本科畢業論文中小企業信貸籌資困境及對策研究

1、湖南交通工程學院畢業論文（設計） 題 目 塑件造型及注射模具 作者姓名 學 號 專 業 沖壓工藝與模具設計 指導教師 2 0 1 5年 5 月目錄摘要1. 塑件的工藝分析.()1.1塑件的材料分析.()1.2塑件的形狀尺寸精度分析.()2. 模具結構形式 2.1分型面的確定.() 2.2型腔數目的確定分布.() 2.3澆注系統的設計.()3. 注塑機的選擇.()4. 成型零件的設計 4.1結構設計.() 4.2工作尺寸計算.() 4.2.1影響塑件尺寸精度的主要因素.() 4.2.2型腔和型芯工作尺寸計算.() 4.2.3計算螺紋型芯的工作尺寸.() 4.3.4成型零件的強度、剛度計算.()5

2、.脫模推出機構的設計 5.1推出機構的組成.() 5.2設計原則.() 5.3脫模力的計算.() 5.4復位零件和排氣系統.() 6.導柱導向結構的設計 6.1導柱導向機構的作用.() 6.2導柱導套的選擇.()7.溫度系統的設計 7.1注射系統的結構設計.() 7.2冷卻系統的結構設計.() 8.模架的確定和標準件的選用 8.1模架的選擇（定模型腔板、型芯固定板、墊板尺寸）.() 8.2校核注射機（拉桿間距、開模行程）.() 8.3選用標準件（螺釘、推桿等）.() 9.模具工程圖的繪制9.1繪制模具裝配圖.()9.2繪制模具零件圖.()結論.()致謝.()參考文獻.()摘要本次課程設計課題來

3、源于生產實際，應用廣泛，但成型難度相對較難，模具結構相對復雜，對我們初學模具設計的學生是一個很好的考驗。它能加強對塑料模具成型原理的理解，同時鍛煉對塑料成型模具的設計和制造能力。本次設計以注塑模具為主線，綜合了成型工藝分析，模具結構分析，最后是模具的設計計算等一系列模具設計的所有過程。能很好的達到學以致用的效果。在設計該模具的同時結了以往模具設計的一般方法、步驟，模具設計中常用的公式、數據、模具結構及零部件。把以前學過的基礎課程融匯到綜合應用本次設計當中來，所謂學以致用。在設計中除使用傳統方法外，同時使用了 AutoCAD、ProE等軟件。 對于模具設計這個實踐性非常強的設計課題，進行了大量的

4、復習。對此我對于模具特別是塑料模具的設計步驟有了一個全新的認識，豐富了各種模具的結構和動作過程方面的知識，而對于模具的制造工藝更是實現了零的突破。在指導老師的協助下，同時在課后查閱過一些相關資料并看過一些案例了解了一些知識補充自己的不足，明確了模具的一般工作原理、制造、加工工藝。設計中，將充分利用和查閱各種資料，并與同學進行充分討論，盡最的大努力搞好本次畢業設計。 在設計的過程中，有一定的困難，但有指導老師的悉心指導和自己的努力，相信會完滿的完成畢業設計任務。由于學生水平有限，而且缺乏經驗，設計中不妥之處在所難免，肯請老師指正。關鍵詞：ABS、注射模、雙分型面一、 塑件的工藝分析1.1塑件的材

5、料分析：基本特性 ABS是由丙烯腈、丁二烯、苯乙烯共聚而成的。這三種組分的各自特性，使ABS具有良好的綜合力學性能。丙烯腈是ABS有良好的耐化學腐蝕性及表面硬度，丁二烯使ABS堅韌，苯乙烯使它有良好的加工性和染色性能。ABS無毒、無味、呈微黃色，成型的塑料件有較好的光澤。密度為1.021.05g/cm3。ABS有極好的抗沖擊強度，且在低溫下也不迅速下降。有良好的力學強度和一定的耐磨性、耐寒性、耐油性、耐水性、化學穩定性和電氣性能。水、無機鹽、堿、酸類對ABS幾乎無影響，在酮、醛、酯、氯代烴中會溶解或形成乳濁液，不溶于大部分醇類及烴類溶劑，但與烴長期接觸會軟化溶脹。ABS塑料表面受冰醋酸、植物油

