鍵盤數碼管實驗報告

TinyHMI電路設計與制作實驗報告實驗?zāi)康模哼\(yùn)用AD畫出TinyHMI原理圖，PCB圖。最終制作出一個由兩個74HC595同步串轉并方式輸出的八位按鍵數碼管板；學會級聯實驗原理：TinyHMI數碼管與鍵盤驅動電路，它通過單片機I/O口控制2個74HC595來驅動兩個共陰極LN3461AS數碼管與8個按鍵。其中，U20控制八個數碼管的位選位，U21控制八個數碼管的段選位；給數碼管的位選位輸入低電平，段選位輸送高電平，即可點亮數碼管。74HC595工作原理：74HC595內置的移位寄存器與的工作原理，在CP上升沿的作用下，將D端的二進制數據依次送入移位寄存器中。數據移位完成后，在STR上升沿的作用下，將移位寄存器的數據一次性送入數據存儲鎖存器輸出，從而保證在移位的過程中，輸出端的數據保持不變。原理圖如下圖所示：TinyHMI原理圖PCB圖如下圖所示：實驗內容:用2個74HC595來驅動兩個共陰極LN3461AS數碼管與8個按鍵實驗程序：#include<reg51.h>#include<intrins.h>#defineucharunsignedchar#defineuintunsignedint#defineFOSC11059200ul#defineT0_H(65536-(20*FOSC/(12*100000)))/256#defineT0_L(65536-(20*FOSC/(12*100000)))%256sbitSDA=P1^0;//數據端sbitSCP=P1^1;//脈沖sbitSTR=P1^2;//鎖存sbitanjian=P1^3;//按鍵端ucharduanma[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};ucharweima[]={0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe};ucharflag=0;ucharcount=0;ucharj;voidinitSys();voidshuchu();voidshuru(ucharucdata);voidanjianxuanze(void);voidmain(){uchari;initSys();while(1){if(flag==1){flag=0;while(j==0){anjianxuanze();}if(j!=0){for(i=0;i<=7;i++){shuru(duanma[j]);shuru(weima[i]);shuchu();//動態掃描20ms進中斷視覺效果所以只顯示選通端}j=0;}}}}voidinitSys(){TMOD=(TMOD&0xf0)|0x01;TH0=T0_H;TL0=T0_L;EA=1;TR0=1;ET0=1;}voidtimer0()interrupt1/*中斷*/{TH0=T0_H;TL0=T0_L;count++;if(count==10){count=0;flag=1;}}voidshuru(ucharucdata)/*串行輸入*/{uchari,uctmp;uctmp=ucdata;for(i=0;i<8;i++){SCP=0;if((uctmp&0x80)==0)SDA=0;elseSDA=1;SCP=1;uctmp=uctmp<<1;}}voidshuchu(void)/*并行輸出*/{STR=0;STR=1;}voidanjianxuanze(void){uchari;for(i=0;i<=7;i++){shuru(0x00);s