防火石膏板隔墻施工方案

1、防火石膏板隔墻施工方案-1JXXY20130812 完整（完整版資料，可直接使用可編輯，推薦下載）A1 three layer fireproof gypsum board wallA1三層防火石膏板隔墻Construction scheme 施工方案Organizer: wang jing 編制人 ： 王 靜審核人：Auditor ：Date ： 2021 08-16日 期： 20210816Fire preve nti on board partiti on wall con struct ion pla n防火板隔墻施工方案1. scope of applicati on適用范圍This

2、 chapter is applicable to in dustrial and civil con struct ion of light steel keel man made board partitio n in stallati on project.本章適用于工業與民用建筑中輕鋼龍骨人造板隔墻安裝工程2。 Preparati on of reference sta ndards and specificati ons編制參考標準及規范(1 )中華人民共和國國家標準GB50210- 2001建筑裝飾裝修工程質量驗收規范(2) 中華人民共和國國家標準GB50300- 2001建筑工程

3、施工質量驗收統一標準(3) 中華人民共和國國家標準GB50325-2001民用建筑工程室內環境污染控制規范 中華人民共和國國家標準GB50326-2001建設工程項目管理規范(5)重慶市建筑工程施工安全操作規程DCQ062 2002(6)建筑安裝分項工程施工工藝規程DCQ0 J 26 - 96。3. Terms, symbols 術語、符號(1) Han dover In spection 交接檢驗The un dertak ing by the con struct ion side and complete exam in ati on by both partiesand can con

4、tinue to make construction activities identified.由施工的承接方與完成方經雙方檢查并對可否繼續施工做出確認的活動。(2) The main con trol program主控項目On the safety of Con struct ion Engin eeri ng、health 、Environmen tal Protectio n andThe public in terest tests play a decisive role in the project建筑工程中的對安全、衛生、環境保護和公眾利益起決定性作用的檢驗項目。(3 ) T

5、he general project 一般項目In additi on to the main con trol in spect ion items outside the project除主控項目以外的檢驗項目。(4) Base layerDirectly bear the weight of con structi on decorati on the surface layer.直接承受裝飾裝修施工的面層。4。 Con struct ion preparati on施工準備4.1 Tech ni cal preparati on技術準備Preparati on of light ste

6、el gypsum board partiti on wall engin eeri ng con struct ion pla n, andthe workers are writte n tech ni cal clarificati on and safety.編制輕鋼骨架石膏板隔墻工程施工方案，并對工人進行書面技術及安全交底。4。2 Three hours refractory aging gypsum board partition system三小時耐火時效石膏板隔墻系統Double layer three 12mm paper fireproof gypsum board +75

7、 keel +50mm thick, 60kg/m3de nsity rock wool.雙面三層12mm氏面防火石膏板+75龍骨+50mr厚 ,60kg/m 3容重巖棉。4.3 Material requireme nts.材料要求(1) Various keel , gypsum board materials and accessories and auxiliary materials shall comply with existi ngn atio nal sta ndardsand in dustry sta ndards. When thedecorative material

8、 exam in ati on, found not to comply with the desig n requireme nts and the releva nt provisi ons of in door en vir onmen tal polluti on con trol norms， prohibited theuse of.(1) 各類龍骨、配件和石膏板材料以及輔材的材質均應符合現行國家標準和行業標準的規 定。當裝飾材料進場檢驗，發現不符合設計要求及室內環保污染控制規范的有關規定時， 嚴禁使用.1) Light steel keel main parts : The ke

9、el along the top ， along the keel to strengthen the keel ， vertical keel ， transverse keel should meet the design requirements and the releva nt provisi ons of the sta ndards 。輕鋼龍骨主件：沿頂龍骨、沿地龍骨、加強龍骨、豎向龍骨、橫撐龍骨應符合設計要 求和有關規定的標準.2) Light steel frame accessories : Support card ， Cato，Angle, fittings, such

