測控技術與儀器專業英語翻譯殷虹河北工業大學適用

1、測控專業英語翻譯Unit 1 Measurement, Control and Instrumentation Instrumentation is defined as the art and science of measurement and control. Instrumentation engineers are responsible for controlling a whole system like a power plant. 譯為：儀器可定義為測量和控制的藝術和科學。儀器工程師負責控制整個系統，比如一個電廠。 An instrument is a device that

2、 measures and/or regulates process variables such as flow, temperature, level, or pressure. Instruments include many varied contrivances that can be as simple as valves and transmitters, and as complex as analyzers. 譯為：儀器是一種用來測量和/或調節過程變量（如流量、溫度、液位或壓力）的裝置。儀器包括許多不同的設備，可以像閥和變送器那樣簡單，也可以像分析儀那樣復雜。Instrume

3、nts often comprise control systems of varied processes such as refineries, factories, and vehicles. The control of processes is one of the main branches of applied instrumentation. Instrumentation can also refer to handheld devices that measure some desired variable. Diverse handheld instrumentation

4、 is common in laboratories, but can be found in the household as well. For example, a smoke detector is a common instrument found in most western homes. 譯為：儀器通常由如精煉廠、工廠和車輛這些不同流程的控制系統組成。過程控制是實用儀器的主要分支之一。儀器也可以是測量某個所需變量的手持設備。多樣化的手持式儀器常見于實驗室，在日常生活中也可以發現。例如：煙霧探測器是西方家庭中的一種常見儀器。Output instrumentation inclu

5、des devices such as solenoids, valves, regulators, circuit breakers, and relays. These devices control a desired output variable, and provide either remote or automated control capabilities. These are often referred to as final control elements when controlled remotely or by a control system. 句中desi

6、red output variable意為“期望輸出變量”，are referred to as意為“被稱為”。 全句譯為：輸出儀器包括線圈、閥、調節器、斷路器和繼電器等元件。這些元件控制期望輸出變量，使之實現遠程或自動控制功能。在遠程控制或自動控制系統中，稱這些元件為終端控制元件。 Transmitters are devices that produce an output signal, often in the form of a 420mA electrical current signal, although many other options using voltage, fr

7、equency, pressure, or ethernet are possible. This signal can be used for informational purposes, or it can be sent to a PLC, DCS, SCADA system, LabView or other type of computerized controller, where it can be interpreted into readable values and used to control other devices and processes in the sy

8、stem. 譯為：變送器是產生某種輸出信號的裝置，通常是 420mA的電流信號，當然也可以是電壓、頻率、壓力或以太網。這個信號可作參考之用，還可以發送到PLC、DCS、SCADA系統、LabView或其它類型的計算機控制器，這個信號被轉換成可讀值，用于控制系統中的其它設備和過程。Control Instrumentation plays a significant role in both gathering information from the field and changing the field parameters, and as such are a key part of c

9、ontrol loops. 句中field意為“現場”，control loops意為“控制回路”。 全句譯為：控制儀器在現場信息采集和現場參數轉換中都起到了重要作用。這本身是控制回路的一個關鍵部分。History In the early years of process control, process indicators and control elements such as valves were monitored by an operator that walked around the unit adjusting the valves to obtain the desir

10、ed temperatures, pressures, and flows. As technology evolved pneumatic controllers(氣壓式調節器) were invented and mounted（安裝，配有）in the field that monitored the process and controlled the valves. 譯為：在早年的過程控制中，過程指標和控制元件，如閥，是由操作員在裝置周圍走動通過調節閥門來監測，以獲得所需的溫度、壓力和流量。隨著技術的發展，氣壓式調節器發明了，并安裝于監測過程和控制閥的現場。This reduced

11、the amount of time process operators were needed to monitor the process. Later years the actual controllers were moved to a central room and signals were sent into the control room to monitor the process and outputs signals were sent to the final control element such as a valve to adjust the process

