DFM報告模板備課講稿

1、DFM報告模板AutomotiveMedicalTelcoConsumer/ITPart &Tool info Part &Tool info 產品產品/ / 模具基本信息模具基本信息Revision info/Revision info/版本信息版本信息2D Drawing Rev/2D2D Drawing Rev/2D圖紙版本圖紙版本 - -Tool Spec.Tool Spec. Rev/Rev/模具規格版本模具規格版本 - - Mold flow analysis Rev/Mold flow analysis Rev/模流分析版本模流分析版本 - -Part Info/

2、Part Info/產品信息產品信息Plastic Material/Plastic Material/塑料材料塑料材料- -Shrinkage/Shrinkage/縮水率縮水率 - -General Thickness/General Thickness/產品平均厚度產品平均厚度- -Surface Texture -Surface Texture -模具零件表面要求模具零件表面要求 - -Others/Others/其它特殊要求其它特殊要求 - -Mold Info/Mold Info/模具信息模具信息Type of Moldbase -Type of Moldbase -Slider/S

3、lider/滑塊滑塊- -Lifter/Lifter/斜頂斜頂- -Cavities/Cavities/模穴數模穴數- -Part View/配有外形尺寸的產品圖配有外形尺寸的產品圖Pls confirm/請確認請確認: YES _ NO_AutomotiveMedicalTelcoConsumer/ITAutomotiveMedicalTelcoConsumer/ITAutomotiveMedicalTelcoConsumer/ITAutomotiveMedicalTelcoConsumer/ITMaterial for Main Parts of Tool/模具主要零件材料模具主要零件材料

4、給出模具主要零件的材料給出模具主要零件的材料型腔材料；型腔材料；型芯材料；型芯材料；滑塊材料；滑塊材料；斜頂材料；斜頂材料；鑲件材料。鑲件材料。AutomotiveMedicalTelcoConsumer/ITGate/澆口澆口Pls confirm/請確認請確認: YES _ NO_提供澆口數量和類型，如有必要，需配以提供澆口數量和類型，如有必要，需配以模流分析的結果說明模流分析的結果說明AutomotiveMedicalTelcoConsumer/ITDraft Angle/拔模角拔模角Pls confirm/請確認請確認: YES _ NO_提供產品的前后側拔模檢查顯示圖，建議未建拔模面

5、提供產品的前后側拔模檢查顯示圖，建議未建拔模面的拔模角。的拔模角。AutomotiveMedicalTelcoConsumer/ITThickness/厚度分析厚度分析Pls confirm/請確認請確認: YES _ NO_AutomotiveMedicalTelcoConsumer/ITGeometry issue1/其它技術問題點其它技術問題點請確認請確認: YES _ NO_Uniform wall thickness 縮水融接線薄膠薄鐵Part stickingCoolingFlashing potentialCore out requirementsPoke yoke for bu

6、ttons1st and 2nd shot gating (2K Mold)2shot wash-off issues2shot shut off areasShut off anglesProduct holding areasAutomotiveMedicalTelcoConsumer/ITGeometry issue2/其它技術問題點其它技術問題點請確認請確認: YES _ NO_Uniform wall thickness 縮水融接線薄膠薄鐵Part stickingCoolingFlashing potentialCore out requirementsPoke yoke for

7、buttons1st and 2nd shot gating (2K Mold)2shot wash-off issues2shot shut off areasShut off anglesProduct holding areasAutomotiveMedicalTelcoConsumer/ITEject Pin Layout/頂針及位置Pls confirm/請確認請確認: YES _ NO_Suggest the ejector type and location on the part.AutomotiveMedicalTelcoConsumer/ITEngraving Details/刻字要求Pls confirm/請確認請確認: YES _ NO_Request customer to identify engraving locations for,請選擇刻字的內容和要求請選擇刻字的內容和要求,Part Numer/產品編號-Recycle symbol/循環利用標志-