壓力容器專業英語詞匯_第1頁
壓力容器專業英語詞匯_第2頁
壓力容器專業英語詞匯_第3頁
壓力容器專業英語詞匯_第4頁
壓力容器專業英語詞匯_第5頁
已閱讀5頁,還剩53頁未讀 繼續免費閱讀

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、壓力容器專業英語詞匯壓力容器常用術語縮寫1.檢驗檢測術語(1)MET力學性能試驗(2)CT化學成分分析(3)NDT無損檢測(4)DT尺寸檢查(5)VT外觀檢查(6)RT射線檢測(7)UT超聲檢測(8)MT磁粉檢測(9)PT滲透檢測(10)HB布氏硬度(11)HV維氏硬度(12)HR洛氏硬度(13)HL里氏硬度2.熱處理術語(1)NT正火回火熱處理(2)ISR中間消除應力熱處理(3)PWHT焊后熱處理(4)MAX.PWHT可能達到的最大程度焊后熱處理(5)MIN.PWHT可能達到的最小程度焊后熱處理(6)DHT消氫處理(7)S.C分步冷卻脆化熱處理ASME常用詞匯Abrasion, allowa

2、nce for 磨損,裕量Accessibility,pressure vessels 壓力容器可達性Access openings 通道孔Allowance for corrosion, erosion, or abrasion 腐蝕裕量侵蝕或/磨損裕量Applied linings, tightness 應用襯里密封性Approval of new materials 新材料的批準Articles in Section V 第V卷中的各章Article 1, T-150 第1章T150Article 2 第2章Attachments 附件lugs and fitting 支耳和配件lugs

3、 for platforms, ladders, etc. 平臺,梯子等的支耳nonpressure parts 非受壓件nozzles 接管pipe and nozzle necks to vessel walls 在器壁上的管子和接管頸stiffening rings to shell 殼體上的剛性環Backing strip墊板Bending stress, welded joints彎曲應力,焊接接頭Bend test彎曲試驗Blind flanges盲板法蘭Bolted flange connections螺栓法蘭連接bolt lands 螺栓載荷bolt stress 螺栓應力de

4、sign of 關于設計flange moments 法蘭力矩flange stresses 法蘭應力materials 材料studs 雙頭螺栓tightness of 緊密性types of attachment 附件類型Bolts 螺栓Braced and stayed surfaces 支持和支撐面Brazed connections for nozzles 接管的釬焊連接Brazed joints, efficiency of 釬焊接頭,焊縫系數maximum service temperature 最高使用溫度strength of 強度Brazing, cleaning of b

5、razed surfaces 釬焊,釬焊的表面清理fabrication by 用制造filler metal 填充金屬fluxes 釬焊劑heads into shells 封頭接入殼體operating temperature 操作溫度Buttstraps, curvature 對接蓋板,曲率forming ends of 成型端thickness and corrosion allowance 厚度和腐蝕裕量welding ends of 焊接端Carbon in material for welding 焊接用材料中的碳Cast ductile iron vessels, design

6、 可鍛鑄鐵容器,設計pressure-temperature limitations 壓力-溫度界限service restrictions 使用限制Castings 鑄件carbon steel 碳鋼defects 缺陷impact test 沖擊試驗inspection 檢查quality factor 質量系數specifications 標準Cast iron circular dished heads 鑄鐵碟形封頭Cast iron standard parts, small 鑄鐵標準部件,小件Cast iron pipe fittings 鑄鐵管件Cast iron vessels

7、 鑄鐵容器corners and fillets 圓角和倒角head design 封頭設計hydrostatic test 水壓試驗nozzles and fittings 接管和配件pressure-temperatures limitations 壓力-溫度界限Certificate of Authorization for Code Symbol Stamp 規范符號標志的認可證書Certification of material 材料證明書Certification of Nondestructive Personnel 無損檢驗人員證明書Magnetic Particle Exam

8、ination 磁粉檢驗Liquid Penetrant Examination液體滲透檢驗Radiographic Examination 射線超聲檢驗Ultrasonic Examination 超聲檢驗Chip marks on integrally forged vessels 整體鍛造容器上的缺口標志Circumferential joints alignment tolerance環向連接,組對公差assembling裝配brazing釬焊vessels subjected to external pressure 承受外壓的容器Clad material, inserted st

