電路與電子技術(shù)：Chapter-10 Diodes

1、Chapter 10DiodesChapter 10Diodes1. Understand diode operation and select diodes for various applications.2. Analyze nonlinear circuits using the graphical load-line technique.3. Analyze and design simple voltage regulator circuits.4. Solve circuits using the ideal-diode model and piecewise-linear mo

2、dels.5. Understand various rectifier and wave shaping circuits.6. Understand small-signal equivalent circuits.Shockley Equation1expTDsDnVvIiqkTVTk = 1.38 1023 J/K is Boltzmanns constant and q = 1.60 1019 C is the magnitude of the electrical charge of an electron. At a temperature of 300 K, we have m

3、V 26TVZener DiodesDiodes that are intended to operate in the breakdown region are called Zener diodes.LOAD-LINE ANALYSIS OF DIODE CIRCUITSDDSSvRiVZENER-DIODE VOLTAGE-REGULATOR CIRCUITSA voltage regulator circuit provides a nearly constant voltage to a load from a variable source.0DDSSvRiVLoad-Line A

4、nalysis of Complex CircuitsIDEAL-DIODE MODELThe ideal diode acts as a shortcircuit for forward currentsand as an open circuit withreverse voltage applied.Assumed States for Analysis of Ideal-Diode Circuits1. Assume a state for each diode, either on (i.e., a short circuit) or off (i.e., an open circu

5、it). For n diodes there are 2n possible combinations of diode states.2. Analyze the circuit to determine the current through the diodes assumed to be on and the voltage across the diodes assumed to be off.3. Check to see if the result is consistent with the assumed state for each diode. Current must

6、 flow in the forward direction for diodes assumed to be on. Furthermore, the voltage across the diodes assumed to be off must be positive at the cathode (i.e., reverse bias).4. If the results are consistent with the assumed states, the analysis is finished. Otherwise, return to step 1 and choose a d

7、ifferent combination of diode states.PIECEWISE-LINEAR DIODE MODELSaaViRvrLVTIC 2rmLVVVPeak Inverse VoltageAn important aspect of rectifier circuits is the peak inverse voltage (PIV) across the diodes.rLVTIC2The capacitance required for a full-wave rectifier is given by:LINEAR SMALL-SIGNAL EQUIVALENT

8、 CIRCUITSThe small-signal equivalentcircuit for a diode is a resistance.DQDDDvdvdii1QDDddvdirdddrvi Notation for Currents and Voltages in Electronic Circuits vD and iD represent the total instantaneous diode voltage and current. At times, we may wish to emphasize the time-varying nature of these quantities, and then we use vD(t) and iD(t) VDQ and IDQ represent the dc diode current and voltage at the quie