10、 asfixed and layeri ng accessories should comply with the desig n requireme nts輕鋼骨架配件：支撐卡、卡托、角托、連接件、固定件和壓條等附件應符合設計要求.3) Fastening material: pull anchors, expansion bolts， galvanized self tapping screws and paste caulk ing material shall meet the desig n requireme nts.緊固材料：拉錨釘、膨脹螺栓、鍍鋅自攻螺絲和粘貼嵌縫材，應符合設計

11、要求。4) Gypsum board surface should be smooth ，neat edge ， there should be no dirt,cracks，chipp ing, warp ing, peeli ng，color, patter n in complete defects.石膏板應表面平整、邊緣整齊、不應有污垢、裂紋、缺角、翹曲、起皮、色差、圖案 不完整的缺陷。(2) Fill sound insulation material: Rock wool should meet the design requirementsof selectio n.填充隔聲材料

12、：巖棉應符合設計要求選用(3) Quality requirements: see table below 質量要求:見下表paperbacked gypsum board size allowable deviationunit: mm紙面石膏板規格尺寸允許偏差單位:mmItem項目Len gth長度Width寬度Thickness 厚度9。5 12尺寸偏差0, 60, 5).5).5Annotate : Plate surface should be cut into rectangles， two diagonal length is notmore tha n 5mm.fracture

13、 load valuesPaperbacked gypsum board紙面石膏板斷裂荷載值Plate thickness（ mm）板材厚度（mm）The fracture load ， N 斷裂荷載，N縱向橫向9。536014012。050018015。065022018。080027021。095032025.01100370Paperbacked gypsum board weight per un it area value紙面石膏板單位面積重量值Plate thick ness（mm ） 板材厚度（mm）Weight per un it area kg/m 2單位面積重量kg/m9。

14、59.512。012。015.015。018。018。021。021。025。025.0Light steel keel to allow the sect ion size deviatio nun it: mm輕鋼龍骨斷面規格尺寸允許偏差單位：mmItem 項目Classy article優等品First grade 一等品Qualified products 合格品Length 長度 L+30, 10Cladding keelSection sizeSize尺寸AAW 30 1.0A30 1。5覆面龍骨斷面尺寸Size尺寸B 0.3 0.4 0.5Other keelSize尺寸 0。3

15、 0。4 0.5Section sizeA其它龍骨Size尺寸30 1。5Light steel keel sides and straightness of the groundunit : mm/1000mm輕鋼龍骨側面和地面的平直度單位：mm/1000mmCategory類別Variety品種Detectio n site檢測部位Classy article優等品First grade_.綸口 等口口Qualified products 合格品Wall墻體Transverse keel and vertical keel橫龍骨和豎龍骨Side側面0。50。71。0Bottom 底面1.0

16、1.52.0Through keel貫通龍骨Side and bottom側面和底面Con dole top吊頂Beari ng the keel andCladd ing keel承載龍骨和覆面龍骨Side and bottom側面和底面An gle of light steel keel allowable deviati on輕鋼龍骨角度允許偏差Formingangles Shortest edge size mm成形角的最短邊尺寸mmClassy article優等品First grade一等品Qualified products 合格品10 18士1 15士 1 30士 20018士

17、 1 00士 1 15士 1 30Light steel keel appearanee、Surface qualityunit:G/m2輕鋼龍骨外觀、表面質量單位：g/m2Notpermitted不允許No more serious corrosion 、 Damaged spots 、pitti ng .Area of not more tha n 1cm2 of spots per meter within the length of not more than five. 、 一 一 亠-一 .一 八.、 ” . 一 . ,2 , 一 八.,.尢較嚴重腐蝕、損壞黑斑、麻點 米長度內不多

18、于5處。.面枳不大于1cm旳黑斑每Item項目Classy article 優等品First grade一等品Qualified products 合格品Double-sided galva ni zed 雙面鍍鋅量120100804.3 Main machines and tools主要機具Every teams and groups with a list of major mach inery and equipme nt每班組主要機具配備一覽表No.序 號Mach in ery, equipme nt 機械、設備名 稱Specificati on規格型號Quotapowerorcapa