9、rips 覆層材料,嵌條examination 檢查Clad plate 復合板Cleaning ,of brazed surfaces 釬焊表面清理of welded surfaces 焊接表面Clearance between surfaces to be brazed 釬焊表面間的間隙Combination, of different materials 不同材料組合of methods of fabrication制造方法Computed working pressure from hydrostatic tests 由水試驗計算的工作壓力Conical heads 錐形封頭Conic

10、al sections 圓錐截面Connections ,bolted flange (see Bolted flange connections)連接,螺栓法蘭(見螺栓法蘭連接)brazed 釬焊clamp 卡箍expanded 脹接from vessels to safety valves 由容器至安全閥studded 雙頭螺栓threaded 螺紋welded 焊接Cooling, after postweld heat treating冷卻,焊后熱處理Corrosion allowance腐蝕裕度Corrosion resistant linings防腐蝕襯里Corrugated sh

11、ells波紋形殼體Corrugating Paper Machinery 波紋板機械Cover plates 蓋板on manholes and handholes 在人孔和手孔上的spherically dished 球形封頭Cracking, stress corrosion 應力腐蝕裂縫Cutting plates 板材切割Cylindrical shells, supplementary loading 柱狀殼體,附加載荷thickness 厚度transition in 過渡段Data report, guide for preparation 準備數據報告的指南Defects in

12、 welded vessels, repair 修理焊接容器中的缺陷Definitions定義Design, brazed vessels 設計釬焊容器carbon and low alloy steel vessels 碳鋼及低合金鋼容器cast ductile iron vessels 可鍛鑄鐵容器cast iron vessels 鑄鐵容器clad vessels 覆層容器ferritic steel vessels with properuts enhanced by heat treatment 經熱處理后提高抗拉性能的鐵素體鋼容器forged vessels 鍛造容器high-al

13、loy steel vessels 高合金鋼容器loadings 載荷multichamber vessels 多受壓室容器nonferrous vessels 非鐵金屬容器welded vessels 焊接容器design pressure 設計壓力Diameter exemption 直徑的豁免Dimensions, checking of 尺寸,校核Discharge of safety valves 安全閥泄放Dished heads (see formed heads) 碟形封頭(見成形封頭)Disks, rupture 防爆膜Dissimilar weld metal 不同金屬的焊

14、接Distortion, of welded vessels 大變形、焊接容器supports to prevent 用支撐防止Drainage, discharge from safety and relief valves 排放,由安全閥和泄壓閥泄放Drop weight tests 落錘試驗Eccentricity of shells 殼體的偏心度Edges of plates, metal removal from 由加工板邊去除金屬tapered 錐度Efficiency, around openings for welded attachments 焊縫系數,環繞焊接附件孔口Ela

15、sticity, modulus of 彈性模量Electric resistance welding 電阻焊Ellipsoidal heads 橢圓封頭Erosion, allowance for 侵蝕裕量Etching, of sectioned speciments 侵蝕,關于截面試樣solutions for examination for materials 檢驗材料的溶液Evaporators 蒸發器Examination, of sectioned speciments 剖面試樣的檢驗of welded joints 焊接接頭的檢驗Exemptions diameter and

16、volume 直徑和容積的豁免Expanded connections 脹接連接External pressure, tube and pipe 外壓管External pressure vessels 外壓容器allowable working pressure for 許用工作壓力charts 算圖design of heads for 封頭設計joints in shells of 殼體上的接頭reinforcement for openings 開孔補強stiffening rings in shells 殼體上的剛性環supports for 支承thickness of shell

17、 殼體厚度reducers 變徑段Fabrication, brazed vessels 制造,釬焊容器Ferritic steels vessels with tensile proper ties enhanced by heat treatment, design 經熱處理后提高抗拉性能的鐵素體鋼容器,設計fabrication 制造head design 封頭設計heat treatment熱處理heat treatment verification tests 熱處理驗證試驗marking 標志materials 材料stamping 標記welded joints 焊接接頭Fiel

