中英文翻譯傳感器

1、傳感器的基礎知識Basic knowledge of transducersA transducer is a device which converts the quantity being measured into an optical,mechanical, or-more commonly-electrical signal. The energy-conversion process that takesplace is referred to as transduction. Transducers are classified according to the transduc

2、tion principle involved and the form of themeasured. Thus a resistance transducer for measuring displacement is classified as aresistance displacement transducer. Other classification examples are pressure bellows, force diaphragm, pressure flapper-nozzle, and so on.1. Transducer ElementsAlthough th

3、ere are exception ,most transducers consist of a sensing element and a conversionor control element. For example, diaphragms,bellows,strain tubes and rings, bourdon tubes,and cantilevers are sensing elements which respond to changes in pressure or force and convert these physical quantities into a d

4、isplacement. This displacement may then be used tochange an electrical parameter such as voltage, resistance, capacitance, or inductance. Such combination of mechanical and electrical elements form electromechanical transducing devices or transducers. Similar combination can be made for other energy

5、 input such as thermal. Photo, magnetic and chemical,giving thermoelectric, photoelectric,electromaanetic,and electrochemical respectively.2. Transducer SensitivityThe relationship between the measured and the transducer output signal is usually obtained bycalibration tests and is referred to as the

6、 transducer sensitivity Kl=output- signal increment /measured increment. In practice, the transducer sensitivity is usually known, and, bymeasuring the output signal, the input quantity is determined from input = output-signal increment / Kl.3. Characteristics of an Ideal TransducerThe high transduc

7、er should exhibit the following characteristics.a high fidelity-the transducer output waveform shape be a faithfulreproduction of the measured; there should be minimum distortion. b There should be minimum interference with the quantity being measured; the presence of the transducer should not alter

8、 the measured in any way.c Size. The transducer must be capable of being placed exactly where it is needed.d There should be a linear relationship between the measured and the transducer signal.e The transducer should have minimum sensitivity to external effects, pressure transducers,for example,are

9、 often subjected to external effects such vibration and temperaturefThe natural frequency of the transducer should be well separated from the frequency and harmonics of the measurand.4. Electrical TransducersElectrical transducers exhibit many of the ideal characteristics. In addition they offer hig

10、h sensitivity as well as promoting the possible of remote indication or mesdurement.Electrical transducers can be divided into two distinct groups:a variable-control-parameter types,which include:i resistanceii capacitanceiii inductanceiv mutual-inductance typesThese transducers all rely on external

11、 excitation voltage for their operation.b self-generating types,which includei electromagneticii photoemissiveiv piezo-electric typesThese all themselves produce an output voltage in response to the measurand input and their effects are reversible. For example, a piezo-electric transducer normally p

12、roduces an output voltage in response to the deformation of a crystalline material; however, if an alternating voltage is applied across the material, the transducer exhibits thereversible effect by deforming or vibrating at the frequency of the alternating voltage.5. Resistance TransducersResistanc

13、e transducers may be divided into two groups, as follows: i Those which experience a large resistance change, measured by using potential-divider methods. Potentiometers are in this group.ii Those which experience a small resistance change, measured by bridge-circuit methods. Examples of this group

14、include strain gauges and resistance thermometers.5.1 PotentiometersA linear wire-wound potentiometer consists of a number of turns resistance wire wound around a non-conducting former, together with a wiping contact which travels over the barwires. The construction principles are shown in figure wh

15、ich indicate that the wiper displacement can be rotary, translational, or a combination of both to give a helical-type motion. The excitation voltage may be either a.c. or d.c. and the output voltage isproportional to the input motion, provided the measuring device has a resistance which is much gre

16、ater than the potentiometer resistance. Such potentiometers suffer from the linked problem of resolution and electrical noise.Resolution is defined as the smallest detectable change in input and is dependent on the cross-sectional area of the windings and the area of the sliding contact. The output

17、voltage is thus a serials of steps as the contact moves from one wire to next.Electrical noise may be generated by variation in contact resistance, by mechanical went due to contact friction, and by contact vibration transmitted from the sensing element. In addition,the motion being measured may exp

18、erience significant mechanical loading by the inertia and friction of the moving parts of the potentiometer. The wear on the contacting surface limits the life of a potentiometer to a finite number of full strokes or rotations usually referred to in the manufactures specification as the number of cy

19、cles of life expectancy, a typical value being 20M 1000000 cycles.The output voltage VO of the unload potentiometer circuit is determinedas follows. Let resistance RI= xi/xt *Rt where xi 二 input displacement, xt= maximum possible displacement,Rt total resistance of the potentiometer. Then output vol

20、tage VO= VRl/(Rl+( Rt-Rl=V*Rl/Rt=V*xi/xt*Rt/Rt=V*xi/xt. This shows that there is a straightline relationship between output voltage and input displacement for the unloaded potentiometer.It would seen that high sensitivity could be achieved simply by increasing the excitation voltage V . however, the

