《設備的安全防護》PPT課件

1、Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有在所有旋轉或移動的部件上安裝護罩旋轉或移動的部件上安裝護罩Proper guarding on moving component.在旋轉部件上設置的正確護罩在旋轉部件上設置的正確護罩-Chains鏈條-Collars軸-Couplings接合器-Blades刀具-Pulleys-Shafts傳動桿-Other Rotating or Moving Parts其它移動或旋轉設備HAZARD ASSESSMENT

2、 - Machine Guarding 011;.Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有在所有旋轉或移動的部件上安裝護罩旋轉或移動的部件上安裝護罩Proper guarding on rotating component.在旋轉部件上設置的正確護罩在旋轉部件上設置的正確護罩No guarding on chain drive.在鏈條上沒有護罩在鏈條上沒有護罩HAZARD ASSESSMENT - Machine Guarding 022;.Pro

3、per guarding on rotating component.在旋轉部件上設置的正確護罩在旋轉部件上設置的正確護罩No guarding on pulley.在滑輪上沒有護罩在滑輪上沒有護罩HAZARD ASSESSMENT - Machine Guarding 03Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有在所有旋轉或移動的部件上安裝護罩旋轉或移動的部件上安裝護罩3;.Proper Guarding正確的護罩正確的護罩No guarding

4、 on coupling.接合器上沒有護罩接合器上沒有護罩HAZARD ASSESSMENT - Machine Guarding 04Full enclosure or adjustable guarding must be provided around all rotating or moving parts.在所有在所有旋轉或移動的部件上安裝護罩旋轉或移動的部件上安裝護罩4;.Guarding must extend around the back side of rotating or moving parts.旋轉或移動的部件反面也要旋轉或移動的部件反面也要有護罩保護有護罩保護Pr

5、oper Guarding正確的護罩正確的護罩No guarding on the back side of the pulley.滑輪的反面的沒有護罩保護滑輪的反面的沒有護罩保護HAZARD ASSESSMENT - Machine Guarding 055;.Proper guarding around back sideof moving components.正確的護罩正確的護罩-保護到運動部件的后面保護到運動部件的后面No guarding on the back side of the drive.運動部件的后側沒有護罩運動部件的后側沒有護罩HAZARD ASSESSMENT -

6、Machine Guarding 06Guarding must extend around the back side of rotating or moving parts.旋轉或移動的部件反面也要旋轉或移動的部件反面也要有護罩保護有護罩保護6;.Deflection guards must be provided on machinery with the potential to project chips, particles, sparks or kickbacks.對于那些在運轉時有可能產生碎片，顆粒物，火花或其它后果的機器，必須設對于那些在運轉時有可能產生碎片，顆粒物，火花或其

7、它后果的機器，必須設置防護罩置防護罩Proper Guarding Grinder正確的護罩正確的護罩-砂輪機砂輪機Proper Guarding Machine正確的護罩正確的護罩機器機器HAZARD ASSESSMENT - Machine Guarding 077;.Machine guards must be maintained in a clean and proper working condition.機器的護罩必須維護在機器的護罩必須維護在整潔和正常工作的狀態整潔和正常工作的狀態Proper Guarding正確的護罩正確的護罩HAZARD ASSESSMENT - Mach

8、ine Guarding 088;.Machine guards must not be modified to defeat the total protection of the guard.不能隨意對機器護罩不能隨意對機器護罩加以改造，以致影響到護罩的整體防護功能加以改造，以致影響到護罩的整體防護功能Improperly modified guard.不正確改造的護罩不正確改造的護罩Too Large開口太大開口太大HAZARD ASSESSMENT - Machine Guarding 099;.Machine guards must be properly adjusted for

9、the machine.機器護罩必須被正確調節機器護罩必須被正確調節Improperly adjusted guard.不正確調節的護罩不正確調節的護罩HAZARD ASSESSMENT - Machine Guarding 1010;.Fixed machine guards must be properly secured in place.固定式機器護罩必須正確地安裝在機器上固定式機器護罩必須正確地安裝在機器上Guard not properly in place.護罩沒有正確地安裝在位置上護罩沒有正確地安裝在位置上Guard missing from side of machine.護

10、罩的一側被拿走護罩的一側被拿走MissingHAZARD ASSESSMENT - Machine Guarding 1111;.Power presses must have appropriate control devices to prevent the operator from placing their hands into the machine during operation.沖壓設備必須有適合的控制設施來防止操作者在操作時將沖壓設備必須有適合的控制設施來防止操作者在操作時將手放在機器內手放在機器內Light Curtain光簾光簾Control Devices:-Two-

