施工升降機外防護施工方案

1、We will continue to improve the companys internal control system, and steady improvement in ability to manage and control, optimize business processes, to ensure smooth processes, responsibilities in place; to further strengthen internal controls, play a control post independent oversight role of ev

2、aluation complying with third-party responsibility; to actively make use of internal audit tools detect potential management, streamline, standardize related transactions, strengthening operations in accordance with law. Deepening the information management to ensure full communication zero resistan

3、ce. To constantly perfect ERP, and BFS+, and PI, and MIS, and SCM, information system based construction, full integration information system, achieved information resources shared; to expand Portal system application of breadth and depth, play information system on enterprise of Assistant role; to

4、perfect daily run maintenance operation of records, promote problem reasons analysis and system handover; to strengthening BFS+, and ERP, and SCM, technology application of training, improve employees application information system of capacity and level. Humanistic care to ensure zero. To strengthen

5、ing Humanities care, continues to foster company wind clear, and gas are, and heart Shun of culture atmosphere; strengthening love helped trapped, care difficult employees; carried out style activities, rich employees life; strengthening health and labour protection, organization career health medic

6、al, control career against; continues to implementation psychological warning prevention system, training employees health of character, and stable of mood and enterprising of attitude, created friendly fraternity of Humanities environment. To strengthen risk management, ensure that the business of

7、zero risk. To strengthened business plans management, will business business plans cover to all level, ensure the business can control in control; to close concern financial, and coal electric linkage, and energy-saving scheduling, national policy trends, strengthening track, active should; to imple

8、mentation State-owned assets method, further specification business financial management; to perfect risk tube control system, achieved risk recognition, and measure, and assessment, and report, and control feedback of closed ring management, improve risk prevention capacity. To further standardize

9、trading, and strive to achieve according to law, standardize and fair. Innovation of performance management, to ensure that potential employees zero fly. To strengthen performance management, process control, enhance employee evaluation and levels of effective communication to improve performance ma

10、nagement. To further quantify and refine employee standards . Work, full play party, and branch, and members in five type Enterprise construction in the of core role, and fighting fortress role and pioneer model role; to continues to strengthening four good leadership construction, full play levels

11、cadres in enterprise development in the一、編制依據1建筑施工手冊2、建筑施工扣件式鋼管腳手架安全技術規范（JGJ130-2001）3、建筑施工安全檢查標準（JGJ59-99） 二、工程概況三、材料要求1、鋼管腳手架采用外徑48mm、壁厚3.5mm鋼管，鋼管外表面銹蝕深度不大于0.5mm，鋼管上嚴禁打孔。2、扣件使用前應進行質量檢查，發現有裂縫、變形的嚴禁使用。滑絲的螺栓必須更換，并應進行防銹處理。3、底座采用50mm厚木板鋪設，木板上設鋼板底座。4、腳手板采用木腳手板，寬度不小于200mm，厚度不小于50mm，兩端用直徑4 mm的鍍鋅鐵絲箍?jī)傻馈８嗟哪_

12、手板不得使用。 5、密目網和安全平網應符合國家驗收規范的要求，并經現場試驗合格。 四、基礎設置落地腳手架基礎設置在混凝土墊層上，立桿下鋪50mm厚木腳手板并放置150150mm鋼板底座。 五、腳手架搭設防護腳手架為雙排落地鋼管腳手架，總高m，腳手架42.45m以下為雙立桿，42.45m- m改為單立桿。腳手架立桿縱距（la）為0.9m、1.5m、0.9m、1.5m、0.9m（計算取1.5m），立桿橫距（lb）為0.9m，橫桿步距（h）為1.2m，內立桿距建筑物外墻皮0.3m，采用單桿剪刀撐（如附圖所示）。1、腳手架必須設置縱橫向掃地桿。縱向掃地桿應采用直角扣件固定在距底座上皮150mm處的立桿

13、上。橫向掃地桿也采用直角扣件固定在緊靠縱向掃地桿下方的立桿上。2、每根立桿底部應設置50mm厚墊板。內立桿距建筑物外墻皮0.3m，采用單桿剪刀撐。立桿必須用連墻件與建筑物可靠連接。立桿接長必須采用對接扣件連接，立桿上的對接扣件應交錯布置，兩根相鄰立桿的接頭不應設置在同步內，同步內隔一根立桿的兩個相隔接頭在高度方向錯開的距離不小于500mm，各接頭中心至主節點的距離不宜大于步距的1/3。3、縱向水平桿設置在立桿內側。橫向水平桿在主節點處必須設置，用直角扣件扣接且嚴禁拆除。主節點處兩個直角扣件的中心距不應大于150mm?？繅σ欢说耐馍扉L(zhǎng)度為150mm。4、作業層上橫向水平桿兩端均采用直角扣件固定在

