationdhcpserverrelayinformationenableundodhcpserverrelayinformationenable無dhcpserverrelayinformationenableDHCPOption82。undodhcpserverrelayinformationenable命令用來配置DHCP服務器忽略O(shè)ption82。[Sysname]undodhcpserverrelayinformationdhcpupdatearp(forDHCPdhcpupdatearpundodhcpupdatearp無dhcpupdatearp命令用來配置DHCP服務器支持ARP功能。undodhcpupdatearp命令[Sysname]interfaceethernet1/1[Sysname-Ethernet1/1]dhcpupdatearpdisydhcpserverdisydhcpserver{all|ipip-addressdisydhcpserver 相關配置可參考命令resetdhcpserver。<Sysname>disydhcpserver DiscovertimeApr252007Apr252007---total2entry--表1-1disydhcpserver命令顯示信息描述發生的IP地disydhcpserverdisydhcpserverexpired{all|ipip-address|pool[pool-name]可用地址分配完后，這類租約超期的地址將被分配給DHCP客戶端。<Sysname>dis ydhcpserverexpiredallGlobalpool:IPaddress Leaseexpiration Hardwareaddress 3030-3066-2e65-3230-Apr252007 ---total1entry--表1-2disydhcpserverexpired命令顯示信息描述GlobalIP租約超期的IP租約超期的客戶端ID或MACLeasedisydhcpserver-disydhcp -無disydhcpserver-ip命令用來顯示DHCP地址池的可用地址信息，即尚未分配的IP地址<Sysname>disydhcp -IPRangefrom todisydhcpserverforbidden-disydhcpserverforbidden-無<Sysname>disydhcpserverforbidden-ipIPRangefrom toIPRangefrom toPoolname: 表1-3disydhcpserverforbidden-ip命令顯示信息描述dhcpserverforbidden-ip命令配置的不參與自動分配的IP地址，所有地址池都不可以分配這些IP地址Pool址，只有當前擴展模式的地址池不可以分配這些IP地址disydhcpserverip-in-disydhcpserverip-in-use{all|ipip-address|pool[pool-name]disydhcpserverip-in-use命令用來顯示DHCP地址池中的地址綁定信息。相關配置可參考命令resetdhcpserverip-in-use。<Sysname>disydhcpserverip-in-useallGlobalpool:IPaddress Hardware

Lease NOT ---total1entry--表1-4disydhcpserverip-in-use命令顯示信息描述GlobalIP綁定的IP綁定的客戶端IDMACLeaseNOTUsedUnlimited地址綁定的類型，包括ManualAuto:OFFERED和 Manual disydhcpserverdisydhcpserver無disydhcpserverstatistics命令用來顯示DHCP服務器的統計信息。相關配置可參考命令resetdhcpserverstatistics。<Sysname>disydhcpserverstatisticsGlobalPool:Pool1100BOOTP530200BOOTP63300Bad0表1-5disydhcpserverstatistics命令顯示信息描述GlobalPool自動綁定的IP手工綁定的IP租約超期的IPBOOTPBOOTPBaddisydhcpserverdisydhcpservertree{all|pool[pool-name]<Sysname>disydhcpservertreeallGlobalpool:Poolname:networkmaskSiblingnode:1option2ip-addressexpired10Poolname:static-bindip-addressmaskstatic-bindmac-address00e0-00fc-0001PrevSiblingnode:0expiredExtendedPoolname:networkiprangenetworkmaskexpired00表1-6disydhcpservertree命令顯示信息描述GlobalPoolstatic-bindip-addressmask靜態綁定的IPMACChildnode：此節點的子節點（子網）Parentnode：此節點的父節點（自然網段）Siblingnode：此節點的下一個兄弟節點（同一自然網段的其PrevSiblingnodeExtendednetworkip擴展模式地址池可分配的IPnetwork擴展模式地址池分配的IPundodns-list{ip-address|all令用來刪除DHCP地址池為DHCP客戶端分配的DNS服務器地址。相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-pool-

