英國焊接標準

1、英國焊接標準英國焊接標準英國焊接標準(BS welding standards)ANSI | BS | DIN | EN | GB | ISO | JIS | NF |DIC編號中文名稱英文名稱BS 1722-10-2006柵欄.鏈節和焊接篩網的防 盜柵欄用規范Fences - Specification for anti-intruder fences in chain link and welded meshBS 1894-1992焊接結構的電熱鍋爐的設 計和制造規范Specification for design and manufacture of electric boilers o

2、f welded constructionBS 2790-1992焊接結構的殼式鍋爐的設 計和制造規范Specification for design and manufacture of shell boilers of welded constructionBS 2S 510-1970碳鋼薄板和帶材規范（430/540 MPa）（適用于焊 接）Specification for carbon steel sheet and strip (430/540 MPa) (suitable for welding)BS 2S 511-1970深拉碳鋼薄鋼板和帶材的規范（280/400 MPa）（適

3、用 于焊接）Specification for deep drawing carbon steel sheet and strip (280/400 MPa) (suitable for welding)BS 2S 514-1969碳鉆鋼薄板和帶材規范（淬 火和回火條件:77/100MPa）（適用于焊 接）Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding)BS 2

4、S 515-1969碳鉆鋼薄板和帶材規范（退 火的）（退火條件:46/59MPa）（適用于焊 接）Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding)BS 2s 92-1964飛機材料規范.碳鉆鋼（適 用于焊接）（40/55噸力/平 方英寸；限定等圓斷面4英 寸）Specification for aircraft material - Carbon-manganese

5、steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)BS 2T 66-198019/10銘-鍥耐腐蝕鋼管材規范（花穩定的:550MPa）（可焊接）Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)BS 2T 68-1980冷拉18/10銘-鍥耐腐蝕鋼 管材規范（花穩定的:800MPa）（可焊接）Specification f

6、or cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)BS 3604-2-1991承壓鋼管.具有規定高溫特 性的鐵合金鋼.第2部分： 縱向電弧焊接管規范Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudina

7、lly arc welded tubesBS 3799-1974石油工業用鋼管配件、螺旋 管接頭和套管焊接規范Specification for steel pipe fittings, screwed and socket-welding for the petroleum industryBS 3T 53-1980銘-鋁鋼管材規范（700MPa）（管外徑不小于12.5mm）（可焊接）Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weld

8、able)BS 4129-1990板材鋼電阻焊用焊接底劑、 焊透密封劑、粘合劑和蠟規 范Specification for welding primers and weld-through sealants, adhesives and waxes for resistance welding of sheet steelBS 4449-2005+A2-2 009混凝土增強鋼.可焊接增強 鋼.棒材、卷材和拆卷產品. 規范Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coiland deco

9、iled product - SpecificationBS 4515-1-2009陸地和近海鋼管焊接規范. 碳和碳鉆鋼管Specification for welding ofsteel pipelines on land andoffshorePart 1: Carbon and carbon manganesesteel pipelinesBS 4515-2-1999陸地和近海鋪設的鋼管焊 接規范.雙聯法不銹鋼管道Specification for welding of steel pipelines on land and offshore - Duplex stainless ste

10、el pipelinesBS 4871-3-1985按認可焊接工藝操作的焊 工鑒定考試規范.第3部 分:金屬管與管板接頭間電 弧焊Specification for approval testing of welders working to approved welding procedures -Arc welding of tube to tube-plate joints in metallic materialsBS 4872-1-1982/、要求才匕準焊接程序的焊 工考試規范.第1部分：鋼 熔焊Specification for approval testing of welder

11、s when welding procedure approval is not required - Fusion welding of steelBS 4872-2-1976/、要求才匕準焊接工藝時焊 工的鑒定考試規范.第2部 分：鋁及鋁合金鴇極惰性氣 體保護電弧焊或熔化極惰 性氣體保護Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloysBS 499-1 Sup

