任意發送天線,任意接收天線的stbc-mimo-ofdm的matlab程序（Matlab program of arbitrary transmit antenna and arbitrary receiving antenna stbc-mimo-ofdm）

1、任意發送天線,任意接收天線的stbc-mimo-ofdm的matlab程序（matlab program of arbitrary transmit antenna and arbitrary receiving antenna stbc-mimo-ofdm）clear all;i = sqrt (- 1);ifft _ bin _ length = 512% 傅立葉變換抽樣點數目;carrier _ count = 100% 子載波數目;_ symbols per _ carrier = 66% 符號數 / 載波;_ cp length = 10;% 循環前綴長度_ addprefix le

2、ngth = ifft _ bin _ length + cp _ length;_ psk m = 4;_ _ bits per symbol = log2 (m _ psk / 符號 位數%);% 1 - 2 = 2; 1 + j + j;% alamouti scheme x1 x2 - x1; x2 * * 二天線發送矩陣or - 1 - 2 = j 1 + 2 + 3; 3 + j j 0; 0 + 1 0 - 3 j; j + j + 2% ; for x1 - x2 - x1 x2 x3; * * * * x3 x1 0; 0; 0 - x3 x2 三天線發送矩陣 * *co _

3、 time = size (o (1);nt = size (or, 2);% 發射天線數目nr = 2% 接收天線數目;num _ x = 1;for cc _ ro = 1: co _ timefor cc _ co = 1: ntnum _ x = max (abs (_ x num, real (or (cc _ ro, cc _ co);endendco _ x = zeros (_ x num, 1);for _ ro = 1: co _ time% 計算delta, epsilon eta and conj matricesfor _ co = 1: nt% 用于確定矩陣 or

4、中元素的位置, 符號以及共軛情況if abs (real or _ ro, with _ co) = 0delta (with _ ro, abs (real or _ ro, with _ co sign (=) (real or _ ro, with _ co);epsilon (_ ro, abs (real or _ ro, with _ co) = _ co;co _ (abs (x (real or _ ro, with _ co), x (1) = abs (co _ real (or (_ ro, with _ co) + 1), 1);eta (abs (real or _

5、ro, with _ co), co _ (abs) x (real or _ ro, with _ co), 1) = _ ro;the _ mt (with _ ro, abs (real or _ ro, with _ co) (or = imag (_ ro, with _ co);endendendeta = eta. ;eta = sort (eta);eta = eta. ;carriers = (1: carrier _ count (floor) + (ifft _ bin _ length / 4) - floor (carrier _ count / 2);% 坐標: (

6、1 to 100) + 14 = (15: 114)conjugate _ carriers = length ifft _ bin _ carriers + 2; 256 (15% 坐標: 114) + 1 = 257 - (15: 114) = (242: 143)tx_training_symbols = training_symbol（新臺幣，carrier_count）；baseband_out_length = carrier_count * symbols_per_carrier；snr_min = 3；%最小信噪比snr_max = 15；%最大信噪比graph_inf_bit

7、 =零（snr_max-snr_min + 1,2，nr）；%繪圖信息存儲矩陣graph_inf_sym =零（snr_max-snr_min + 1,2，nr）；對于信噪比為snr_min：snr_max %開始仿真中圖分類號disp（等待直到snr = ）；disp（snr_max）；信噪比n_err_sym =零（1，nr）；n_err_bit =零（1，nr）；perr_sym =零（1，nr）；perr_bit =零（1，nr）；re_met_sym_buf =零（carrier_count，symbols_per_carrier，nr）；re_met_bit =零（baseband

8、_out_length，bits_per_symbol，nr）；baseband_out =圓（rand（baseband_out_length，bits_per_symbol）；%生成隨機數用于仿真de_data =轉化（baseband_out）；%二進制向十進制轉換data_buf = pskmod（de_data，m_psk，0）；% psk調制carrier_matrix =重塑（data_buf，carrier_count，symbols_per_carrier）；tt = 1：nt：symbols_per_carrier %取數為空時編碼做準備，此處每次取每個子載波上連續的兩個數

