通過USB口來升級ICG2000

1、通過USB口來升級ICG2000ICG2000有多種升級方式，本文介紹通過USB口來升級ICG2000的軟件版本，這種方式也是最方便、最快的。本次將把ICG2000軟件版本從R1614升級到R1816P01。一、升級步驟1、確認ICG2000的當前版本和flash空間<H3C>dis verH3C Comware Platform SoftwareComware Software, Version 5.20, Release 1614Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. All rights reserved.H3

2、C ICG2000 uptime is 0 week, 2 days, 19 hours, 28 minutesLast reboot 2007/01/01 00:00:06System returned to ROM By <Reboot> Command.CPU type: FREESCALE MPC8323E 333MHz256M bytes DDR SDRAM Memory16M bytes Flash MemoryPcb Version: 3.0Logic Version: 1.0Basic BootROM Version: 1.11Extended BootROM Ve

3、rsion: 1.13SLOT 0AUX (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/0 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/1 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/2 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/3 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/4 (Hardware)3.0, (Driver)1.0, (

4、Cpld)1.0SLOT 2WLAN (Hardware)2.0, (Driver)1.0, (Cpld)0.0<H3C>dirDirectory of flash:/ 0 -rw- 13491156 Jan 01 2007 01:52:49 icg2000-cmw520-r1614.bin 1 -rw- 1131 Jan 01 2007 00:11:36 hello.cfg 2 -rw- 1540 Jan 01 2007 00:28:21 startup.cfg15113 KB total (1931 KB free)<H3C>2、刪除flash文件，以留出足夠的空間

5、從第一步操作可以看出，flash空間只有1.9M，而版本文件有13.4M之多。在這里，只要將原來的版本文件刪除即可，即刪除icg2000-cmw520-r1614.bin，如下操作：<H3C>delete flash:/icg2000-cmw520-r1614.bin .Delete flash:/icg2000-cmw520-r1614.bin?Y/N:y.%Delete file flash:/icg2000-cmw520-r1614.bin.Done.<H3C>reset re<H3C>reset recycle-bin ? /force Clear

6、all the files in recycle-bin at one time <cr> <H3C>reset recycle-bin /通過delete命令無法徹底刪除原有文件，必須要清空回收站Clear flash:/icg2000-cmw520-r1614.bin ?Y/N:yClearing files from flash may take a long time. Please wait.%Cleared file flash:/icg2000-cmw520-r1614.bin.<H3C>dirDirectory of flash:/ 0 -r

7、w- 1131 Jan 01 2007 00:11:36 hello.cfg 1 -rw- 1540 Jan 01 2007 00:28:21 startup.cfg15113 KB total (15106 KB free) /再次查看flash空間，發現已經有15M左右的空余了<H3C>3、首先將版本文件拷貝到U盤根目錄下：4、將存有版本文件的U盤插到ICG2000的USB口插入U(xiǎn)盤后，出現如下提示：<H3C>%Jan 3 19:28:49:941 2007 H3C VFS/4/LOG: uf1: inserted into slot 0. <H3C>d

8、ir uf1:/ /查看U盤內容，發現R1618P01文件已經存在Directory of uf1:/ 0 -rw- 13491156 Apr 01 2008 05:16:00 icg2000_ct-cmw520-r1618p01.bin974964 KB total (948352 KB free)File system type of uf1: FAT32<H3C>5、將U盤中的文件拷貝到flash中<H3C>copy uf1:/icg2000_ct-cmw520-r1618p01.bin flash:/Copy uf1:/icg2000_ct-cmw520-r16

9、18p01.bin to flash:/icg2000_ct-cmw520-r1618p01.bin?Y/N:y.%Copy file uf1:/icg2000_ct-cmw520-r1618p01.bin to flash:/icg2000_ct-cmw520-r1618p01.bin.Done.<H3C><H3C>dir /查看是否將文件拷貝到了flash中Directory of flash:/ 0 -rw- 13743652 Jan 03 2007 19:36:14 icg2000_ct-cmw520-r1618p01.bin 1 -rw- 1131 Jan 0

10、1 2007 00:11:36 hello.cfg 2 -rw- 1540 Jan 01 2007 00:28:21 startup.cfg15113 KB total (1684 KB free)<H3C>6、指定R1618P01為下次重啟的啟動文件，并重啟設備<H3C>boot-loader file flash:/icg2000_ct-cmw520-r1618p01.bin main This command will set the boot file. Continue? Y/N:y. The specified file will be used as th

11、e main boot file at the next reboot!<H3C>reboot Start to check configuration with next startup configuration file, please wait.DONE! This command will reboot the device. Current configuration will be lost in next startup if you continue. Continue? Y/N:y#Jan 3 19:39:25:775 2007 H3C DEV/1/REBOOT

12、: Reboot device by command. %Jan 3 19:39:25:775 2007 H3C DEV/4/SYSTEM REBOOT: System is rebooting now.7、重啟后確認是否升級成功通過display version查看運行的版本是否是R1618P01。<H3C>dis verH3C Comware Platform SoftwareComware Software, Version 5.20, Release 1618P01Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. Al

13、l rights reserved.H3C ICG2000 uptime is 0 week, 0 day, 0 hour, 12 minutesLast reboot 2007/01/01 00:00:07System returned to ROM By <Reboot> Command.CPU type: FREESCALE MPC8323E 333MHz256M bytes DDR SDRAM Memory16M bytes Flash MemoryPcb Version: 3.0Logic Version: 1.0Basic BootROM Version: 1.15Ex

14、tended BootROM Version: 1.17SLOT 0AUX (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/0 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/1 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/2 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/3 (Hardware)3.0, (Driver)1.0, (Cpld)1.0SLOT 0ETH0/4 (Hardware)3.

15、0, (Driver)1.0, (Cpld)1.0SLOT 2WLAN (Hardware)2.0, (Driver)1.0, (Cpld)0.08、修改默認配置文件從R1614版本升級到R1618P01及以后版本，需要修改默認配置文件，修改后重啟設備。H3C_hidecmdNow you enter a hidden command view for developer's testing, some commands may affect operation by wrong use, please carefully use it with our engineer's

16、direction.H3C-hidecmdoem-flag function enable OEM flag function enable now!H3C-hidecmdoem-flag set slot 0 ICGCT /這里的名字必須是ICGCTSet OEM flag to EEPROM succeeded!H3C-hidecmdquitH3Cquit<H3C>reboot二、注意事項1、升級過程中一定要保證設備穩定運行，不能掉電；2、一定要確保flash空閑空間足夠，delete后還要reset；3、如果ICG2000不能認出U盤，請更換U盤再試，一般ICG2000能夠讀出所有U盤；4、如果升級失敗或遇到其他問題，請致電H3C免費服務熱線800-810-0504或400-810-0504三、關于新版本說明1、升級到R1618P01版本后，通過LAN口（即PC連接到ICG2000的LAN口，四個LAN接口中的任意一個）來登錄，用戶名和密碼分別為：useradm