12、 as needed. 譯為：這樣就減少了過程操作員監測過程所需的時間。近幾年，實際控制轉移到中央控制室，信號被發送到控制室來監測過程，并且輸出信號被送到終端控制元件，如閥門，根據需要調節過程。These controllers and indicators were mounted on a wall called a control board. 譯為：這些控制器和指示器安裝稱為控制面板的壁面上。The operators stood in front of this board walking back and forth monitoring the process indicator

13、s. This again reduced the number and amount of time process operators were needed to walk around the units. The basic air signal used during these years was 315 psig(磅/平方英寸).譯為：操作員在面板前面來回走動以監測過程指示器。這就再次減少了過程操作員在裝置周圍來回走動所需的時間。這幾年使用的基本氣壓信號是3-15磅/平方英寸。In the 1970s electronic instrumentation began to be

14、 manufactured by the instrument companies. Each instrument company came out with their own standard signal for their instrumentation, 1050mA, 0.251.25V, 010V, 15V, and 420mA, causing only confusion until the 420mA was universally used as a standard electronic instrument signal for transmitters and v

15、alves. 譯為：20世紀70年代儀器公司開始生產電子儀器。每個儀器公司為他們的儀器裝置推出了自己的標準信號：如1050mA, 0.251.25V, 010V, 15V, 和420mA，這只會引起混亂，直到420mA被普遍作為變送器和閥的標準電子儀器信號。The transformation of instrumentation from mechanical pneumatic transmitters, controllers, and valves to electronic instruments reduced maintenance costs as electronic ins

16、truments were more dependable than mechanical instruments. This also increased efficiency and production due to their increase in accuracy. 句中reduced為transformation的謂語，as引導原因狀語從句。全句譯為：從機械氣動變送器、控制器和閥的控制方式向電子儀器控制方式的轉變，降低了維修成本，因?yàn)殡娮觾x器比機械儀器更可靠。同時由于精度的提高，從而提高了工作效率和產量。The next evolution of instrumentation

17、came with the production of Distributed Control Systems (DCS). The pneumatic and electronic control rooms allowed control from a centralized room, DCS systems allowed control from more than one room or control stations. These stations could be next to each other or miles away. Now a process operator

18、 could sit in front of a screen and monitor thousands of points throughout a large unit or complex.譯為：伴隨著分散式控制系統（DCS）的產生，儀器有了進一步的發展。氣動控制和電氣控制室允許來自一個集中室的控制，DCS系統允許來自多個控制臺的控制。這些控制臺可以是相鄰的，也可以相隔千里?，F(xiàn)在過程操作員可以坐在屏幕前監控整個裝置和設備的成千上萬的點。Measurement Instrumentation is usually used for measurement. Measurement is

19、the process or the result of determining the magnitudes of many parameters (physical values). These parameters include: （1）Chemical composition；化學成分 （2）Chemical properties； 化學性質 （3）Properties of light； 光的特性 （4）Vibration； 振動 （5）Weight； 重量 （6）Voltage 電壓 （7）Inductance； 電感 譯為：儀器通常用于測量。測量是確定一些參數（物理值）的大小的

20、過程或結果。（8）Capacitance； 電容（9）Resistivity； 電阻（10）Viscosity； 粘度（11）Other mechanical properties of materials；材料的其它機械性能（12）Properties of ionising radiation；電力輻射的性質（13）Frequency； 頻率（14）Current； 電流（15）Pressure, either differential or static；壓力（差壓或靜壓）（16）Flow； 流量（17）Temperature；溫度（18）Levels of liquids；液位等（19

21、）Density. 密度With the exception of a few seemingly fundamental quantum constants, units of measurement are essentially arbitrary; in other words, people make them up and then agree to use them. 句中With the exception of意為“除以外”，quantum constants意為“量子常數”。 全句譯為：除了少數看上去代表基本法則的量子常數以外，測量的單位實質上是很主觀的，換句話說，人們編制

22、并愿意使用它就可以了。Nothing inherent in nature dictates that an inch has to be a certain length, or that a mile is a better measure of distance than a kilometre. Over the course of human history, however, first for convenience and then for necessity, standards of measurement evolved so that communities would