9、數據 ；對于ii = 1：nttx_buf_buf = carrier_matrix（：，tt + ii-1）；數據= 數據；tx_buf_buf ；結束xx =零（co_time * carrier_count，nt）；對于con_r = 1：co_time %進行空時編碼對于con_c = 1：nt如果abs（房（o（con_r，con_c） = 0如果圖像（o（con_r，con_c）= = 0xx（con_r-1）* carrier_count + 1：con_r * carrier_count，con_c）=數據（abs（房（o（con_r，con_c）- 1）* carrier_c

10、ount + 1：abs（房（o（con_r，con_c）* carrier_count，1）*號（房（o（con_r，con_c）；其他的xx（con_r-1）* carrier_count + 1：con_r * carrier_count，con_c）=連詞（數據（abs（房（o（con_r，con_c）- 1）* carrier_count + 1：abs（房（o（con_r，con_c）* carrier_count，1）*號（房（o（con_r，con_c）；結束結束結束空時編碼結束結束%xx = tx_training_symbols；xx ；%添加訓練序列rx_buf =零（1

11、，addprefix_length *（co_time + 1），nr）；對于轉速= 1：nr對于ii = 1：nttx_buf =重塑（xx（：，ii），carrier_count，co_time + 1）；ifft_tx_buf =零（ifft_bin_length，co_time + 1）；ifft_tx_buf（載體，：）= tx_buf（1：carrier_count，：）；ifft_tx_buf（conjugate_carriers，：）=連詞（tx_buf（1：carrier_count，：）；time_matrix = ifft（ifft_tx_buf）；time_matrix

12、 = time_matrix（ifft_bin_length-cp_length + 1）：ifft_bin_length，：）；time_matrix ；tx = time_matrix（：）”；% -%d = randint（1,4， 1 ）；% 4多經信道模擬% =（1，randint 2,7）/ 10；tx_tmp = tx；a 4,5,6,2；4,5,6,2；4,5,6,2；4,5,6,2 ；a 0.2,0.3,0.4,0.5；0.2,0.3,0.4,0.5；0.2,0.3,0.4,0.5；0.2,0.3,0.4,0.5 ；對于jj = 1：大?。╠，2）復制=零（大?。╰x）；對于

13、kk = 1 + d（ii，jj）：長度（德克薩斯州）復制（kk）= a（ii，jj）* tx（kk - d（ii，jj）；結束tx_tmp = tx_tmp +復制；結束% -txch = awgn（tx_tmp，信噪比，測量不添加高斯白噪聲）；%rx_buf（1，：，rev）= rx_buf（1，：，rev）+ txch；結束rx_spectrum =重塑（rx_buf（1，：，rev），addprefix_length，co_time + 1）；rx_spectrum = rx_spectrum（cp_length + 1：addprefix_length，：）；fft_tx_buf =

14、零（ifft_bin_length，co_time + 1）；fft_tx_buf = fft（rx_spectrum）；spectrum_matrix = fft_tx_buf（載體，：）；y_buf =（spectrum_matrix（：，2：co_time + 1）；y_buf =連詞（y_buf”）；spectrum_matrix1 = spectrum_matrix（：，1）；周= exp（2/ carrier_count）*我）；l10；p = 0（l * nt，1）；對于jj = 1：ntl = 0：l-1kk = 0：carrier_count-1p（l +（jj-1）l +

15、1）= p（l +（jj-1）l + 1）+ spectrum_matrix1（kk + 1）*連詞（tx_training_symbols（kk + 1，jj）*周（-（kk * l）；結束結束結束% =零（l *，新）；% for ii = 1: nt% jj = 1: nt% of l1 = 0: l - 1% of l2 = 0: l - 1% of kk = 0: carrier _ count - 1% q (l2 + (ii, 1) * l + 1, l1 + (jj - 1) * l + 1) = q (l2 + (ii, 1) * l + 1, l1 + (jj - 1) *

16、 l + 1) + tx _ training _ symbols (kk + 1 (ii) * conj (tx _ training _ symbols (tn + 1, jj) * wk (- (kk * (l1 + l2);% than% than% than% than% than% h = inv (q) * p;h = p / carrier _ count;h _ buf = zeros (carrier _ count, nt);ii = 1: ntct = 0: carrier _ count - 1for l = 0: l - 1h _ buf (tn + 1, (ii)