6、等化學藥品的侵蝕會引起應力開裂。ABS有一定的硬度和尺寸穩定性，易于成型加工。經過調色可配成任何顏色。其缺點是耐熱性不高，連續工作溫度為70C左右，熱變形溫度約為93C左右。耐氣候性差，在紫外線作用下易變硬脆弱。根據ABS中三種組分之間的比例不同，其性能也略有差異，從而適應各種不同的應用。根據應用不同可分為超高沖擊型。高沖擊型、中沖擊型、低沖擊型和耐熱型等。主要用途 ABS在機械工業上用來制造齒輪、泵葉輪、軸承、把手、管道、電機外殼、儀表殼、儀表盤、水箱外殼、蓄電池槽、冷藏庫和冰箱襯里等、汽車工業上用ABS制造汽車擋泥板、扶手、熱空氣調節導管、加熱器等，還有用ABS夾層板制小轎車車身。ABS還

7、可用來制作水殼表、紡織器材、電器零件、文教體育用品、玩具、電子琴及收錄機殼體、食品包裝容器、農藥噴霧器及家具等。 成型特點ABS在升溫時粘度增高，所以成型壓力較高，塑料上的脫模斜度宜稍大；ABS易吸水，成型加工前應進行干燥處理；易產生溶解痕，模具設計時應注意盡量減少澆注系統對料流的阻力；在正常的成型條件下，壁厚、熔料溫度及收縮率影響極小。要求塑件精度高時，模具溫度可控制在5060，要求塑件光澤和耐熱時，應控制在6080塑料的成型工藝參數的確定查 屈華昌.塑料成型工藝與模具設計第二版，表3-1、各種塑料的注射工藝參數得：結構特點線性結構非結晶型使用溫度小于70性能特點機械強度較好，有一定耐磨性成

8、型特點成型效果好，成型前原料要干燥適用注射機類型螺桿柱塞式均可密度(g/cm)1.021.05注射壓力(MPa)7090螺桿轉速(r/min)3060計算收縮率(%)0.30.8模具溫度()5070預熱溫度()8085時間/h35吸水率24h(%)0.3拉伸屈服強度(MPa)1800抗拉屈服強度(MPa)50噴嘴溫度()180190保壓力時間（S）1530冷卻時間（S）1530料筒溫度前段（）料筒溫度中段（）料筒溫度后段（）80200C165180C150170C注射時間（S）351.2塑件的形狀尺寸精度分析： 該塑件整體結構簡單，多數為曲面特征，除了配合尺寸精度要求較高外其他尺寸精度要求相對

9、較低，但表面粗糙度要求較高，結合其材料性能，故選精度等級：MT7級。材料為ABS，成型工藝好，可以注射成型。1.精度等級：影響塑件精度的因素有很多，塑料的收縮率的波動、注塑成型條件（時間、壓力、溫度）使用的磨損程度，塑件形狀、模具結構（澆口、分型面的選擇）成型工藝條件的變化，飛邊、斜度、以及脫模斜度和成型制品的尺寸變化等等。在一般的生產設計過程中，為了降低模具的加工難度和模具的生產成本，在滿足塑件使用要求的條件下，選取等級公差，便于加工。結合本章設計具體情況，查參考文獻表3-8查的，該塑料件尺寸精度為MT7級，對應的模具精度為，2.脫模斜度：由于塑件冷卻后產生收縮，會緊緊地包住模具型芯、型腔中

10、凸出的部分，使塑件脫出困難，強行取出會導致塑件表面擦傷、拉毛。為了方便脫模，塑件設計時必須考慮與脫模（及軸心）方向平行的內、外表面，設計足夠的脫模斜度，本塑件沒有特殊狹窄細小的部位，可以不設計斜度。最小脫模斜與塑料性能、收縮率、塑件的幾何形狀等因素有關二模具結構形式2.1注射機型號的選擇模具所需塑料熔體注射量，收縮率為0.5%，計算其平均密度為1.04.一副模具所需塑料體積： V=nV1+V2=1.15nV1=8.54式中單個塑件的體積（由計算得單個塑件體積為8.54） 澆注系統的體積（在學校設計時） n初步設定的型腔數量（取2） 質量M=PV=8.97 分型面上的投影面積及所需鎖模力 塑件和