19、city定額功率或容 量Qty數量Perfor mance性能Type ofwork工種Remarks備注1Electric電錘TE 150.65kw2Good良好carpe nter木工Calculated in accorda nee with 8-10 people a teams and groups 按 8-10 人/班組 計算2Hand drill手電鉆JIZ ZD 10A0.43kw1Good良好carpe nter木工Calculated in accorda nee with 8 10 people a teams and groups 按 8-10 人/班組 計算3Grin

20、 di ng wheel cutt ing mach ine 砂輪切割機JIG SDG- 3501.25kw1Good良好carpe nter木工Calculated in accorda nee with 8 10 people a teams and groups 按 8 10 人/班 組計算4Pullrivetgun拉鉚槍2Good良好carpe nter木工Calculated in accorda nee with 8 10 people a teams and groups 按 8 10 人/班 組計算5alumi num screed 鋁合金靠尺2m3Good良好carpe nt

21、er木工Calculated in accorda nee with 8-10 people a teams and groups 按 8-10 人/班組 計算6Horiz on tal600mm4Goodcarpe nterCalculated in accorda neeruler水平尺良好木工with 8 10 people a teams and groups 按 8-10 人/班組 計算7Wrench扳手AdjustableWrenchorHex wrench 活動扳手或六 角扳手8Good良好carpe nter木工Calculated in accorda nee with 8

22、10 people a teams and groups 按 8-10 人/班組 計算8Tape measure 卷尺5m8Good良好carpe nter木工Calculated in accorda nee with 8 10 people a teams and groups 按 8-10 人/班組 計算9Li ne hammer線錘0.5kg4Good良好carpe nter木工Calculated in accorda nee with 8 10 people a teams and groups 按 8 10 人/班 組計算(1) Electric machinery : Hand

23、 drill 、 Impact hammer 、 Cutting machine.電動機具：手電鉆、沖擊電錘、切割機 .(2) Hand tools:Pull rivet gun 、Hand saw 、Pliers、hammer 、screw driver 、spanner 、 Line drop 、screed、steel rule、Steel horizontal ruler Etc 。手動工具：拉鉚槍、手鋸、鉗子、錘、螺絲刀、扳子、線墜、靠尺、鋼尺、鋼水平 尺等。4.4 Operating conditions作業條件(1) Before the con struct ion of li

24、ght steel frame partiti on，Should be arran ged outside，In stall gypsum board should wait for roofi ng 、 ceili ng and After complet ing the wall plaster. Basement moisture content meet the requirements of decoration， Shouldgen erally be less tha n 8% 12%。 And after the releva nt un its、Departme nt s

25、acceptanee 。 The completion of the handover formalities.If the design to pillow，After the pillow should meet the desig n stre ngth can be in stalled in the above partiti on keel.輕鋼骨架隔斷工程施工前，應先安排外裝，安裝石膏板應待屋面、頂棚和墻體抹灰完 成后進行。基底含水率達到裝飾要求，一般應小于8% 12%以下。并經有關單位、部門驗收合格。辦理完工種交接手續。如設計有地枕時，地枕應達到設計強度后方可在 上面迸行隔墻龍

26、骨安裝.(2)1 nstallation of various systems of pipes 、 Box elastic line and other preparatory work already in place.安裝各種系統的管、線盒彈線及其他準備工作己到位。5. Critical quality points關鍵質量要點5。1 Materials Key requireme nts材料的關鍵要求(1) Various keel、 Fitting and Gypsum board material And adhesive auxiliary materials shall com

27、ply with exist ing n ati onal sta ndards and in dustry sta ndards.各類龍骨、配件和石膏板材料以及膠粘劑輔材的材質均應符合現行國家標準和行業標 準的規定。5.2 Key tech no logy requireme nts技術關鍵要求Elastic line must be accurate ，After a reinsertion will continue after the next process 。 Secure the top and bottom of the keel,After each han dover ke