18、d assembly of vessels 容器的現場安裝Filler plugs for trepanned holes 錐孔的管塞Fillet welds 角焊Fired process tubular heaters 直接火管式加熱爐Fitting attachments 附件裝配Flange connections 法蘭連接Flange contact facings 法蘭接觸面Flanges 法蘭bolted design 螺柱法蘭設計of formed heads for welding 用于焊接成型封頭type of attachment 附件的類型Flat heads and

19、covers, unstayed 無支撐平封頭和蓋板reinforcement of openings 開孔補強Flat spots on formed heads 成型封頭上的平坦部分Flued openings 翻邊開孔Forged parts, small 鍛造部件,小的Forged vessels 鍛造容器heat treatment 熱處理localized thin areas 局部薄壁區welding 焊接Forgings 鍛件identification of 識別Ultrasonic Examination 超聲檢驗Form manufacturers data report

20、 制造廠數據報告格式partial report 零部件數據報告Formed heads 成型封頭flued openings in 封頭上翻邊開孔insertion of, welded vessels 插入,焊接容器joint efficiency 接頭系數knuckle radius 轉角半徑length of skirt 直邊長度on welded vessels 在焊接容器上reinforcement for openings 開孔補強Forming 成型ends of shell plates and buttstraps 殼體板和對接搭板端forged heads 鍛造封頭she

21、ll sections and heads 筒節和封頭Furnaces 爐子temperatures for postweld head treatment 焊后熱處理溫度Furnaces for heat treating 熱處理爐temperature control of 爐溫控制Galvanized vessels 鍍鋅容器Gasket materials 墊片材料Girth joints (see circumferential joints) 環縫接頭(見環向接頭)Handhole and manhole openings 手孔和人孔開孔Head flange (skirt) le

22、ngth 封頭翻邊(直邊)長度Head joints 封頭接頭brazing 釬焊welded 焊接Head openings 封頭開孔entirely in spherical portion 全部在球體部分Head joints 封頭接頭concave and convex 凹面和凸面flat (see flat heads) 平板(見平封頭)forged 鍛造的formed (see Formed heads) 成型的(見成形封頭)forming 面型thickness, after forming 厚度,成型之后Heads, design, conical 封頭,設計,錐形ellips

23、oidal 橢圓形hemispherical 半球形spherically dished 球狀碟形toriconical 帶折邊的錐形torispherical 帶折邊的球形torispherical, knuckle radius 帶折邊的球形,轉角半徑Heads and shells 封頭和殼體external pressure, out-of-roundness 外壓,不圓度openings through or near welded joints 通過或靠近焊縫處的開孔roundness tolerance 不圓度公差Heat exchangers 熱交換器Heat treatmen

24、t 熱處理by fabricator 由制造廠進行carbon and low-alloy steel vessels 碳鋼和低合金鋼容器ferritic steel vessels with tensile properties enhanced by heat treatment 經過熱處理后提高抗拉性能的鐵素體的容器forged vessels 鍛造容器furnaces 爐子high-alloy vessels 高合金容器of test specimens 試樣的熱處理verification tests of 熱處理驗證試驗Hemispherical heads 半球形封頭High p

25、ressure vessels 高壓封頭Holes 小孔for screw stays 用于螺絲固定for trepanning plug sections, refilling 用于穿孔螺塞部分,再填充telltale 指示孔unreinforced, in welded joints 不補強,在焊縫上Hubs, on flanges 高頸,在法蘭上Hydrostatic proof tests 水壓驗證試驗destructive 破壞性prior pressure application 在升壓之前Hydrostatic test 水壓試驗cast iron vessels 鑄鐵容器com

26、bined with pneumatic 與氣壓試驗混合的enameled vessels 搪玻璃容器external pressure vessels 外壓容器galvanized vessels 鍍鋅容器standard 標準welded vessels 焊接容器Identification 識別of forging 鍛件of plates 平板of welds 焊接Identification markers, radiographs 識別標志,射線照相Impact test 沖擊試驗certification 證明properties 性能specimens 試樣temperature

