【圖文】軟件測試計劃與測試用例設計

1、 案例研究3：壓力/負載測試用例設計（續1） 編號 CS PIII 800 CU DS 50M B PM VM UN BW DN 應該產生的行 為 正常 結果 說明 01 10% 64MB 128M B 256M B 512M B 1024 MB 50% 30 1M 5M 10M 02 PIV1 800 PII 500 PIV2 800 PIV3 200 80% 100 MB 600 MB 30% 100 0.5M 無法響應 03 25% 15% 10 2.5M 20M 正常 04 35% 400 MB 200 MB 80% 500 0.5M 50M 無法響應 05 50% 65% 2000

2、1.5M 100M 無法響應 31 案例研究4：測試軟件對話框的界面設計 Deployment Testcase Test Case ID：62 Title： UserExitForm Path： DeploymentGeneral Author： xxxxx Purpose : make sure the dialog to test is properly designed, look for truncations, wrong tab orders, duplicated hotkeys, overlappings and any other posible issues Steps：

3、 Pre-steps: 1. Launch App. 2. Go to “Tools” / “Import/Export Settings” 3. Select “General development settings” 4. Click Reset Settings 5. If you are prompted to save your settings, click “Dont save” 6. A dialog appears telling you that the operation had been successful 32 案例研究5：測試中斷安裝軟件的功能 Purpose:

4、 Verify the app can be canceled during installation Test Steps: 1. Launch App Name 2. From the drop down menu select "File", "New" and "Project" 3. The New project Dialog box should appear 4. In “Project Types”, select “Other Project Types” and under this, “Setup and de

5、ployment”. From the “Templates” select a setup project, give the project a name for example "Deploy1" and press “OK” 5. From the “Build” menu click “Build Solution” and wait until the project has been built 6. Close the project and navigate to the folder where you saved your project 7. Dou

6、ble click the Setup folder and then double click the Debug folder 8. Click the Setup.exe to launch the Windows Installer 9. At the first stage of the wizard click the “Cancel” button and click “Yes” when asked are you sure you want to exit 10. The "Installation Interrupted" dialog appears

7、33 案例研究6：測試軟件中文大字符集的支 持 Create and structure a site with GB 18030 character App name is a very complex product, and its ability of site management as well as multimedia authoring is quite powerful. The following testcases is used to test the performance in supporting GB 18030 when creating a site. T

8、itle: Create a Blank Site with GB 18030 Character Steps： 1. Launch App name. 2. Choose File > New Site to open the site wizard. 3. Select Single User and click Next. 4. Select Blank Site to create a project folder and Click Next. 5. In Site Name field on the dialog, type in or copy/paste GB 18030 characters as site name. Click Next. 6. Choose location where you want to store all folders of this new site. Verify this new site is created, with c