28、el,Should remain flat vertical,Securely in stalled。彈線必須準確，經復驗后方可進行下道工序。固定沿頂和沿地龍骨，各自交接后的龍 骨，應保持平整垂直，安裝牢固。5。3 The key requirement of quality質量關鍵要求（1） Prohibited partition wall connecting member using shooting nail fixed on the brickwall.Should use the embedded parts or expansion bolt connection.Upper

29、and lower threshold must be firmly conn ected with the main body.嚴禁隔斷墻上連接件采用射釘固定在磚墻上。應采用預埋件或膨脹螺栓進行連接。上 下檻必須與主體結構連接牢固.（2）Gypsum board should un dergo a rigorous select ion， Surfaces should be flatand smooth 。 In stall gypsum board should be strictly checked the verticality and smooth ness keel 。石膏板應經

30、嚴格選材，表面應平整光潔。安裝石膏板前應嚴格檢查龍骨的垂直度和平 整度。5。4 Occupation health safety critical requirements職業健康安全關鍵要求（1） ）When using power tools ， Electricity should follow thecon struct ion sitetemporary electrical safety technical specificationsJGJ46-88 。在使用電動工具時，用電應符合施工現場臨時用電安全技術規范JGJ4688。（2）when work high above the

31、gro und， Scaffold ing erecti on should follow theChongqing Muni cipality buildi ng con struct ion safety practices。在高空作業時，腳手架搭設應符合重慶市建筑工程施工安全操作規程。（3）Prevent the dust pollution during the process of construction should take the corresp onding protective measures 。施工過程中防止粉塵污染應采取相應的防護措施。5。5 Environment

32、 the key requirements環境關鍵要求（1） During the construction process should be consistent with civil building engineering environmental pollution control norms GB50325 2001 。在施工過程中應符合民用建筑工程室內環境污染控制規范GB50325- 2001。（2） During thecon struct ion processshould preve nt no isepollutio n,Atthecon struct ionsite

33、boun dary no isesen sitive areasshouldchoose touselow noise equipment,Can also take other measures to reduce noise。在施工過程中應防止噪聲污染， 在施工場界噪聲敏感區域宜選擇使用低噪聲的設 備，也可以采取其他降低噪聲的措施 .6。Construction technology 施工工藝6.1 Process flows 工藝流程snap the line Installation heaven and earth keel Install vertical keel Install

34、 thesystem pipe ， line Installing the card blocked lateral keel Install gypsum board in the outboard Filled with rock wool Install inner gypsum board彈線安裝天地龍骨安裝豎向龍骨安裝系統管、線安裝橫向卡擋龍骨安裝外 側石膏板填充巖棉棉安裝內測石膏板6。 2 Operation process操作工藝(1 ) Snap the line 彈線Pop up on the substrate horizontal and vertical lines v

35、ertical， Used to control theposition of installation partition keel 、 Keel flatness and fixed-point 。 在基體上彈出水平線和豎向垂直線，以控制隔斷龍骨安裝的位置、龍骨的平直度和固 定點。( 2 ) The partition keel installation 隔斷龍骨的安裝1) Fixed position along the elastic line along the top and along the keel ， After each handover keel ， Should re

36、main straight .Fixed-point spacing should not exceed 800m , The keel to the top portion must be fixed firmly 。Between border keel and matrix沿彈線位置固定沿頂和沿地龍骨，各自交接后的龍骨，應保持平直。固定點間距應不 大于800m,龍骨的端部必須固定牢固.邊框龍骨與基體之間，應按設計要求安裝密圭寸條.2) When choosing support card series keel ,Support the card should be installed

37、onthe vertical keel opening ,The card distance is 400 mm , Distance of 20 25 mm at both ends of the keel 。選用支撐卡系列龍骨時，應先將支撐卡安裝在豎向龍骨的開口上，卡距為400mm距龍骨兩端的為2025伽3) when Choose penetration keel,Height of less than 3m installation one partition wall;3 5 m to install two ； 5m above installation three 。選用通貫系列