- -

-缺省情況下，沒有配置DHCP地址池為DHCP客戶端分配的后綴。相關配置可參考命令dhcpserverip-pool和disydhcpservertree。 [Sysname]dhcpserverip-pool0 expired{dayday[hourhour[minuteminute]]|unlimitedundohourhour：指定租約過期的小時數，hour取值范圍為0～23。unlimited：有效期限為無限長（實際上系統限定約為136年）。相關配置可參考命令dhcpserverip-pool和disydhcpservertree。[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]expiredday1hour2minuteforbidden-undoforbidden-ip{ip-address&<1-8>|all每個IP地址之間用空格分隔。 只有當前擴展模式的地址池不能分配這些IP地址，其他地址池仍然可以分配這些IP地址。 #[Sysname]dhcpserverip-pool0undogateway-list{ip-address|allgateway-listDHCPDHCP客戶端分配的網關地址。undogateway-相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-poolundonbns-list{ip-address|all[Sysname]dhcpserverip-poolnetbios-type{b-node|h-node|m-node|p-nodeundonetbios-netbios-typeDHCPDHCPNetBIOS節點類型。undonetbios-type命令用來刪除DHCP地址池為DHCP客戶端分配的NetBIOS節點類型。[Sysname]dhcpserverip-poolnetworknetwork-address[mask-length|maskmaskundonetworkDHCPIP地址范圍。undonetwork命令用來刪除動態分配的IP地址范圍。相關配置可參考命令dhcpserverip-pool和disydhcpservertree#[Sysname]dhcpserverip-poolnetworkipnetworkiprangemin-addressmax-undonetworkip 相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-pool0[Sysname-dhcp-pool-0]networkiprangenetworknetworkmaskundonetwork用來刪除動態分配的IP地址掩碼。 IP[Sysname]dhcpserverip-pool0extended[Sysname-dhcp-pool-0]networkmaskoptioncode{asciiascii-string|hexhex-string&<1-16>|ip-addressip-address&<1-8>undooption池的DHCP自定義選項。相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]option100hex11resetdhcpresetdhcpserver{all|ipip-addressresetdhcpserver命令用來清除DHCP地址的統計信息。相關配置可參考命令disydhcpserver。#清除全部地址統計信息<Sysname>resetdhcp resetdhcpserverip-in-resetdhcpserverip-in-use{all|ipip-address|pool[pool-name]相關配置可參考命令disydhcpserverip-in-use。<Sysname>resetdhcpserverip-in-useipresetdhcpserverresetdhcpserver無相關配置可參考命令disydhcpserverstatistics。<Sysname>resetdhcpserverstatic-bind-static-bind-identifier-undostatic-bind-

制數。例如：aabb-cccc-dd為有效的ID，aabb-c-ddddaabb-cc-dddd為無效的ID。static-bind-identifier命令用來配置DHCP地址池中靜態綁定的客戶端ID。undostatic-bind-identifier命令用來刪除DHCP地址池中靜態綁定的客戶端ID。 態綁定的客戶端ID和IP地址。 IDIP disydhcpservertree和disydhcp #[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]static-bindip-addressmask[Sysname-dhcp-pool-0]static-bind -identifieraaaa-bbbbstatic-bindip-addressip-address[mask-length|maskmaskundostatic-bindip-static-bindip-addressDHCPIP地址。undostatic-bindip-address命令用來刪除DHCP地址池中靜態綁定的IP地址。 命令必須與static-bind 或static-bind-identifier命令配合使用，分別配置靜態綁定的IP地址和MAC地址或客戶端ID。 客戶端將無法正常獲取到IP地址。 相關配置可參考命令dhcpserverip-pool、static-bind-identifier、static-bindmac-address和disydhcpservertree。[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]static-bindip-addressmask[Sysname-dhcp-pool-0]static-bindmac-address0000-e03f-0305mac-address命令用來刪除DHCP地址池中靜態綁定的MAC地址。 綁定的MAC地址和IP地址。 和disydhcpservertree[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]static-bindip-addressmask[Sysname-dhcp-pool-0]static-bindmac-address0000-e03f-0305tftp- -tftp-server-name-undotftp-server-

-name命令用來配置DHCP地址池為DHCP客戶端分配的TFTP服務器名。undotftp-server -name命令用來刪除DHCP地址池為DHCP客戶端分配的TFTP服務器相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-pool -nametftp-serverip-tftp-serverip-addressDHCPDHCPTFTP服務器地址。相關配置可參考命令dhcpserverip-pool和disydhcpservertree[Sysname]dhcpserverip-poolvoice-config{as-ipip-address|fail-overip-addressdialer-string|ncp-ipip-addressvoice-vlanvlan-id{disable|enable}undovoice-config[as-ip|fail-over|ncp-ip|voice-vlan disable：指定VLAN處于狀態，即DHCP客戶端不會將所指定的VLANID作為語 voice-config命令用來配置DHCP地址池為DHCP客戶端分配的Option184內容。undovoice-configDHCPDHCP客戶端分配的Option184內容。需要注意的是，在配置其它參數前必須先配置ncp-ip，否則其它參數不生效。相關配置可參考命令dhcpserverip-pool和disydhcpservertree。叫字符串為99*。[Sysname]dhcpserverip-pool[Sysname-dhcp-pool-0]voice-configncp-ip[Sysname-dhcp-pool-0]voice-configas-ip[Sysname-dhcp-pool-0]voice-configvoice-vlan3enabledhcprelayaddress-check{disable|enabledhcprelayaddress-checkDHCP中繼的地址匹配檢查功能。缺省情況下，DHCP中繼的地址匹配檢查功能。項，則該主機將不能通過DHCP中繼外部網絡。 [Sysname]interfaceethernet dhcprelayinformationcircuit-idformat-type{ascii|hexundodhcprelayinformationcircuit-id