11、流道凝料在分型面上的投影面積： 式中單個塑件在分型面上的投影面積； 流道凝料在分型面上的投影面積（分流道暫定為半圓形直徑為8mm，長度為60mm)。 所需鎖模力： 式中塑料熔體對型腔的平均壓力（由查表得ABS對型腔的壓力為30MPa）2.1分型面的確定分型面對制品表面質量、尺寸精度、形位精度、脫模型腔型芯結構和排氣系統以及進料澆口都有很大的影響。此外，分型面和模具的制造方便與否也有很大的關系。因此，一定要選擇合適的分型面，選擇分型面時一般要準循以下幾個原則。1）分型面應選在塑件外形最大輪廓處當已經初步確定塑件的分型方向后分型面應選在塑件外形最大輪廓處，即通過該方向塑件的截面積最大，否則塑件無法

12、從形腔中脫出。2）確定有利的留模方式，便于塑件順利脫模從制件的頂出考慮分型面要盡可能地使制件留在動模邊，當制件的壁相當厚但內孔較小時，則對型芯的包緊力很少常不能確切判斷制件中留在型芯上還是在凹模內。這時可將型芯和凹模的主要部分都設在動模邊，利用頂管脫模，當制件的孔內有管件（無螺紋連接）的金屬嵌中時，則不會對型芯產生包緊力。3）保證制件的精度和外觀要求與分型面垂直方向的高度尺寸，若精度要求較高，或同軸度要求較高的外形或內孔，為保證其精度，應盡可能設置在同一半模具腔內。因分型面不可避免地要在制件中留下溢料痕跡或接合縫的痕跡，故分型面最好不選在制品光亮平滑的外表面或帶圓弧的轉角處。在此處鍵入公式?；?/p>

13、的外表面或帶圓弧的轉角處。4）分型面應使模具分割成便于加工的部件，以減少機械加工的困難。5）不妨礙制品脫模和抽芯。在安排制件在型腔中的方位時，要盡量避免與開模運動相垂直方向的避側凹或側孔。6）有利于澆注系統的合理處置。7）盡可能與料流的末端重合，以利于排氣。根據本該塑件的具體結構和以上確定分型面的基本原則，選擇側澆口單分型面。如圖所示：2.2型腔數目的確定及分布2.1 型腔數目的確定 為了制模具與注塑機的生產能力相匹配，提高生產效率和經濟性，并保證塑件精度，模具設計時應確定型腔數目。型腔數目的確定一般可以根據經濟性、注射機的額定鎖模力、注射機的最大注射量、制品的精度等。一般來說，大中型塑件和精

14、度要求高的小型塑件優先采用一模一腔的結構，但對于精度要求不高的小型塑件（沒有配合精度要求），形狀簡單，又是大批量生產時，若采用多型腔模具可提供獨特的優越條件，使生產效率大為提高。根據塑件的結構及尺寸精度要求,該塑件在注射時采用一模二腔。2.2.2.型腔數目的分布如圖所示：2.2澆注系統的設計澆注系統是指注射模中從主流道的始端到型腔之間的熔體進料通道，它的作用是將塑料熔體順利的充滿型腔的各個部位。正確設計澆注系統對獲得優質的塑料制品極為重要。注射成型的基本要求是在合適的溫度和壓力下使足量的塑料熔體盡快充滿型腔，影響順利充模的關鍵之一就是澆注系統的設計。5.1主流道設計 主流道通常位于模具中心塑料

15、熔體的入口處，形狀一般為圓錐形，便于熔體的流動和開模時主流道凝料的順利拔出。由于主流道和高溫塑料熔體以及注射機噴嘴反復接觸，故再設計時常設計為可拆卸更換的澆口套。5.1.1主流道的作用主流道（也叫進料口），它是連接注射機料筒噴嘴和注射模具的橋梁，也是熔融的塑料進入模具型腔時最先經過的地方。主流道的大小和塑料進入型腔的速度及充模時間長短有著密切關系。若主流道太大，其主流道塑料體積增大，回收冷料多，冷卻時間增長，使包藏的空氣增多，如果排氣不良，易在塑料制品內造成氣泡或組織松散等缺陷，影響塑料制品質量，同時也易造成進料時形成旋渦及冷卻不足，主流道外脫模困難；若主流道太小，則塑料在流動過程中的冷卻面積