38、龍骨時，高度低于3m的隔墻安裝一道;3-5m時安裝兩道;5m以上時安裝三道。4 ) The hole is not more than 600 mm on both sides stand vertical keel , respectively ,Plus a fixed upper and lower Horizontal keel hole , More than 600 mm on both sides stand vertical keel , respectively , Plus a fixed upper and lower horizontal keel hole 。門窗或特

39、殊節點處，應使用附加龍骨，洞口不超600mm兩邊分別立豎龍骨，洞口上下加 橫龍骨固定,超過 600 mm 兩邊分別立豎龍骨 , 洞口上下加橫龍骨和立豎立龍骨固定、 加強等安裝應符合設計要求。Partitio n frame allowable deviati on龍骨詳細布置見下圖：5) Skeleton allowable deviation of installation, Shall conform to table3 3 2.骨架安裝的允許偏差，應符合表3 - 3 - 5 - 2規定，Partitio n frame allowable deviati on隔斷骨架允許偏差The se

40、rial n umber 項次Item項目Allowable deviati on 允許偏差(mm)In specti on methods檢驗方法1Elevati on of vertica1立面垂直3The care with 2m cable board in specti on用2 m托線板檢查2Surface is flat and level表面平整2In 2 m ruler and wedge feeler check用 2m直尺和楔型塞尺檢查(3)In stallati on of gypsum board石膏板安裝1) Before in stall the gypsum b

41、oard ，Partiti on should be embedded in the pipes and attached to the walls of the device to take measures to stre ngthe n partial。安裝石膏板前，應對預埋隔斷中的管道和附于墻內的設備采取局部加強措施2) Gypsum board should be laid vertically ， Long side seam should fall on the vertical keel 。石膏板應豎向鋪設，長邊接縫應落在豎向龍骨上。3) Double sided gypsum

42、 board in stallati on， Should be one side of the in side andoutside two layers of gypsum board and keel staggered joints to arrange joint and should not fall on the same root keel ； According to the design requirements of 3 hours fire protect ion ,After a good should be in stalled at the side of the

43、 keel gypsum plasterboard ， Carried rock wool padding; Using rock wool 50mm ， 60kg / m3 of rock wool board fire treatme nt。 The n the other side of the en closed board 。雙面石膏板安裝，應與龍骨一側的內外兩層石膏板錯縫排列接縫不應落在同一根龍骨 上;根據3小時防火失效的設計要求，應在龍骨一側安裝好石膏石膏板后，進行巖棉填 充；采用巖棉50mm 60kg/m 3的巖棉板進行防火處理再封閉另一側的板。4) Gypsum board

44、should adopt self tapping screws 。 Surrounding the screwspaci ng should not exceed 200 mm ， Middle part of the screw spaci ng should not exceed 300mm ， Screws from the edge of the plate should be 1016 mm 。 1，2,3 layers of gypsum board, respectively, with 25 mm ，35 mm, 50 mm screw fixed tothe keel ，

45、First and sec ond floors screw spaci ng should be enl arged，The third layerof the screws should be tightly nailed ； Since the outer steel frame block, Can t con structi on ,Gypsum board is fixed outside the side of the 300 mm from the topplace ， Self-tapp ing screws from the in side to the outside o

46、f gypsum boardfixedkeel。石膏板應采用自攻螺釘固定周邊螺釘?shù)拈g距不應大于200mm，中間部分螺釘?shù)拈g距不應大于30Ommn螺釘與板邊緣的距離應為10-16 m。第一、二、三層石膏板分別采用25mm 35mm 50mr的螺釘固定于龍骨上，一、二層螺釘間距應放大，第三層螺釘應緊 密釘固；由于外側鋼架擋住，無法施工，外側距頂部300mr處石膏板固定時，自攻螺釘從內側龍骨向外側石膏板固定。5) When in stalli ng drywall, Should be started from middle part of the plate to plateedges fixed