12、plement-199 2焊接術語與符號.補充.電 焊設備的定義Welding terms and symbols - Supplement - Definitions for electric welding equipmentBS 499-1-2009焊接術語和符號.焊接、釬 焊和熱切割用術語表Welding terms and symbolsPart 1: Glossary for welding, brazing andthermal cuttingBS 499-2C-1999焊接術語與符號.圖表形式 的的歐洲電弧焊符號Welding terms and symbols - Europ

13、ean arc welding symbols in chart formBS 4T 45-1972碳-鉆鋼管材規格（700 N/mm）（管外徑大 于或等于12.5mm）（可焊 接）Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable)BS 5950-2-2001建筑物中結構用的鋼制件. 材料、制造和裝配規范.軋 制及焊接型材Structural use of steelwork in building - Specifica

14、tion for materials, fabrication and erection - Rolled and welded sectionsBS 5S 21-1964飛機材料規范.20號碳鋼（適用于焊接）（25/35噸力/平方英寸：最大直徑或最小斷面尺寸6英寸）Specification for aircraft material - 20 carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension)BS 638-4-1

15、996電弧焊電源、設備和附件. 第4部分：焊接電纜規范Arc welding power sources, equipment and accessories - Specification for welding cablesBS 6942-2-1989氧燃料氣體焊接和相關工 藝用成套小型工具的設計 和建造.第2部分：使用可 充氧氣和燃?xì)馊萜鞯某商?工具規范Design and construction of small kits for oxy-fuel gas welding and allied processes -Specification for kits using refil

16、lable gas containers for oxygen and fuel gasBS 6990-1989含有工藝流體或其殘留物 的鋼管焊接實用規程Code of practice for welding on steel pipes containing process fluids or their residualsBS 7122-1989液化氣體道路運輸用的焊 接鋼樽車規范Specification for welded steel tanks for the road transport of liquefiable gasesBS 7363-1990焊接用受控?zé)釓?qiáng)度試驗和 疊

17、珠焊縫板試驗方法Method for bead-on-plate (BOP) test for weldsBS 7372-3-1993工業金屬絲篩網和金屬絲Guide to the choice of編織布孔徑和絲徑組合選 擇指南.第3部分：預壓接 或壓力焊接金屬絲篩網的 優選組合aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for pre-crimped or pressure-welded wire

18、screensBS 7448-2-1997斷裂機械韌性試驗.第2部 分:金屬材料焊接的 KDOWNIDOWNc臨界 CTOD 值和臨界J值的測定方法Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materialsBS7655-2.4-2000電纜用絕緣和鎧裝材料規 范.橫向耦合彈性鎧裝化合 物.焊接電纜包敷物Specification for insulating and sheathin

19、g materials for cables - Cross-linked elastomeric sheathing compounds - Welding cable coveringBS 7670-2-1997電阻凸焊的鋼螺母和螺栓. 焊接螺母和螺栓的焊接規 范Steel nuts and bolts for resistance projection welding - Specification for welding of weld nuts and weld boltsBS 8451-2004氣焊切割和相關工藝用橡 膠軟管.圖度耐扭結重型焊 接軟管（H型）.規范Rubber ho

20、ses for gas welding, cutting and allied processes -High kink-resistant heavy duty welding hose (type H)- SpecificationBS 855-1990集中供熱和間接熱水供應 用焊接鋼鍋爐（額定輸出 44KWE 3MW）fi范Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)BS 91-1998電纜焊接插座.

21、規范Electric cable soldering sockets - SpecificationBS 9210N0009-1-1978射頻連接器（SMC系列）詳 細規范.不密封、焊接、靜 態接觸、50 Q、螺紋連接.Detail specification for radio frequency connectors (series SMC) - Unsealed,BS 9210 N007-1-1976射頻連接器（SMB型）的詳 細規范.不密封、焊接、靜 態接觸、50Q、插入式連接.全面評定級Detail specification for radio frequency connecto

22、rs (type SMB) - Unsealed, soldered, captive contact, 50 $2I, snap-on couplings - Full assessment levelBS 9210 N007-2-1976射頻連接器（SMB型）的詳 細規范.不密封、焊接、靜 態接觸、50 Q、連接扣.控 制圖.配合面詳圖和測量數 據Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on coup

