民用客機(jī)通信傳輸總線簡介

1、arinc429 data bus mark 33 dits introduction the purpose of the serial interface, or arinc system as it is more commonly called, is to provide data in serial format for , such as , and . the serial data format conforms to the arinc 429 specifications, which offer a for data interchange between equipm

2、ent produced by . objective understand the concept and the basic definitions of the arinc 429 standard. differentiate the different ways arinc-429 interfaces with cockpit instrument and avionic equipment. describe the functionality of every component in the arinc-429 interfacing system. familiarizat

3、ion with arinc-429 transmit and receive circuit. aircraft arinc-429 communication arinc 429 data buses an arinc 429 bus (channel) consists of a single twisted shielded wire pair (tswp), with wire a of slate color and wire b of white color. the shield of the tswp must be grounded at each end and at a

4、ll junctions along the transmission bus. arinc 429 buses are unidirectional and transfer serial data in arinc 429 format from a transmitter to a receiver. with bi-directional transmission we will use 2 separate channels or buses. a transmitter could talk to a number of receivers (max. 20) on one bus

5、. each receiver will have to monitor the receiving line for applicable data, it do not have to acknowledge the reception of the data. the arinc data buses must be identified by name, e.g., wxrcp, cducl, vhfl1, etc. arinc 429 signal characteristics a data bit of 1 consists of a high period followed b

6、y a null period. a data bit of “0 consists of a low period followed by a null period. there are two signal transmission rates: low speed of 12.5 kbits/s, and high speed of 100.0 kbits/s. an arinc 429 bus must carry data of the same speed, either low or high. a single arinc 429 bus may carry many ari

7、nc 429 words, each containing different data. consecutive arinc 429 words must be separated by a time of at least four null periods. arinc word format arinc label arinc label source/destination identifier (sdi) sdi multiple sources sdi multiple sources sign/status matrix (ssm) sign/status matrix (ss

8、m) parity parity parity parity parity data encoding nfive groups: i a y data (bnr) inary- oded- ecimal data (bcd) crete data (dis) nmaintenance n“ cknowledgement”, so alphabet no.5 and aintenance data (aim) data type: binary bnr spec. arinc-429 - bnr data table data type: binary coded decimal bcd spec. arinc-429 - bcd data table dat