47、 .Nail head slightly buried plate , But not damage the paper surface; Nail hole should use gypsum putty screw ing。安裝石膏板時，應從板的中部開始向板的四邊固定釘頭略埋人板內，但不得損壞紙面；釘眼應用石膏膩?zhàn)幽ㄆ?) )Gypsum board should be based on accurate a grid size cutouts； Should be inplace and tight against a grid , But cannot be forced.石膏板應按框

48、格尺寸裁割準確；就位時應與框格靠緊，但不得強壓。7) Gypsum plate and the top wall around the wall or pillar should have a notch 3mm。 When laying gypsum board , Should first where the rabbet sealing filling paste , Then pla nking and extrusi on seali ng paste the panel closely con tact withadjace nt surface 。隔墻端部的石膏板與周圍的墻或柱應

49、留有3mr的槽口 .施鋪石膏板時，應先在槽口處加注嵌縫膏，然后鋪板并擠壓嵌縫膏使面板與鄰近表層接觸緊密。8) In the Ding type or cross shaped connecting point , As for the in side corner should use putty covered ， Paste the seam zone ， As exposed corners should protect horn 。在丁字型或十字型相接處，如為陰角應用膩?zhàn)忧稘M , 貼上接縫帶，如為陽角應做護角 .9）Gypsum board joints,Should generall

50、y be 3-5 mm ， Bevel groove must be connected with, On top of the 500mm places with a stick sewed in the gap of gypsum board 。石膏板的接縫，一般應3-5 mm縫，必須坡口與坡口相接，在頂部500mn處用木棍把貼縫貼 于石膏板的縫隙上 .10）The third layer and the second layer gypsum board plasterboard used adhesive coated between layer and layer.第三層石膏板與第二

51、層石膏板每層之間用粘結劑滿涂 .（ 4） The installation order of gypsum board石膏板安裝施工順序1 ） By A1 from north to south， installation ； First install the keel，Then install the outergypsum board ， Then filled with rock wool ， Finally laying inside of gypsum board.從A1北側向南側安裝；先安裝龍骨，再安裝外側石膏板，然后填充巖棉，最后敷設內 測石膏板。（5）Gypsum board

52、 grant putty the outside ，Coated paint。In terior wall grant putty in side of ， Coated paint 。 Since the top 500mm steel frame block at a not convenient construction ， 500 mm on gypsum board first coated with paint to install again。石膏板外側批膩?zhàn)?，涂涂料。?nèi)墻內側批膩?zhàn)?，涂涂料。由于頂?00mn處有鋼架擋住不便 于施工，先在石膏板上500mn處涂上涂料再安裝。7。

53、Material transport 材料運輸7。 1 Vertical transport 垂直運輸（1）Light steel skeleton and plaster board etc ， From the north of A1 using the craneto the third floor of unloading platform 輕鋼骨架和石膏板材等材料，采用吊車從A1北側吊至三樓卸貨平臺處.7。 2 Horizontal transportation 水平運輸（ 1 ） Based on the construction sequence from north to so

54、uth， The material divide thenorth根據從北至南的施工順序，將材料劃分北部，中部 ， 南部三處堆放人工搬運。7。3 施工過程材料搬運（1）The scaffold height as tall building to the unloading platform and the third floor ，The gypsum board moved to the scaffold ，Then according to the gypsum board installation order ， From north to south transportation g

55、ypsum board.腳手架高度搭至與三樓卸貨平臺齊平，將石膏板搬至腳手架上，然后根據石膏板安裝 順序，由北向南運輸石膏板。8. Quality standard 質量標準8。 1 Dominant item 主控項目（ 1） Light steel Framework and gypsum board material 、 varieties 、Specification 、Styles should meet the design requirements and construction norms。輕鋼骨架和石膏板材質、品種、規格、式樣應符合設計要求和施工規范的規定.(2) Light steel keel frame must be in stalled firmly , No loose , Correct positi on 輕鋼龍骨架必須安裝牢固，無松動，位置正確。8.2 General