23、lings - Control drawings - Mating face details and gauge informationBS 9612N016-1979振蕩器用電阻焊接密封石 英晶體元件用詳細規 范.DN、DZ DQ和DP外殼、 0.8 20MH卻 3.0 30MHz 頻率范圍.寬溫范Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQand DPenclosures, 0. 8 to 20 MHz and 3.0

24、 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation全面評定級soldered, captive contact, 50 $2I, screw coupling - Full assessment levelBS 9210N0009-2-1978射頻連接器（SMA系列）詳 細規范.不密封、焊接、靜 態接觸、50 Q、螺紋連接. 控制圖.配合面詳圖和測量 數據Detail specification for radio frequency connectors (series S

25、MC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge informationBS 9210 N001-1-1975射頻連接器（BNC型）的詳 細規范.50。的密封、焊 接、靜態接觸.全面評定級Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Ful

26、l assessment levelover wide temperature ranges (non-temperature controlled) - Full assessment levelBS 9612N017-1979振蕩器用電阻焊接密封石 英晶體元件用詳細規 范.DN、DZ DQ和DP外殼、 0.8 20MH卻 3.0 30MHz 頻率范圍.窄溫范Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQand DPenc

27、losures, 0. 8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment levelBSDDCENSO/TS15011-5-2006焊接和相關工藝的衛生和 安全.煙塵和氣體取樣的試 驗室方法.通過完全或部分 有機材料組成的產品焊接 或切割時所Health and safety in weld

28、ing and allied processes - Laboratory method for sampling fume and gases - Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materialsBSDDCENSO/TS 17845-2004焊接和相關程序.缺陷的名 稱與符號系統Welding and allied processes-Designatio

29、n system for imperfectionsBS DD CEN/TS 14751-2004焊接.焊接檢驗用飛行時間 衍射技術(TOFD)的使用Welding - Use of time-of-flight diffraction technique (TOFD) for examination of weldsBS DD ENV 10080-1996混凝土加強筋用鋼.可焊肋 狀鋼筋B500.棒材、卷材和 焊接鋼筋網的交付技術狀 態Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B50

30、0 - Technical delivery conditions for bars, coils and welded fabricBS EN 10025-3-2004結構鋼熱軋制品.正火/正 火熱機軋制的可焊接細粒 結構鋼的交貨技術條件Hot rolled products of structural steels - Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steelsBS EN 10025-4-2004結構鋼熱軋制品.熱機軋制 的可焊接細粒

31、結構鋼的交 貨技術條件Hot rolled products of structural steels - Technical delivery conditions for thermomechanical rolled weldable fine grain structural steelsBS EN 10028-6-2009壓力容器用鋼制扁平產品. 可焊接淬火和回火細粒鋼Flat products made of steels for pressure purposes - Part 6:Weldable fine grain steels, quenched and tempered

32、BS EN 10080-2005混凝土增強用鋼.可焊接增 強鋼.總則Steel for the reinforcement of concrete - Weldable reinforcing steel - GeneralBS EN 1011-1-2009焊接.金屬材料焊接用推薦 規程.弧焊用一般指南Welding - Recommendations for welding of metallic materials - General guidance for arc weldingBS EN 1011-2-2001焊接.金屬材料焊接的推薦 規范.鐵素體鋼的電弧焊接Welding - Re

33、commendations for welding of metallic materials - Arc welding of ferritic steelsBS EN 1011-3-2000焊接.金屬材料焊接的推薦 規范.不銹鋼的電弧焊接Welding - Recommendations for welding of metallic materials - Arc welding of stainless steelsBS EN 1011-4-2000焊接.金屬材料焊接的推薦 規范.鋁及鋁合金的電弧焊 接Welding - Recommendations for welding of m

34、etallic materials - Arc welding of aluminium and aluminium alloysBS EN 1011-5-2003焊接.金屬材料焊接的推薦 規程.覆層鋼的焊接Welding - Recommendations for welding of metallic materials - Welding of clad steelBS EN 1011-6-2005焊接.金屬材料焊接的建 議.第6部分：激光束焊接Welding - Recommendations for welding of metallic materials - Part 6: La