16、相應增加，熱量損失增大，粘度提高，流動性降低，注射壓力增大，易造成塑料制品成形困難。主流道部分在成型過程中，其小端入口與注射機噴嘴及一定溫度、壓力的塑料熔要冷熱交替地反復接觸，屬易損件，對材料的要求較高因而模具的主流道部分常設計成可拆卸更換的主流道襯套式（俗稱澆口套），以便有效地選用鋼材單獨進行加工和熱處理。一般采用碳素工具鋼T8A、T10A等，熱處理要求淬火5357HRC。在一般情況下，主流道不直接開設在定模板上，而是制造成單獨的澆口套，鑲定在模板上。小型注射模具，批量生產不大，或者主流道方向與鎖模方向垂直的模具，一般不用澆口套，而直接開設在定模板上。澆口套是注射機噴嘴在注射模具上的座墊，在

17、注射時它承受很大的注射機噴嘴端部的壓力同時由于澆口套末端通過流道澆口與型腔相連接，所以也承受模具型腔壓力的反作用力。為了防止?jié)部谔滓驀娮於瞬繅毫Χ粔喝肽＞邇?nèi)，澆口套的結構上要增加臺肩，并用螺釘緊固在模板上，這樣亦可防止模腔壓力的反作用力而把澆口套頂出。5.1.2主流道設計要點(1) 澆口套的內孔（主流道）呈圓錐形，錐度26。若錐度過大會造成壓力減弱，流速減慢，塑料形成渦流，熔體前進時易混進空氣，產生氣孔；錐度過小，會使阻力增大，熱量損耗大，表面黏度上升，造成注射困難。(2) 澆口套進口的直徑d應比注射機噴嘴孔直徑d大0.5mm。若等于或小于注射機噴嘴直徑，在注射成型時會造成死角，并積存塑料，

18、注射壓力下降，塑料冷凝后，脫模困難。由注塑機的型號里面得知13 d = ，所以得 3.5 4.0 d= : mm。本設計取4.0mm。(3) 澆口套內孔出料口處（大端）應設計成圓角r，一般為0.53mm。(4) 澆口套與注射機噴在接觸處球面的圓弧度必須吻合。設球面澆口套球面半徑為SR，注射機球面半徑為r，其關系式如下：SRr0.51mm 澆口套球面半徑比注射機噴嘴球面半徑大，接觸時圓弧度吻合的好.三、 注射機的選擇四、 成型零件的設計1. 結構設計模具中決定塑件幾何形狀和尺寸的零件稱為成型零件，包括凹模、型芯、鑲塊、成型桿和成型環等。成型零件工作時，直接與塑件接觸，承受塑件熔體的高壓、料流的沖

19、刷、脫模時與塑件的摩擦。因此，成型零件要有正確的幾何形狀，較高的尺寸精度，較低的表面粗糙度值，還要求結構合理，較高的強度、剛度、較好的耐磨性。設計成型零件時，應根據塑件的特性和塑件的結構及使用要求，確定型腔的總體結構，選擇分型面和澆口位置，確定脫模方式、排氣部位等，根據成型零件的加工、熱處理、裝配等要求進行成型零件結構設計，計算成型零件工作尺寸，進行強度和剛度校核。2.工作尺寸計算1.型腔徑向尺寸3.影響塑件尺寸的主要因素 1.塑件收縮率的影響 塑件成型后的收縮率與塑料的品種，塑件的形狀、尺寸、壁厚，模具的結構，成型的工藝條件等因素有關。其尺寸變化值為： s=（Smax-Smin）Ls 式中

20、s為塑件收縮率波動所引起的塑件尺寸誤差 Smax為塑件的最大收縮率 Smin為塑件的最小收縮率 Ls為塑件的基本尺寸 2.模具成型零件的制造誤差 成型零件工作尺寸公差可取塑件公差的1/31/4或取IT78級作為模具制造公差。 3.模具成型零件的磨損 對于中小型塑件，最大磨損量可取塑件公差的1/6，對于大型塑件可取1/6以下。4.模具安裝配合的誤差 綜上所述，塑件在成型過程中產生的最大尺寸誤差是上述誤差的總和。即： =z+c+s+j+a 式中為塑件的成型誤差 z為模具成型零件制造誤差 C為模具成型零件在使用中最大磨損量 S為塑件收縮率波動所引起的塑件尺寸誤差 J為模具成型零件因配合間隙變化而引起