23、 have certain common benchmarks（基準）. Laws regulating measurement were originally developed to prevent fraud （欺詐，欺騙行為；騙子） in commerce. 譯為：本質上沒有任何內在的事物決定：一英寸必須是某一特定的長度，或者一英里較一公里是一個較好的距離度量。然而，在人類歷史的過程中，首先是為了方便起見，然后因?yàn)楸匾瑴y(cè)量標準逐漸形成了以便使社會有特定的共同基準。最初制定法律規范尺度就是為了防止商業欺詐。Measurement methods are often scrutinize

24、d（仔細檢查，詳審） for their validity, applicability, and accuracy. It is very important that the scope of the measurement method be clearly defined, and any aspect included in the scope is shown to be accurate and repeatable through validation. 譯為：通常要審核測量方法的有效性、適用性和準確性。明確界定測量方法的使用范圍是非常重要的，并且這個范圍里的任何方面通過驗證被

25、證明是正確的和可復驗的。 Measurement method validations often encompass（圍繞；包圍）the following considerations: 譯為：測量方法的驗證通常包括以下注意事項：（1）Accuracy and precision: Demonstration of accuracy may require the creation of a reference value if none is yet available. 準確度和精確度。如果目前沒有任何有效值，準確度的驗證可能需要規定一個參考值。（2）Repeatability and

26、 Reproducibility, sometimes in the form of a Gauge R&R. 重復性和再現性，有時是以量規“R&R”的形式表示。（3）Range, or a continuum scale over which the measurement method would be considered accurate. Example: 10N to 100N force test. 在量程或連續的范圍內，測量方法被視為是準確的。例如：10N到100N的力測試。（4）Measurement resolution, be it spatial, te

27、mporal, or otherwise. 測量分辨率是空間的、時間的，或其它形式。（5）Curve fitting, typically for linearity, which justifies interpolation between calibrated reference points. 曲線擬合,通常為直線擬合，這證明標準參考點之間的插值法是正確的。（6）Robustness, or the insensitivity to potentially subtle variables in the test environment or setup which may be di

28、fficult to control. 魯棒性，或是對測試環境中潛在的細微變量或難以控制的裝置的不敏感度。（7）Usefulness to predict end-use characteristics and performance. 實用性，用來預測最終用途的特點和性能。（8）Measurement uncertainty. 測量不確定度。（9）Interlaboratory or round robin tests. 多個實驗室進行的或循環的測試。（10）other types of measurement systems analysis.測量系統分析的其它類型。Control In

29、addition to measuring field parameters, instrumentation is also responsible for providing the ability to modify some field parameters. Modern day control engineering (also called control systems engineering) is a relatively new field of study that gained a significant attention during 20th century w

30、ith the advancement in technology. 譯為：除了測量現場參數，儀器還負責提供修改某些現場參數的能力。 現代控制工程（也叫控制系統工程）是一個比較新的研究領域，隨著科技的進步，在20世紀這個領域得到了顯著的關注。It can be broadly defined as practical application of control theory. Control engineering has an essential role in a wide range of control systems, from simple household washing m

31、achines to high-performance F-16 fighter aircraft. 譯為：它大致可以被定義為控制理論的實際應用。在廣泛的控制系統中，如從簡單的家用洗衣機到高性能的F-16戰斗機，控制工程起著很重要的作用。It seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors; use control systems design tools t

32、o develop controllers for those systems; and implement controllers in physical systems employing available technology. 主語it代指“control engineering”，句子中的3個并列成分understand，use和implement為seeks to的賓語。全句譯為：控制工程根據輸入、輸出和不同性質的各種元件，建立數學模型，分析物理系統。使用控制系統設計工具來為這些系統開發控制器。在物理系統中運用有效的技術來執行這些控制器。A system can be mecha

33、nical, electrical, fluid, chemical, financial and even biological, and the mathematical modeling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. 譯為：系統可以是機械、電氣、流體、化工、金融，甚至是生物，數學建模、分析和控制器的設計

34、采用控制理論的時間、頻率和復數（s）域中的一個或多個，的取決于設計問題的性質。1Control theory There are two major divisions in control theory, namely, classical and modern, which have direct implications over the control engineering applications. The scope of classical control theory is limited to single-input and single-output (SISO) sy