35、ser beam weldingBS EN 1011-7-2004焊接.金屬材料焊接的推薦 規范.電子束焊Welding - Recommendations for welding of metallic materials - Electron beam weldingBS EN 1011-8-2004焊接.金屬材料焊接的推薦 規范.鑄鐵的焊接Welding - Recommendations for welding of metallic materials - Welding of cast ironsBS EN 10120-2008焊接的儲氣瓶用鋼薄板材 和帶材Steel sheet

36、and strip for welded gas cylindersBS EN 10217-1-2002承壓用焊接鋼管.交付技術 狀態.規定室溫特性的非合 金鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature propertiesBS EN 10217-2-2002承壓用的焊接鋼管.交付技 術狀態.規定r高溫特性的 非合金和合金電焊鋼管Welded steel tubes for pre

37、ssure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesBS EN 10217-3-2002承壓用的焊接鋼管.交付技 術狀態.合金細晶粒鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubesBS EN承壓用的焊接鋼

38、管.交付技Welded steel tubes for10217-4-2002術狀態.規定了低溫特性的 非合金和合金電焊鋼管pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature propertiesBS EN 10217-5-2002承壓用的焊接鋼管.交付技 術狀態.規定r高溫特性的 非合金和合金埋弧焊接鋼 管Welded steel tubes for pressure purposes - Technic

39、al delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesBS EN 10217-6-2002承壓用的焊接鋼管.交付技 術條件.規定r低溫特性的 非合金埋弧焊接鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with

40、specified low temperature propertiesBS EN 10217-7-2005壓力用途焊接鋼管.交貨技 術條件.不銹鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubesBS EN 10219-1-2006非合金和細晶結構鋼的冷 成形焊接結構空心型材.交 貨技術要求Cold formed welded structural hollow sections of non-alloy and fine grain steels

41、- Technical delivery requirementsBS EN 10219-2-2006非合金和細晶結構鋼的冷 成形焊接結構空心型材.公 差、尺寸和局部特性Cold formed welded structural hollow sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional propertiesBS EN 10220-2002無縫和焊接鋼管.尺寸和每 單位長度的質量Seamless and welded steel tubes - Dimensions and

42、massesper unit lengthBS EN 10222-4-1999壓力容器用鋼鍛件.具啟高 驗收強度的可焊接細晶粒 鋼Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strengthBS EN 10223-4-1998柵欄用鋼絲和鋼絲制品.鋼 絲焊接網式柵欄Steel wire and wire products for fences - Steel wire welded mesh fencingBS EN 10223-7-2002欄柵用鋼絲和金屬絲制品. 欄柵用鋼

43、絲焊接網板Steel wire and wire products for fences - Steel wire welded panels - For fencingBS EN 10225-2009固定近海結構的可焊接結 構鋼.技術提交條件Weldable structural steels for fixed offshore structures - Technical delivery conditionsBS EN 10246-1-1996鋼管的無損檢驗.證明液壓 系統密封性用無縫和焊接 鐵磁鋼管（埋弧焊除外）的 自動電磁檢驗Non-destructive testing of s

44、teel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightnessBS EN 10246-11-2000鋼管的無損檢驗.對無縫和 焊接鋼管進行液體滲透試 驗以檢測其表面缺陷Non-destructive testing of steel tubes - Liquid penetrant testing of seamless

45、 and welded steel tubes for the detection of surface imperfectionsBS EN 10246-12-2000鋼管的無損檢驗.對無縫和 焊接鐵磁鋼管進行磁粉檢 驗以檢測其表面缺陷Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfectionsBS EN 10246-13-2000鋼

46、管的無損檢驗.無縫和焊 接鋼管（埋弧焊除外）的全Non-destructive testing of steel tubes - Automatic full外圍自動超聲波厚度檢測peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubesBS EN 10246-14-2000鋼管的無損檢驗.層狀缺陷 探測用無縫和焊接（埋弧焊 接除外）鋼管的自動超聲波 檢驗Non-destructive testing of steel tubes - Auto