21、塑件尺寸的誤差 A為因安裝固定成型零件而引起的塑件尺寸誤差您好，為你提供優秀的畢業論文參考資料，請您刪除以下內容，O(_)O謝謝！A large group of tea merchants on camels and horses from Northwest Chinas Shaanxi province pass through a stop on the ancient Silk Road, Gansus Zhangye city during their journey to Kazakhstan, May 5, 2015. The caravan, consisting of mo

22、re than 100 camels, three horse-drawn carriages and four support vehicles, started the trip from Jingyang county in Shaanxi on Sept 19, 2014. It will pass through Gansu province and Xinjiang Uygur autonomous region, and finally arrive in Almaty, formerly known as Alma-Ata, the largest city in Kazakh

23、stan, and Dungan in Zhambyl province. The trip will cover about 15,000 kilometers and take the caravan more than one year to complete. The caravan is expected to return to Jingyang in March 2016. Then they will come back, carrying specialty products from Kazakhstan A small art troupe founded six dec

24、ades ago has grown into a household name in the Inner Mongolia autonomous region. In the 1950s, Ulan Muqir Art Troupe was created by nine young musicians, who toured remote villages on horses and performed traditional Mongolian music and dances for nomadic families. The 54-year-old was born in Tongl

25、iao, in eastern Inner Mongolia and joined the troupe in 1975.He says there are 74 branch troupes across Inner Mongolia and actors give around 100 shows every year to local nomadic people. I can still recall the days when I toured with the troupe in the early 80s. We sat on the back of pickup trucks

26、for hours. The sky was blue, and we couldnt help but sing the folk songs, Nasun says. The vastness of Inner Mongolia and the lack of entertainment options for people living there, made their lives lonely. The nomadic people were very excited about our visits, Nasun recalls. We didnt have a formal st

27、age. The audience just sat on the grass. Usually, the performances became a big party with local people joining in. For him, the rewarding part about touring isnt just about sharing art with nomadic families but also about gaining inspiration for the music and dance. Ulan Muqir literally translates

28、as red burgeon, and todays performers of the troupe still tour the regions villages and entertain nomadic families, but their fame has spread around the world. On May 16 and 17, nearly 100 singers and dancers from the troupe performed at Beijings Poly Theater. Their show, titled Ulan Muqir on the Gr

29、assland, depicted the history and development of the art troupe. Being from the region allowed me to embrace the culture of Inner Mongolia and being a member of the troupe showed me where I belonged, Nasun, the art troupes president, who is also a renowned tenor, tells China Daily. During a tour in

30、1985, he went to a village and met an elderly local man, who told him a story about his friendship with a solider from Shenyang, capital of Northeast Chinas Liaoning province, decades ago. The solider gave the old man a handmade saddle when they bid farewell. The story inspired Nasun to write Carved

31、 Saddle, a song that later became one of his most popular numbers. Now, every year, Nasun recruits young singers and dancers for the troupe. The troupe has also designed a new repertoire, which is mostly based on the daily lives of Mongolian people, especially the lives of nomadic families, and has

32、combined contemporary musical elements with folk songs of the region. Haimu, a 25-year-old khoomei (a local variant of overtone singing) singer, joined the troupe three years ago. Along with a six-member band, he performs fast songs and soft ones that he writesall while playing the horse-head fiddle

33、.Although I learned the piano since childhood and grew up listening to various kinds of music, to me, the folk music of Inner Mongolia is the root, he says. Performing in remote villages is pleasant. I feel at home on the boundless grasslands, and the warm people there make me feel fulfilled. The fi

34、rst round of spring auction season in Beijing ended last week, but it failed to create much spring in the art market. Although two pieces of Chinese painting fetched more than 100 million yuan, the decline in trading volume and sale rate showed a downturn this year. In the “Grand View: Chinese Paint

35、ing Highlight” session at China Guardian 2015 spring auctions, Pan Tianshous representative work Eagle, Rock and Flora hit a record auction price of 279 million yuan, while Li Kerans masterwork Jinggang Mountain fetched 126.5 million yuan, an unexpected high in recent years. However, the trading vol