35、stem design. 譯為：控制理論中有兩個重要的部分，即經典控制理論和現代控制理論，它們對控制工程應用有著直接的影響。經典控制理論的應用范圍局限于單輸入和單輸出（SISO）系統設計。The system analysis is carried out in time domain using differential equations, in complex-s domain with Laplace transform or in frequency domain by transforming from the complex-s domain. All systems are a

36、ssumed to be second order and single variable, and higher-order system responses and multivariable effects are ignored. 譯為：系統用微分方程實現時域分析，用拉氏變換實現復數（s）域分析，或?qū)?fù)數域轉換到頻域分析。所有系統都被假定為二階和單變量系統，高階系統響應和多變量影響被忽略。A controller designed using classical theory usually requires on-site tuning due to design approxima

37、tions. Yet, due to easier physical implementation of classical controller designs as compared to systems designed using modern control theory, these controllers are preferred in most industrial applications. The most common controllers designed using classical control theory are PID controllers. 譯為：

38、由于設計的近似性，使用經典控制理論設計的控制器通常需要現場調整。然而，由于和使用現代控制理論設計的系統相比，經典控制器的設計具有較簡單的物理實現性，所以這些控制器是大多數工業應用中的首選。使用經典控制理論設計的最常見的控制器是PID控制器。In contrast, modern control theory is carried out in the state space, and can deal with multi-input and multi-output (MIMO) systems. This overcomes the limitations of classical con

39、trol theory in more sophisticated（精密的，尖端的） design problems, such as fighter aircraft control. In modern design, a system is represented as a set of first order differential equations defined using state variables. 譯為：相比之下，現代控制理論是建立在狀態空間基礎上的，并且可以處理多輸入多輸出（MIMO）系統。這就克服了經典控制理論在更復雜的設計問題（如戰斗機控制）中的局限性。在現代設

40、計中，系統表示為一組使用狀態變量描述的一階差分方程。Nonlinear, multivariable, adaptive and robust（魯棒，健壯的） control theories come under this division. Being fairly new, modern control theory has many areas yet to be explored. Scholars like Rudolf E. Kalman and Aleksandr Lyapunov are well-known among the people who have shaped

41、modern control theory. 譯為：非線性、多變量、自適應和魯棒控制理論歸入這一部分（現代控制理論）?，F(xiàn)代控制理論作為相當新的理論，仍有許多領域有待探索。在發展現代控制理論的人當中，像魯?shù)婪駿·，卡爾曼和亞歷山大·李亞普諾夫這樣的學者是眾所周知的。2Control systems Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems

42、) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical many are. And hence control engineering is often viewed as a subfield of electrical engineering. 譯為：控制工程是工程學科，其重點在于不同范圍動態系統（如機械系統）的建模和導致這些系統以所期望的方式工作的控制器設計。

43、盡管那些控制器并一定是電氣的，但大多數控制器是電氣的。因此控制工程常被認為是電氣工程的子領域。However, the falling price of microprocessors is making the actual implementation of a control system essentially trivial. As a result, focus is shifting back to the mechanical engineering discipline, as intimate knowledge of the physical system being c

44、ontrolled is often desired. 譯為：然而，微處理器價格的下降使得控制系統的實際執行實質上是微不足道的。因此，重點移回機械工程學科，它作為受控制的物理系統聯系緊密的知識，通常是可以期望獲得的。Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propu

45、lsion（推進）systems of commercial airliners to the cruise（巡航）control present in many modern automobiles. 譯為：電路，數字信號處理器和微控制器都可以用來實現控制系統?？刂乒こ逃兄鴱V泛的應用范圍：從商用客機的飛行和推進系統到在許多現代車輛中存在的巡航控制。In most of the cases, control engineers utilize feedback when designing control systems. This is often accomplished using a

46、PID controller system. For example, in an automobile with cruise control the vehicles speed is continuously monitored and fed back to the system, which adjusts the motors torque(扭轉力，轉（力）矩）accordingly. 譯為：在大多數情況下，控制工程師在設計控制系統時利用了反饋。這通常使用PID控制器系統完成。例如：在有巡航控制的汽車上，車輛的速度不斷被監測并反饋給相應調節電機扭矩的系統。Where th

47、ere is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability to be achieved. 譯為：哪里有定期反饋，控制理論就能被用于確定系統如何響應這樣的反饋。實際中，所有這類系統的穩定性是很重要的，并且控制理論有助于確保穩定性的實現。Altho

48、ugh feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a predetermined cycle without the use of sensors.