47、matic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfectionsBS EN 10246-15-2000鋼管的無損檢驗.無縫和焊 接鋼管（埋弧焊除外）的全 外圍自動超聲波厚度檢測Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of

48、welded steel tubes for the detection of laminar imperfectionsBS EN 10246-16-2000鋼管的無損檢驗.對焊接鋼 管焊縫臨近區域進行自動 超聲波檢驗以檢測其層狀 缺陷Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfectionsBS EN 102

49、46-17-2000鋼管的無損檢驗.對無縫和 焊接鋼管管端部進行超聲 波檢驗以檢測其層狀缺陷Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfectionsBS EN 10246-18-2000鋼管的無損檢驗.對無縫和 焊接鐵磁鋼管管端部進行 磁粉檢驗以檢測其層狀缺 陷Non-destructive testing of steel tubes - Magnet

50、ic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfectionsBS EN 10246-2-2000鋼管的無損檢驗.驗證水密 封性能用的無縫和焊接的 （埋弧焊除外）奧氏體鐵素 體鋼管的自動渦流試驗Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except subm

51、erged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightnessBS EN 10246-3-2000鋼管的無損檢驗.缺陷探測 用無縫和焊接（埋弧焊除 外）鋼管的自動渦流檢驗Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes

52、for the detection of imperfectionsBS EN 10246-5-2000鋼管的無損檢驗.縱向缺陷 探測用無縫和焊接（埋弧焊 除外）的鐵磁性鋼管的自動 全周界磁力換能器/磁力線 滲漏檢驗Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for t

53、he detection of longitudinal imperfectionsBS EN 10246-7-2005鋼管的無損檢驗.縱向缺陷 探測用無縫焊接鋼管（埋弧 焊除外）的自動全周界超聲 波檢驗Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfectio

54、nsBS EN 10246-9-2000鋼管的無損檢驗.檢測縱向 或橫向缺陷用的焊接和埋 弧焊鋼管的自動超聲波試 驗Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfectionsBS EN 10255-2004焊接或加螺紋的非合金鋼 管.交貨技術條件Non-alloy steel tu

55、bes suitable for welding and threading - Technical delivery conditionsBS EN 10296-1-2003機械和一般工程用焊接圓 鋼管.技術交貨條件.非合 金和合金鋼管Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubesBS EN 10296-2-2005機械和一般工程用焊接圓 鋼管.技術交貨條件.

56、不銹 鋼Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steelBS EN 10305-2-2010精密儀器用鋼管.交貨技術 條件.焊接冷拔鋼管Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubesBS EN 10305-3-2010精密儀器用鋼管.交貨技術 條件.焊

57、接冷精加工鋼管Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubesBS EN 10305-5-2010精密設備用鋼管.交貨技術 條件.焊接和冷精加工的方 形及矩形鋼管Steel tubes for precision applications - Technical delivery conditions - Welded and cold sized square and rectangular tubesBS EN 10305-6-2005精密儀器用鋼

58、管.交貨技術 條件.第6部分：液壓和氣 動動力系統用焊接冷拉管 材Steel tubes forprecisionapplications Technicaldeliveryconditions Part 6: Welded cold drawn tubes forhydraulic and pneumatic powersystemsBS EN 10312-2003包括人生活用水在內的水 成液輸送用焊接/、銹鋼管. 交貨技術條件Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water

59、 for human consumption -Technical delivery conditionsBS EN 1043-1-1996金屬材料焊接的破壞試驗. 硬度試驗.第1部分：電弧 焊接的硬度試驗Destructive tests on welds in metallic materials -Hardness testing - Hardness test on arc welded jointsBS EN 1043-2-1997金屬材料焊接點的破壞試 驗.第2部分：焊接連接件 的顯微硬度試驗Destructive tests on welds in metallic materi

60、als -Hardness testing - Micro hardness testing on welded jointsBS EN 1123-1-1999污水系統用插接管的縱向 焊接熱浸鍍鋅鋼管及配件. 要求、試驗和質量控制Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality controlBS EN 1123-2-2006+A1 -2