21、 maximum value of V is determined by the maximum power dissipation P of the fine wires of the potentiometer winding and is given by V=(PRt1/2 .5.2 Resistance Strain GaugesResistance strain gauges are transducers which exhibit a change in electrical resistance in response to mechanical strain. They m

22、ay be of the bonded or unbonded variety .a bonded strain gaugesUsing an adhesive, these gauges are bonded, or cemented, directly on to the surface of the body or structure which is being examined.Examples of bonded gauges arei fine wire gauges cemented to paper backingii photo-etched grids of conduc

23、ting foil on an epoxy-resin backing iii a single semiconductor filament mounted on an epoxy-resin backing with copper or niekelleads.Resistance gauges can be made up as single elements to measuring strain in one direction only,or a combination of elements such as rosettes will permit simultaneous me

24、asurements in more than one directionb unbonded strain gaugesAtypical unbonded-strain-gauge arrangement shows fine resistance wires stretched around supports in such a way that the deflection of the cantilever spring system changes the tension in the wires and thus alters the resistance of wire.Such

25、 an arrangement may be found incommercially available force, load, or pressure transducers.5.3 Resistance Temperature TransducersThe materials for these can be divided into two main groups:a metals such as platinum, copper, tungsten, and nickel which exhibitand increase in resistance as the temperat

26、ure rises; they have a positive temperature coefficient of resistance.b semiconductors, such as thermistors which use oxides of manganese,cobalt, chromium, or nickel. These exhibit large non-linear resistance changes with temperature variation and normally have a negative temperature coefficient of

27、resistance.a metal resistance temperature transducersThese depend, for many practical purpose and within a narrow temperature range, upon the relationship RI=RO*1+a*(b1-62 where a coefficient of resistance in C-band RO resistance in ohms at the reference temperature b0=00C at the reference temperatu

28、re range 0C The international practical temperature scale is based on the platinum resistance thermometer,which covers the temperature range -259.35 0C to 630.5 C.b thermistor resistance temperature transducersThermistors are temperature-sensitive resistors which exhibit large non-liner resistance c

29、hanges with temperature variation. In general, they have a negative temperature coefficient.For small temperature increments the variation in resistance is reasonably linear; but, if large temperature changes are experienced, special linearizing techniques are used in the measuring circuits to produ

30、ce a linear relationship of resistance against temperature. Thermistors are normally made in the form of semiconductor discs enclosed in glass vitreous enamel. Since they can be made as small as lmm,quite rapid response times are possible.5.4 Photoconductive CellsThe photoconductive cell , uses a li

31、ght-sensitive semiconductor material. The resistance between the metal electrodes decrease as the intensity of the light striking the semiconductor increases. Common semiconductor materials used for photo-conductive cells are cadmium sulphide, lead sulphide, and copper-doped germanium.The useful ran

32、ge of frequencies is determined by material used. Cadmium sulphide is mainly suitable for visible tight, whereas lead sulphide has its peak response in the infra-red region and is, therefore, most suitable for flame-failure detection and temperature measurement.5.5 Photoemissive CellsWhen light stri

33、kes the cathode of the photoemissive cell are given sufficient energy to arrive the cathode. The positive anode attracts these electrons, producing a current which flows through resistor R and resulting in an output voltageV Photoelectrically generated voltage V=Ip.Rl Where Ip=photoelectric current(

34、A,and photoelectric current lp=Kt.B Where Kt=sensitivity (A/im,and B=illumination input (lumen Although the output voltage does give a good indication of the magnitude of illumination, the cells are more often used for counting or control purpose, where the light striking the cathode can be interrup

35、ted.6. Capacitive TransducersThe capacitance can thus made to vary by changing either the relative permittivity, the effective area, or the distance separating the plates. The characteristic curves indicate that variations of area and relative permittivity give a linear relationship only over a smal

36、l range of spacings. Thus the sensitivity is high for small values of d. Unlike the potentionmeter, the variable-distance capacitive transducer has an infinite resolution making it most suitable for measuring small increments of displacement or quantities which may be changed to produce a displaceme

37、nt7.Inductive TransducersThe inductance can thus be made to vary by changing the reluctance of the inductive circuit.Measuring techniques used with capacitive and inductive transducers:a A.C. excited bridges using differential capacitors inductors.b A.C. potentiometer circuits for dynamic measuremen

38、ts.c D.C, circuits to give a voltage proportional to velocity for a capacitor.d Frequency-modulation methods, where the change of C or L varies the frequency of an oscillation circuit.Important features of capacitive and inductive transducers are as follows: i resolution infiniteii accuracy+一 0.1% o

39、f full scale is quotediii displacement ranges 25-10-6 in to 10-3miv rise time less than 50us possibleTypical measurands are displacement, pressure, vibration, sound, and liquid level.8. Linear Variable-differential Ttransforcner9, Piezo-electric Transducers10, Electromagnetic Transducers11, Thermoel