11、Handed Tripping Devices-Light Curtains-Restraints-Barriers控制設施:-兩只手操作的裝置-光簾-抑制-屏障HAZARD ASSESSMENT - Machine Guarding 1212;.Two-handed tripping device.兩只手控制的裝置兩只手控制的裝置HAZARD ASSESSMENT - Machine Guarding 13Power presses must have appropriate control devices to prevent the operator from placing their

12、 hands into the machine during operation.沖壓設備必須有適合的控制設施來防止操作者在操作時將沖壓設備必須有適合的控制設施來防止操作者在操作時將手放在機器內手放在機器內13;.No guard preventing entry into sides of the press.沒有防護設備妨止從側面進入沖壓設備沒有防護設備妨止從側面進入沖壓設備Plexiglass barrier guard around all sides of the press.有機玻璃屏障置于沖壓設備周圍有機玻璃屏障置于沖壓設備周圍HAZARD ASSESSMENT - Machin

13、e Guarding 14Power presses must have appropriate control devices to prevent the operator from placing their hands into the machine during operation.沖壓設備必須有適合的控制設施來防止操作者在操作時將沖壓設備必須有適合的控制設施來防止操作者在操作時將手放在機器內手放在機器內14;.Abrasive wheel grinders must have appropriately adjusted tool rests and tongue guards.

14、砂輪機必須砂輪機必須有正確的可調節的靠墊和舌形的護罩有正確的可調節的靠墊和舌形的護罩Properly adjusted grinder guard.正確調節的砂輪機護罩正確調節的砂輪機護罩HAZARD ASSESSMENT - Machine Guarding 1515;.Tool rest improperly adjusted.靠墊的間距調節不正確靠墊的間距調節不正確.No tool rest, tongue guard or side guard.沒有靠山，舌形的護罩，側面的護罩沒有靠山，舌形的護罩，側面的護罩HAZARD ASSESSMENT - Machine Guarding 16

15、Abrasive wheel grinders must have appropriately adjusted tool rests and tongue guards.砂輪機必須砂輪機必須有正確的可調節的靠墊和舌形的護罩有正確的可調節的靠墊和舌形的護罩16;.Guards for machines with rotating or turning blades must be properly adjusted to cover the exposed portion of the blade.有旋轉刀片的機器的護罩必須被正確的調節，以蓋住刀片的暴露部分有旋轉刀片的機器的護罩必須被正確的調

16、節，以蓋住刀片的暴露部分Open side to band saw blade.鋸條的護罩一側被打開鋸條的護罩一側被打開Properly adjusted band saw guardto stock height.正確調節的鋸條護罩的高度正確調節的鋸條護罩的高度HAZARD ASSESSMENT - Machine Guarding 1717;.Guards must be provided over foot activated control pedals to prevent inadvertent activation.對于可對于可被腳打開的控制開關，必須安裝護罩，以防止腳無意中開啟

17、設備被腳打開的控制開關，必須安裝護罩，以防止腳無意中開啟設備Covered foot pedal.包住上面的腳踏開關包住上面的腳踏開關Covered foot pedal.包住上面的腳踏開關包住上面的腳踏開關HAZARD ASSESSMENT - Machine Guarding 1818;.Permanent equipment must be properly secured in place.永久使用的設備必須在工作場所安全的放永久使用的設備必須在工作場所安全的放置置Drill press not secured in place.鉆床放置在不安全的現場鉆床放置在不安全的現場Grinde

18、r not secured in place.砂輪機放置在不安全的地點砂輪機放置在不安全的地點HAZARD ASSESSMENT - Machine Guarding 1919;.Automatic machine guards must be properly functioning and not altered or modified.自動的機器護自動的機器護罩必須運轉正常，不能被改變罩必須運轉正常，不能被改變Properly functioning light curtain.正確運轉的光簾正確運轉的光簾Modified light curtain with tape on botto

19、m half.被改變的光簾在下半部有帶子被改變的光簾在下半部有帶子HAZARD ASSESSMENT - Machine Guarding 2020;.Properly functioning interlock.正確運轉的互鎖裝置正確運轉的互鎖裝置Malfunctioning door interlock.有故障的門的互鎖有故障的門的互鎖HAZARD ASSESSMENT - Machine Guarding 21Automatic machine guards must be properly functioning and not altered or modified.自動的機器護自動

20、的機器護罩必須運轉正常，不能被改變罩必須運轉正常，不能被改變21;.Emergency stop buttons must be properly labeled and color coded.應急停止按鈕必須被正確的標識應急停止按鈕必須被正確的標識出，并且有色標出，并且有色標Emergency stop button.應急停止按鈕應急停止按鈕Emergency stop button.應急停止按鈕應急停止按鈕HAZARD ASSESSMENT - Machine Guarding 2222;.Emergency stop buttons must be properly positioned and functioning on machines.應急停止按鈕必應急停止按鈕必須在正確地安裝在機器上，并且能正常