17、 = h _ buf (tn + 1, (ii) + h (l + (ii, 1) * l + 1,1) * wk (kk * l);thanthanthanh _ buf = conj (h _ buf );rac = ;ct = 1: carrier _ county = y _ buf (kk);h = h _ buf (kk);for co _ ii = 1: num _ xfor co _ tt = 1: size (eta 2)if eta (co _ ii, co _ tt = 0)if confirmed _ mt (eta (co _ ii, co _ tt), co _ i

18、i) = = 0r _ (eta (co _ ii, co _ tt): co _ ii) = y (eta (co _ ii, co _ tt):);a _ (eta (co _ ii, co _ tt): co _ ii) = conj (h (epsilon (eta (co _ ii, co _ tt), co _ ii):);elser _ (eta (co _ ii, co _ tt): co _ ii) = conj (y (eta (co _ ii, co _ tt):);a _ (eta (co _ ii, co _ tt): co _ ii) = h (epsilon (e

19、ta (co _ ii, co _ tt), co _ ii):);thanthanthanthanrr = zeroes (num _ x 1);for iii = 1: num _ x% generate decision statistics of the transmitted signal xifor iii = 1: size (eta 2)if eta (iii, iii) = 0rr (iii, 1) = rr (iii, 1) + r _ (eta (iii, iii) 1, (iii) * (a _ (eta (iii, iii) 1, (iii) * delta (eta

20、 (iii, iii) (iii);thanthanthanrac = rrr; conj (rr);thanr _ symbols = pskdemod (rrr, m _ bank, 0);re _ met _ symbols _ buf (: tt: tt + nt 1 rev) = r _ symbols;thanthanre _ met _ symbols = zeroes (baseband _ out _ length, 1 point);for rev = 1: nore _ met _ symbols _ buf _ buf = u.a. _ met _ symbols _

21、buf (:,:, rev);re _ met _ symbols (:, 1 rev) = re _ met _ symbols _ buf _ buf (:);re _ met _ bits (:,:, rev) = de2bi (re _ met _ symbols (:, 1 rev);for con _ dec _ ro = 1: baseband _ out _ lengthif re _ met _ symbols (con _ dec _ ro, 1 rev) = the _ data (con _ dec _ ro, 1)n _ err _ symbols (1, rev)

22、= n _ err _ symbols (1w + 1);for a _ dec _ co = 1 bit per symbol _ _if a bit is _ _ (_ dec _ ro, _ dec _ co., rev = baseband _ out (_ dec _ ro, _ dec _ co.)i n _ _ bit (1 rev) = n _ in _ bit (1) + 1).endendendendgraph _ inf _ sym (snr snr _ min + 1.1, p = snr.graph _ inf _ bit snr snr _ min + 1.1, p

23、 = snr.perr _ sym (1) = n _ in _ sym (1) / (baseband _ out _ length);% count number of error bits and symbolsgraph _ inf _ sym (snr snr _ min 1.2 rev = sym (perr _, rev.);perr _ bit (1, p) = n _ in _ bit (1) / (baseband _ out _ length * bits per symbol _ _).graph _ inf _ bit snr snr _ min 1.2 rev) p

24、err _ bit (1, 1).endendfor w = 1: 1x x x x x x x _ sym = sym (figure _ inf _: 1, rev.% this plotthere _ sym = graph _ inf _ sym (:, 2 rev.);subplot (nr) 1 rev).semilogy (x _ _ sym sym, k - 1).axis (2, 16 0.0001).xlabel (snr) db.ylabel (symbol error probability.grid onper cent hold onendper cent hold off% for rev = 1: 1x _ bit = graph _ inf _ bit: 1, rev.);% _ bit = graph _ inf _ bit (:, 2 rev.);% subplot (2,1,2).% semilogy (x _ _ bit, bit, k - 1).axis (16) 0.0001 1).) xlabel (snr) db.% ylabel (bit error probability).grid