40、ectric Transducers12, photoelectric Cells13, Mechanical Transducers and Sensing Elements傳感器的基礎知識傳感器是一種把被測量轉換為光的、 機械的或者更平常的電信號 的裝置。能 量轉換的過程稱之為換能。按照轉換原理和測量形式對傳感器進行分類。 用來測量位移的電阻式 傳感器 被歸為電阻式位移傳感器 .* 的分類如壓力波紋管、壓力膜和 壓力閥等1. 傳感器元件除特例外, 大多數的傳感器都由敏感元件、 轉換元件或控制元件組成。 如振動 膜、波紋管、應力管和應力環、低音管和懸臂都是敏感元件 , 它們對壓力和力作出 響

41、應把物理量轉變成位移。 然后位移可以改變電 參數 ,如電壓、電阻、電容或者感 應系數。機械式和電子式元件合并 形成機電式傳感設備或傳感器。 這樣的組合可 用來輸入能量信號。 熱 的,光的 ,磁的和化學的相互結合產生的熱電式、光電式、電 磁式和 電化學式傳感器。2、傳感器靈敏度通過校正測量系統獲得的被測物理量和傳感器輸出信號的關系叫做 傳感器靈 敏度 K1,也就是 K1=輸出信號增量 /測量增量 a 實際中,傳 感器的靈敏度是己知的 , 并且通過測量輸出信號 , 輸入量由下式?jīng)Q定 , 輸入量二輸出信號增量 /K1.3. 理想傳感器的特性a 高保真性 :傳感器輸出波形應該真實可靠地再現被測量 ,

42、并且失真很 小b 可測量最小的干擾 , 任何時候傳感器的出現不能改變被測量。c 尺寸 : 傳感器必須能正確地放在所需的地方。d 被測量和傳感器信號之問應該有一個線性關系e 傳感器對外部影響的靈敏度應該小 ,例如壓力傳感器經常受到外部 振動和溫 度的影響。f 傳感器的固有頻率應該避開被測量的頻率和諧波。4、電傳感器電傳感器具有許多理想特性。 它們不僅實現遠程測量和顯示 , 還能提 供高靈敏 度。電傳感器可分為兩大類a 變參數型 ,包括 :i 電阻式 ;ii 電容式 ;iii 自感應式 ;iv 互感應式 ;這些傳感器的工作依靠外部電壓。b 自激型 , 包括 :i 電磁式 ;11 熱電式 ;111

43、光柵式iV 壓電式。這些傳感器根據測量輸入值產生輸出電壓 ,而且這一過程是可逆的。 比如, 在一 般情況下 , 壓電式傳感器可根據晶體材料的變形產生一個 輸出電壓 :但是,如果在材料上施加一個可變電壓 ,傳感器可以通過 變形或與變電壓同頻率的振動來體現可逆 效應5、電阻式傳感器電阻式傳感器可以分為兩大類 :1 那些表現為大電阻變化的物理量可通過分壓方式進行測量 , 電位器 就屬于此 類。ii 那些表現為小電阻變化的物理量可通過橋電路方式進行測量 , 這一 類包括應 變儀和電阻溫度計5. 1 電位器繞線式電位器由許多繞在非導體骨架的電阻絲以及滑行在線圈 上的觸頭組 成。結構原理如圖 ,觸頭能夠轉

44、動、直線式運動或者兩運 動合成的螺旋式運動如果 測量設備的電阻比電位器的電阻大 , 那么電 壓既可以是交流也可以是直流 ,且輸出電 壓與輸入運動成正比 . 這樣的電位器存在著分辨率和電子噪聲的問題。 分辨率是指 傳感器 能檢測到的最小的輸入增量 , 分辨率大小取決于線圈與滑動觸頭圍成 的面 積。因此 ,輸出電壓為觸頭從一端移到另一端時一系列階躍。 電子噪聲可以通過接 觸電阻的振動、 觸頭摩擦形成的機械磨損以 及從敏感元件傳出的觸頭振動產生。 另外, 測得的運動量可以通過慣 性和電位器中移動元件的摩擦獲得較大的機械載 荷。 觸頭表面的磨損 將電位器的壽命限制為多少轉。 通常指的是生產商在說明書 中提及的“壽命轉數 ”一 , 個典型值為 20*1000000 轉?？蛰d電位器電路的輸出電壓 VO 由下式?jīng)Q定 :設電阻 RL= xi/xt *Rt, 其 中 xi 為 輸入位移 , xt 為最大可能位移 , Rt 為電位器的電阻。那么輸 入電壓 VO= V* R1/(R1+( Rt-R1=V*R1/Rt=V*xi/xt*Rt/Rt=V*xi/xt 上 式表明 ,對于空載電位器輸出電 壓和輸入位移呈直線關系 .通過提高激勵電壓 V 可以獲得高的靈敏度。但是 , V 的最大值由 電位器