14、縱向水平桿上，間距750mm。作業層腳手板應鋪滿、鋪穩，離開墻面120-150mm。鋪設時可采用對接鋪設，也可采用搭接鋪設。對接鋪設時，接頭處必須設置兩根橫向水平桿，腳手板外伸長度130-150mm，兩塊腳手板外伸長度的和不應大于300mm。搭接鋪設時，接頭必須支在橫向水平桿上，搭接長度應大于200mm，其伸出橫向水平桿的長度不應小于100mm。其板長兩端均應與支承桿可靠的固定。5、連墻件采用短鋼管用扣件固定在剪力墻洞口，沿洞口高度上、中、下設置三道，連墻件宜靠近主節點設置，偏離主節點的距離不大于300mm。6、剪刀撐設置如附圖所示。7、安全防護隨搭設進程及時裝設連墻件和剪刀撐，裝設作業層間橫

15、桿，鋪設腳手板和裝設作業層欄桿、擋腳板；搭設過程中密目外網須全封閉。外腳手架采用立體防護，外側除洞口位置外滿掛密目網，網的顏色要一致且均掛在腳手架外立桿內側，用合乎要求的系繩按網眼系牢在大橫桿上，網與網的連接要靠緊并用系繩綁好。操作層在腳手架外側大橫桿與腳手板之間設置1.2m高防護欄桿和擋腳板，擋腳板高度200mm，立放在腳手板上，板與板要靠緊，并用操作層的腳手板擠牢。中欄桿應居中設置。六、腳手架搭設注意事項1、外徑48mm與51mm的鋼管?chē)?yán)禁混合使用。2、當搭至有連墻點的構造點時，在搭設完該處的立桿、縱向水平桿、橫向水平桿后，應立即設置連墻件。3、對接扣件的開口要朝向架子的內側，螺栓朝上，直

16、角扣件的開口不得朝下，以確保安全。4、在主節點處固定橫向水平桿、縱向水平桿、剪刀撐、橫向斜撐等用的直角扣件、旋轉扣件的中心點的相互距離不應大于150mm。5、螺栓擰緊扭力矩不應小于40Nm，且不應大于65Nm，各桿件端頭伸出扣件蓋板邊緣的長度不應小于100mm。6、剪刀撐、橫向斜撐應隨立桿、縱向和橫向水平桿等同步搭設。七、腳手架搭設質量要求1、立桿的垂直偏差為100mm，同一排大橫桿的水平偏差不大于50mm。2、腳手架步距、橫距偏差為20mm，縱距偏差為50mm。3、同跨內兩根縱向水平桿高差為10mm。4、橫向水平桿外伸長度為200mm，允許偏差為-50mm。八、腳手架拆除1.腳手架拆除前，由

17、工長進行拆除安全技術交底。2.清除腳手架上雜物及地面障礙物。3.拆除作業必須由上而下逐層進行，嚴禁上下同時作業。4.連墻件必須隨腳手架逐層拆除，嚴禁先將連墻件整層或數層拆除后再拆腳手架；分段拆除高差不大于2步。5.當腳手架拆至最后一根長立桿的高度時，應先在適當位置搭設臨時拋撐后再拆除連墻件。6.拆下的扣件和配件要及時運至地面并按品種、規格隨時碼放，各構配件嚴禁拋擲至地面。7.拆除時地面設監護人，嚴禁無關人員進入危險區。九、安全技術措施1.腳手架搭設人員必須是經過按現行國家標準特種作業人員安全技術考核管理規則（GB5036）考核合格的專業架子工。上崗人員應定期體檢，合格者方可上崗。2.搭設腳手架

18、人員必須戴安全帽、系安全帶、穿防滑鞋。 3.腳手架的構配件質量與搭設質量，應按規范要求進行檢查驗收，合格后方準使用。 4. 當有六級及六級以上大風和霧、雨天氣時應停止腳手架搭設與拆除作業。雨后上架作業應有防滑措施。5. 在腳手架使用期間，嚴禁拆除主節點處的縱、橫向水平桿，縱、橫向掃地桿和連墻件。6. 不得在腳手架基礎及其鄰近處進行挖掘作業，否則應采取安全措施，并報主管部門批準。7. 在腳手架上進行電、氣焊作業時，必須有防火措施和專人看守。8. 腳手架接地、避雷措施應按施工現場臨時用電安全技術規范（JGJ46）的有關規定執行。9. 搭拆腳手架時，地面應設圍欄和警戒標志，并派專人看守，嚴禁非操作人

19、員入內。10. 臨電線路不得掛在腳手架上。十、附圖仿佛頃刻間，亞運就來到了我們身邊。一個普通的人，很難想象它背后隱藏著多少人的心血，藏匿著多少人的汗水，背負著多少人的夢想，寄托了多少人的祝愿，在這個激動人心的時刻，在這個萬眾矚目的地方of backbone backbone role; to full strengthening members youth work, full play youth employees in company development in the of force role; to improve independent Commission against c

20、orruption work level, strengthening on enterprise business key link of effectiveness monitored. , And maintain stability. To further strengthen publicity and education, improve the overall legal system. We must strengthen safety management, establish and improve the education, supervision, and evaluation as one of the traffic safety management mechanism. To conscientiously sum up the Olympic security controls, promoting integrated management to a higher level, higher standards, a higher level of development. Employees, today is lunar calendar on December 24, t