27、 溫度Inspection 檢查before assembling 組裝之前carbon and low-alloy steel 碳鋼和低合金鋼cast ductile iron vessels 可鍛鑄鐵容器cast iron vessels 鑄鐵容器clad vessels 覆層容器during fabrication 在制造期間ferritic steel vessels with tensile properties enhanced by heat treatment 經過熱處理后提高抗拉性能的鐵素體的容器fitting up 組對forged vessels 鍛造容器heat tre

28、atment, forgings 熱處理,鍛件high-alloy steel vessels 高合金鋼容器magnetic particle 磁粉material 材料nonferrous vessels 非鐵金屬容器plate 板材postweld heat treatment 焊后熱處理pressure vessels, accessibility 壓力容器,可達性quality control 質量管理sectioning of welded joints 焊接接頭的剖面檢驗spot examination 抽樣檢查steel castings 鑄鋼件surfaces exposed

29、and component parts 暴露的表面和元件部分test specimens 試樣vessels 容器vessels exempted from 免檢容器welded vessels 焊接容器Inspection openings 檢查孔Inspectors 檢查師access to plant 在廠內應有的便利control of stamping 打印管理duties 職責facilities 裝備qualification 資格reports 報告Installation 安裝pressure-relieving devices 泄壓裝置pressure vessel 壓力容

30、器Integral cast iron dished heads 整體鑄鐵碟形封頭integrally finned tubes 整體翅片管Internal structures 內部構件Jacketed vessels 夾套容器Joints 接頭brazed 釬焊circumferential (see Circumferential joints) efficiency, brazed 環縫(見環向接頭)系數,釬焊welded 焊接electric resistance, butt welding 電阻,對接焊in cladding and applied linings 在覆層及襯里in

31、 vessels subjected to external pressure 在承受外壓的容器lap (see Lap joints) 搭接(見搭接接頭)longitudinal (see Longitudinal joints) 縱向(見縱向接頭)tube-to-tubesheet 管子對管板Jurisdictional Review 權限審查Knuckles 過渡圓角radius 半徑transition section 變徑段Lap joints 搭接接頭amount of overlap 搭接量brazed 釬焊longitudinal under external pressure

32、 在外壓作用下縱向的welded 焊接Laws Covering Pressure Vessels 涉及壓力容器的法規Lethal gases or liquids 致命的氣體或液體Ligaments, efficiency of 孔帶,系數Limitation on welded vessels 焊接容器的限制Limit of out-of-roundness of shells 殼體不圓度的限制Linings 襯里corrosion resistant 抗腐蝕Liquid penetrant examination 液體滲透檢驗Loadings 載荷Local postweld heat

33、treatment 局部焊后熱處理Longitudinal joints 縱向接頭alignment tolerance 對準公差brazing 釬焊vessels subjected to external pressure 承受外壓的容器Low-temperature operation 低溫操作Low-temperature vessels brazed 低溫容器,釬焊for gases and liquids 用于氣體和液體impact test requirements 沖擊試驗要求impact test, when not required 沖擊試驗,當不要求時marking 標志

34、materials 材料testing of materials 材料試驗Lugs for ladders, platforms, and other 梯子,平臺及其它附件的支耳Magnetic particle inspection 磁粉檢查Manholes, and handholes 人孔,手孔cover plate for 蓋板minimum vessel diameter requiring 所需最小容器直徑Manufacture, responsibility of 制造者,職責Manufacturers Data Report (see Data Report) 制造廠數據報告(

35、見數據報告)Manufacturers stamps 制造廠的印記Marking castings 標志,鑄件materials 材料plates 板材standard pressure parts 標志受壓件valves and fittings 閥門和配件with Code symbol 帶有規范符號Markings, transfer after cutting plates 標志,板材切割以后的轉移Materials, approval of new 材料,新材料的批準approval of repairs 修補的批準brazed vessels 釬焊容器carbon and low-

36、alloy steel vessels 碳鋼和低合金鋼容器cast ductile iron 可鍛鑄鐵castings 鑄鐵cast iron vessels 鑄鐵容器certification 合格證clad vessels 覆層容器combination of 組合材料ferritic steel vessels with tensile properties enhanced by heat treatment 經熱處理后提高抗拉性能的鐵素體鋼容器forged vessels 鍛造容器for nonpressure parts 非受壓元件heat treatment of 熱處理high