49、譯為：雖然反饋是控制工程的一個重要方面，但是控制工程師也可能從事于無反饋系統的控制。這就是開環控制。開環控制的一個典型例子是：一臺洗衣機沒有使用傳感器，而是通過預先設定的周期工作。3Recent advancement Originally, control engineering was all about continuous systems. Development of computer control tools posed a requirement of discrete control system engineering because the communications

50、between the computer-based digital controller and the physical system are governed by a computer clock. The equivalent to Laplace transform in the discrete domain is the z-transform. Today many of the control systems are computer controlled and they consist of both digital and analog components. 譯為：

51、本來，控制工程是所有關于連續系統的。計算機控制工具的發展提出了離散控制系統工程的要求，因?yàn)榛谟?jì)算機的數字控制器和物理系統之間的通信是由計算機時鐘控制的。在離散域中相當于拉普拉斯變換的是z變換?，F(xiàn)今許多控制系統是由計算機控制的，并且它們是由數字和模擬元件組成的。Therefore, at the design stage either digital components are mapped into the continuous domain and the design is carried out in the continuous domain, or analog componen

52、ts are mapped in to discrete domain and design is carried out there. The first of these two methods is more commonly encountered in practice because many industrial systems have many continuous systems components, including mechanical, fluid, biological and analog electrical components, with a few d

53、igital controllers. 譯為：因此，在設計階段，或是數字元件被映射到連續域，并且在連續域中進行，或是模擬元件映射到離散域并在離散域進行設計。這兩種方法首先是在實踐中較常遇到的，因?yàn)楹芏喙I(yè)系統有許多帶有連續系統元件，包括：機械、流體、生物和模擬電氣元件，而有很少的數字控制器。Similarly, the design technique has progressed from paper-and-ruler based manual design to computer-aided design, and now to computer-automated design (CA

54、utoD), which has been made possible by evolutionary computation. 譯為：同樣的，設計技術已經從基于紙張和直尺的手工設計發展到計算機輔助設計，如今向計算機自動設計（ CAutoD ）發展。CAutoD can be applied not just to tuning a predefined control scheme, but also to controller structure optimisation, system identification and invention of novel control syste

55、ms, based purely upon a performance requirement, independent of any specific control scheme. 句中not just tobut also to意為“不僅而且”，novel control systems意為“新型系統”。全句譯為：計算機自動設計（CAutoD）不僅能用于預定義控制模式的調整，而且可以用于控制器結構優化、系統辨識和新型系統的開發。這一切都僅僅基于設計的性能要求，而不依賴于任何具體的控制模式。Instrumentation engineering Instrumentation engine

56、ering is the engineering specialization focused on the principle and operation of measuring instruments that are used in design and configuration of automated systems in electrical, pneumatic domains etc. 譯為：儀器工程是專業化的工程領域，其重點是測量儀器的原理和操作，他們應用于電氣、氣動等領域的自動化系統的設計和配置。They typically work for industries wi

57、th automated processes, such as chemical or manufacturing plants, with the goal of improving system productivity, reliability, safety, optimization, and stability. To control the parameters in a process or in a particular system, devices such as microprocessors, microcontrollers or PLCs are used, bu

58、t their ultimate aim is to control the parameters of a system. 譯為：為了提高系統的生產率、可靠性、安全性、最優化和穩定性，儀器工程很典型地運用于有自動化流程的工業，如化工廠或制造廠。為了控制某一個流程或特定系統中的參數，要使用微處理器、微控制器或PLC這樣的設備，其最終目的是控制系統的參數。Instrumentation technologists Instrumentation technologists, technicians and mechanics specialize in troubleshooting(發現并修理故障，解決紛爭)and repairing and maintenance of instruments and instrumentation systems. This trade is so intertw