Hi3511V110可靠性試驗報告

1、Hisilicon Technologies Co.,Ltd.Product versionConfidentiality levelV110SecretProduct name:Hi3511Total pages: 9The Reliability Test Report Of Hi3511/Hi3512Date 2008-12-01Date 2008-12-01Date 2008-12-01Prepared by 羅靜芳 Reviewed by 湛燦輝 Granted by 夏君海思半導(dǎo)體有限公司Catalog TOC o 1-5 h z HYPERLINK l bookmark18 o

2、Current Document Instruction3 HYPERLINK l bookmark21 o Current Document 1、Definition4 HYPERLINK l bookmark24 o Current Document Preconditioning Testing (PC ) .4 HYPERLINK l bookmark29 o Current Document Temperature Cycling (TC)4 HYPERLINK l bookmark33 o Current Document Highly Accelerated Stress Tes

3、t (HAST)5 HYPERLINK l bookmark37 o Current Document High Temperature Operational Life (HTOL)5 HYPERLINK l bookmark41 o Current Document Electrostatic Discharge :Human Body Model5Latch-Up Test6Product Reliability7Pre-condition Test: level III.7High Accelerated Stress Test7Temperature Cycling Test8Hig

4、h Temperature Operation Test8 HYPERLINK l bookmark49 o Current Document ESD-Human Body Mode8Latch-up Test9InstructionThis report is published by Hisilicon to provide insight to our customers regarding the reliability of Hisilicon products. Reliability is defined as product performance to specificati

5、on over time in response to varied environmental stress conditions. The ultimate goal of our reliability program is to achieve continuous improvement in the robustness of the product being evaluated.As part of this program, finished product reliability is measured periodically to ensure that the pro

6、duct performance meets or exceeds internal and external reliability specifications. Reliability programs are executed in response to internal programs as well as to individual customer requirement. All tests are performed or supervised by experienced Hisilicon employees using facilities that are app

7、roved and audited by Hisilicon for compliance to the requirements of JEDEC and MIL-STD-883.1、DefinitionPreconditioning Testing (PC)The Surface Mount Preconditioning Test is used to model the surface mount assembly conditions during component solder processing. Consistent with JEDEC JESD22-A113A “Pre

8、conditioning Procedures of Plastic Surface Mount Devices Prior to Reliability Testing”，the devices are subjected to bake for 24 hrs, at 125C to baseline the package moisture content, a controlled moisture soak for 192 hrs, a t 30C/60% R. H., followed by 3 thermal cycles through a reflow simulation t

9、emperature profile. This preconditioning is consistent with JEDEC Moisture Sensitivity Level 3 thermal package moisture sensitivity and dry-pack storage requirements.Temperature Cycling (TC)The temperature cycling test is intended to assess the producfs ability to withstand temperature changes in a

10、field use situation such as system On/Off temperature changes, night/day, and/or severe storage extremes. The test is used to determine the ability of the component and solder interconnects to withstand thermomechanical stresses induced by alternating high and low temperature extremes. The test proc

11、edure follows the general guidelines listed in the JEDEC standard JESD22-A104-B. Electrical testing at the interim and final read points ensures that the units on test continue to meet data sheet specifications.Highly Accelerated Stress Test (HAST)The HAST test is performed for the purpose of evalua

12、ting the reliability of products in humid environments. It is a highly accelerated test that employs temperature and humidity under non-condensing conditions to accelerate the penetration of moisture into the product (into the underfill, substrate, etc.). The test is used to assess the robustness of

13、 the product, its mechanical integrity, the adhesion strength between interfaces, and susceptibility to corrosion in the presence of ionic contaminants. The test procedure follows the general guidelines listed in the JEDEC standard JESD22-A118. The typical test parameters used are 96 hours at 1309/8

14、5% Relative Humidity (RH).High Temperature Operational Life (HTOL)HTOL is used to accelerate failure mechanisms which may be activated through elevated operational temperatures and elevated voltage. All devices receive full and standard production screening prior to receiving HTOL stress. Full Elect

15、rical test is performed at each read point to verify that the product meets data sheet parameters. Early Life (EL) is defined as the first 4k hours of field operation. Inherent Life (IL) is defined as 26k hrs of field operation in addition to the 4k Early Life field hours. The IL portion of the bath

16、 tube curve is constant failure rate indicating the intrinsic product reliability. Extended Life (XL) is defined as 70k hrs of field operation. This portion of the stress verifies that any wear out mechanisms have not been initiated.Electrostatic Discharge : Human Body ModelThis method is used to cl

17、assify components for ESD susceptibility from human handling and to determine the limits of the product in an average production environment when handled by humans. The discharge waveform is intended to approximate the ESD event from a human fingertip to a pin of the component while other pins are a

18、t ground potential.1.6 Latch-Up TestLatch-up characteristics are extremely important in determining product reliability and minimizing No Trouble Found(NTF) and Electrical Overstress(EOS) failures due to latch-up. This testing is performed to assure a product does not enter a latch up state when exp

19、osed to over/under-voltage conditions on supply pins or over/under-current on signal pins.2. Product ReliabilityPre-condition Test : level IIIReference ProcedureJEDED22-A113DTest ParameterSAM Analysis& Function TestTest StructureHi3511V110VehiclePackage type: BGA441MethodBaking 24h at 125C;Moisture

20、soaking at the temperature and humidity: 30C,60%RH,192h;Reflowing solder IR at 26 OCand immersing in 3x flux for 10 sec.Sample size154pcsPass/Fail JudgmentPass PC functional test(A/R=0/1)Test resultPassHigh Accelerated Stress TestReference ProcedureJEDED22-A110BTest ParameterFunction TestTest Struct

21、ureHi3511V110VehiclePackage type: BGA441MethodHAST 130C/85%RH/96hrs , UnbiasSample size77pcsPass/Fail JudgmentPass HAST 96hr function test(A/R=0/1)Test resultPassTemperature Cycling TestReference ProcedureJEDED22-A104BTest ParameterSAM Analysis& Function TestTest StructureHi3511V110VehiclePackage type: BGA441Method-40C + 115C(air to air), 500 cycleSample size77pcsPass/Fail JudgmentPass 500 cycle function test(A/R=0/1)Test resultPassHigh Temperature Operation TestReference ProcedureJEDED22-A104BTest ParameterFunction TestTest StructureHi3511V110VehicleP