37、-alloy steel vessels 高合金鋼容器inspection of 檢查nonferrous vessels 非鐵金屬容器pipe and tube 管子plate 板rods and bars 桿和棒specification for 標準standard pressure, parts 標準受壓元件unidentified 未鑒別的use of over thickness listed in Section 采用超過列于第卷表中的厚度welded vessels 焊接容器Measurement, 測量dimensional 尺寸of out-of-roundness of

38、shells 殼體不圓度Metal temperature determination 金屬溫度,確定control of 控制Mill undertolerance 鋼廠負公差控制Minimum thickness of plate 板材的最小厚度控制Miscellaneous pressure parts 其它受壓件控制Multichamber vessels design 多承壓室容器,設計Multiple duplicate vessels 多個相同的容器Multiple safety valves 多個安全閥Nameplates 銘牌New materials 新材料Noncircu

39、lar vessels 非圓形容器ligament efficiency 孔帶系數nomenclature 術語obround design 長圓形設計rectangular design 矩形設計reinforcement 補強examples 實例Nonpressure parts, attachment of 非受壓元件的連接Notch ductility test 缺口韌性試驗Nozzle openings, reinforced 接管開孔,補強的unreinforced 非補強的vessels subjected to external pressure 承受外壓得容器Nozzles

40、 attachment of to shell 接管,與殼體的連接minimum thickness of neck 縮頸的最小厚度(see also Connections)(也可見連接件)Nuts and washers 螺母和墊圈Offset of edges of plates at joints 在接頭處板邊的偏差Openings adjacent to welds 開孔,鄰近焊縫closure of 封閉for connections to brazed vessels 用于對釬焊容器的連接for drainage 用于排放head (see Openings head and s

41、hell) 封頭(見開孔,封頭和殼體)in flat heads 在平板封頭上inspection 檢查manhole (see Manholes) 人孔(見人孔)nozzle (see Nozzle opening) 接管(見接管開孔)shell (see Openings, head and shell) 殼體(見開孔,封頭和殼體)through welded joints 通過焊接接頭Openings, head and shell, computation of 開孔,封頭和殼體,計算not requiring additional reinforcement 不需要附加補強reinf

42、orced, size 補強,尺寸reinforcement for adjacent openings 鄰近開孔的補強reinforcement of 補強requiring additional reinforcement 需要附加補強shapes permissible 許用形式unreinforced, size 不補強的,尺寸Outlets, discharge, pressure relieving devices 排放口,出料,泄壓裝置Out-of-roundness 不圓度Overpressure limit for vessels 容器的超壓極限Partial data re

43、port, manufacturers 零部件數據報告,制造廠的Parts, miscellaneous 部件,各種各樣的Peening 捶擊Pipe connections openings for 管子的連接,用于開孔Pipe fittings vessels built of 管子配件,制造的容器Pipe and tubes 各類管子Pipe used for shells 用作殼體的管子piping external to vessel 容器外的管子Plate, curvature 板,曲率measurement, dimensional check 測量,尺寸校核Plate edge

44、s cutting 板邊,切割exposed left unwelded 留下不予焊接的顯露部分inspection of 檢查Plates 平板alignment 找準cover 蓋板cutting 切割forming 成型heat treatment 熱處理identification 標志impact test 沖擊試驗inspection 檢查laying out 劃線less than 6 mm thickness 厚度小6mmmarkings transfer after cutting 標志,在切割以后的轉移minimum thickness 最小厚度repair of defe

45、cts 缺陷修理specifications 標準structural carbon steel 結構碳鋼Plug welds 塞焊Pneumatic test 氣壓試驗pressure 壓力yielding 屈服Porosity welded joints 氣孔,焊接接頭Porosity charts 氣孔圖Postheat treatment 后熱處理connections for nozzles and attachments 用于接管和附件的連接cooling after 隨后的冷卻 furnace temperature 爐溫inspection 檢查local 局部requirem