36、ume fells to 1.87 billion yuan from 2.22 billion yuan in the same period the year before. The Huangchen 2015 Spring Auctions, which recorded 42.5 million yuan in total sales, experienced the same. The section number went down to 5 from 12 compared to last year. According to expert Shao Jianwu, the a

37、rt market did not attract much excitement this year due to the booming stock market and the persistent problems of forgery and fake deals. The two pieces of Chinese painting notched up high price this spring due to their own value not due to a revival in the market. The successful transaction of two

38、 works with a hammer price of more than 100 million yuan once again confirms that valuable and rare works of high quality always earn the long-lasting high price. Chinese painting and calligraphy is still the pillar of the market. However, the overall sales rate has dropped slightly, which reflects

39、the demand for the ordinary auction goods has weakened,” said the president of China Guardians Hu Yanyan. Besides, the entry of new buyers also makes certain changes to the direction of purchasing. In a word, the overall market trend is very unpredictable. Although China Guardian 2015 Spring Auction

40、s has achieved remarkable results, it does not mean that the market has walked out of the predicament. We still have to wait for the big economic boom to invigorate the art market.” Even so, the hot pursuit of some special items appeared this spring. A special session of China Guardian Spring Auctio

41、ns titled “Fine GiltBronze Buddhist Images” achieved a great deal with total sales volume of 41.89 million yuan and 92 percent sale rate. The 5th Shamar Rinpoche Statue from 16-17th century of Tibet was sold for 5.06 million yuan. The Beijing Chengxuan Auctions featured almost 2,800 items of coins a

42、nd stamps in three sessions with good sale rate. The Huachen Auctions also set a special session of photographs under the condition of large-scale decline of auction sessions. There was a palpable dull thud of disappointment that accompanied the return of the imperial entourage of Zhen Huan to her h

43、omeland. It followed a couple years of hushed excitement as Chinese fans were fed tidbits about their proud concubine who was supposed to conquer the high ground of the North American market. Zhen Huan is, of course, the title character of The Legend of Zhen Huan, a 2011 television series that swept

44、 China off its feet and later took other Asian countries by storm. Two years ago, it was reported that HBO, a premium cable service headquartered in the United States, was going to air it in North America after some modification. Now, a condensed version that provides English subtitles but no dubbin

45、g has finally been made available on Netflix for online streaming. This version, highly anticipated as a milestone in Chinas cultural foray overseas, has been widely panned by its home audience. Retitled Empresses in the Palace, the American version has been shortened from its original 76 episodes a

46、t 45 minutes each, to six 90-minute episodes. The quick pacing threw off many native viewers, who are accustomed to a more leisurely daytime-soap-style narrative rhythm. (Chinese TV stations would run two or three episodes every day.) I did not finish the full-length version and found the truncated

47、one not difficult to follow. Whats lost, I believe, are the interesting setups and pauses that illuminate the Chinese art of storytelling. Much of the plot is still there. It is the flavor that was sacrificed. The American edition uses the framework of the Empress Dowager in her senior years reminis

48、cing at the beginning and the end of each episode, hinting at whats to come and recapping the key points. This device, not used in the original, is culturally understandable but artistically mediocre. What puzzles me is the two new songs for the opening and end credits. They were written in English,

49、 but sung by Chinese with an uncomfortable accent. They were obviously designed to appeal to an English-speaking base, but do not jibe with the Chinese dialogue. Speaking of the dialogue, the English translation, picked apart by some Chinese, is too literal for my taste. I can imagine a typical Amer

50、ican hit by a flurry of royal ranks, addresses and greetings, even multiple names and titles for the same person. The first half hour must be a swamp to wade through, very much like my experience of getting through a Tolstoy tome with its endless inflections of names transliterated into lengthy Chin

51、ese. I see the choice of verbatim translation as an effort for conveying exotica. It is fairly competent, with no error that I could detect, but fails to rise above words or capture the essence of the language. A cultural product usually crosses over to a foreign territory first by an emphasis on the commonalities. But whether inside or outside China, the temptation to sell it for the differences is just too great. Sure, the sumptuous sets and costumes are a big attraction, but the narrative technique has becomehow shall I put it?a bit anglicized, which is necessary