46、ents 要求temperature range 溫度范圍welded vessels 焊接容器Preheating 預熱Preparation of plates for welding 焊接板材的準備pressure, design 壓力,設計limits 極限(see also Working pressure, allowable) (也可見工作壓力,許用)Pressure parts miscellaneous 受壓件,其它的Pressure relieving devices 泄壓裝置discharge 排放installation and operation 安裝和運轉ruptu

47、re disks 防爆模setting 整定Pressure vessels 壓力容器exempted from inspection 免檢Produce form of Specification 產品技術條件Proof test hydrostatic (see Hydrostatic proof test) 驗證試驗,水壓(見水壓試驗)Qualification 評定of brazers 釬焊工of welders 焊工of welding procedure 焊接工藝Quality Control System 質量保證體系Quenching and tempering 淬火及回火Qu

48、ick-actuating closures 快開蓋Radiograph factor 射線照相系數Radiographing 射線照相examination by 檢查partial 部分quality factors 質量系數requirements 要求spot examination 抽樣檢查retests 重新試驗thickness, mandatory minimum 規定最小厚度Radiographs, acceptance by inspector 射線照相,由檢查員認為合格gamma rays, radium capsule 射線,裝鐳的盒子interpretation by

49、 standard procedure 由標準程序的說明rounded indications 圓形顯示Reaming holes for screw stays 為固定螺釘用的鉸孔Reducer sections, rules for 變徑段,規程Reinforcement 補強defined limits 規定的范圍head and shell openings 封頭及殼體開孔large openings 大開孔multiple openings 多個開孔nozzle openings 接管開孔of openings in shells, computation of 殼體上開孔,計算op

50、enings subject to rapid pressure fluctuation 經受壓力突然波動的開孔Fluctuation 經受壓力突然波動的開孔strength 強度Relief devices 泄放裝置(see also Pressure relieving devices, Safety and relief Valves)(也可見泄壓裝置,安全閥和泄壓閥)Relieving capacity of safety valves 安全閥排量Repairs, approval of defects in material 修理,材料中缺陷的認可defective Brazing

51、有缺陷的釬焊defects in forgings 鍛件中的缺陷defects in welds 焊縫中的缺陷Responsibility of manufacturer 制造者的職責Retention of Records 記錄的保存Radiographs 射線照相Manufacturers Data Reports 制造廠的數據報告Retests, frogings 復試,鍛件impact specimens 沖擊試樣joints, welded 接頭,焊接Rods, bars, and shapes 桿棒喝型材Rolled parts, small 軋制件,小件Rupture disks

52、 爆破模Safety 安全性safety relief, and pressures relief valves, adjustable blow down, capacity certification 安全泄放和泄壓閥,可調節的泄放,排放量證明capacity, conversion 排量,換算connection to vessels 連接至容器construction 結構discharge pipe 排放管indirect operation 間接操作installation 安裝installation on vessels in service 容器在役時的安裝liquid re

53、lief 液體泄放marking 標志minimum requirements 最低要求pressure setting 壓力整定spring loaded 受載彈簧springs, adjustment 彈簧,調節stop valves adjacent to 鄰近的截止閥test 試驗protective devices 防護裝置for unfired steam boiler 對非直接火蒸氣鍋爐Scope 適用范圍sectioning, closing holes left by 解剖,解剖孔的封閉etching plugs taken 解剖樣的侵蝕examination by 檢查Se

54、rvice restriction 使用限制Shapes, special 形狀,特殊Shell plates, forming ends of 殼體用材料,封頭成型Shells 殼體allowable working pressure 許用工作壓力computation of openings in 開孔計算forming 成型made from pipe 由管子制造的stiffening rings 剛性環thickness 厚度Transition section 過渡段Sigma-phase formation 相的形成Skirts length on heads 直邊、封頭上的長度s

55、upport of vessels 裙座,容器支撐Slag inclusion welds 焊縫中的夾渣Special constructions 特殊結構Specification for materials 材料標準Spherical sections of vessels 容器的球形部分Spot examination of welded joints 焊接接頭的抽樣檢查Springs for safety valves 安全閥的彈簧Stamping location of 打印位置multipressure vessels 多重壓力容器omission of 省略safety valves 安全閥with Code symbol 帶有規范標記Stamps, certificate of authorization 鋼印,授權l(xiāng)ow stress 低壓力not to b

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論